1 / 45

Information Transmission

Information Transmission. Course: CIS 3003 Fundamental of Information Technology. This ppt file covers material in Chapter 8 – 10. Objective. How binary streams are physically generated and transmitted with modulation.

sammy
Download Presentation

Information Transmission

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Information Transmission Course: CIS 3003 Fundamental of Information Technology

  2. This ppt file covers material in Chapter 8 – 10.

  3. Objective • How binary streams are physically generated and transmitted with modulation. • Transmission concept including attenuation, bandwidth, channel capacity, and multiplexing • Properties of various transmission media. • Sources of transmission errors. Error detection and correction techniques.

  4. Transmission and Electron • Metallic conductor material has loose electron • Copper is a metallic conductors.

  5. Ohm’s Law • When a voltage/potential difference from an electrical source, such as a battery, is introduced between the two ends of a conductor, the electrons are stimulated to move within the metal from one atom to another • The relationship between voltage (V), current (I), and resistance (R) is defined by Ohm’s Law: V = IR

  6. Transmission over conductors Analog Binary

  7. Transmission rate of M-ary signaling • Transmission rate of a m-ary signaling D: data rate, R: signals per sec. Calculate the data rate for a communication system using 8-ary signaling at rate of 1000 signals per second.

  8. Transmission over air/vacuum • Electromagnetic (EM) energy • EM waves include radio waves, light waves (infrared, visible, ultraviolet), x-ray, gamma rays. Only radio waves and light wave used in communication • Modulation: varying wave properties to carry information.

  9. Transmission over air/vacuum • Electromagnetic (EM) energy • EM waves include radio waves, light waves (infrared, visible, ultraviolet), x-ray, gamma rays. Only radio waves and light wave used in communication.

  10. Radio Spectrum

  11. EM Wave Characteristics • EM wave is sinusoidal wave • Described by frequency, wavelength (in meters). • λ=c/f where λ is wavelength, c speed of light, and f is frequency.

  12. Wavelength of a wave Calculate the wavelength of a radio wave with 2.5 GHz frequency travelling thru a vacuum.

  13. Modulation • Modulation: carry information through changing the properties of a wave. • Amplitude, phase, frequency. • Demodulation: extract information from a modulated wave.

  14. Amplitude Modulation

  15. Frequency Modulation

  16. Phase Modulation • Same frequency as carrier wave. • Shift in phase from carrier wave. • May appear similar to frequency modulation but is not interchangeable; use phase demodulator to interpret a frequency modulated signal creates data error.

  17. Amplitude Shift Keying

  18. Frequency Shift Keying

  19. Phase Shift Keying

  20. Exam 1 • Held next Wednesday 9/28/2011 in class. • Material in Chapters 1 – 5. • No calculator nor computer. Closed books and notes. • True/False, Multiple Choice, Computation problems. • A problem can involve material from multiple chapters. • http://www.cs.ucf.edu/~aho/cis3003/Exam1Review.ppt

  21. Multiplexing • Single line transmits multiple information carrying signals. Single copper carries 24 separate voice streams. • TDM, FDM, Statistical multiplexing, wavelength division multiplexing. • MUX and DEMUX

  22. Time Division Multiplexing

  23. Attenuation • Signals weaken as it travels through medium. • Repeaters amplify signal.

  24. Cables

  25. Error in Data Transmission • Error can be caused by attenuation, interference, thermal noise, etc. • Erroneous data can either be resent by the sender or corrected by the receiver.

  26. Parity bit • Parity bit is added to data for error detection. • Even parity: number of 1’s in the data and parity bit is an even number. • Odd parity: number of 1’s in the data and parity bit is an odd number. Data: 1000111 Even parity: 10001110 ---- there are 4 1’s Odd parity: 10001111 --- there are 5 1’s

  27. Single Parity Checking Odd parity check: Transmitted Received 10001111 10000111 There are 5 1’s There are 4 1’s; error Receiver detects error but cannot tell where is the error; the data needs to be resent.

  28. Limitation in Single Parity Checking Odd parity check: Transmitted Received 10001111 11000111 There are 5 1’s There are 5 1’s; Receiver does not detect the error and assume the data is received correctly.

  29. Rectangular Coding • Given two 7-bit data: 1100000 1000101 • Represent the data in a block form • Add parity bit to each data or row of the block • Add a parity bit to each column • Transmitted: 11000000 10001011 01001011

  30. Correction w/ Rectangular Coding Transmitted with even parity coding Received: Receiver can locate and correct error.

  31. Data Transmission with Light

  32. Data Transmission with Light • Visible light over fiber optical cable used for computer network communication. • Infrared used by TV remote controls to communicated with TV.

  33. Fiber Optic Cable Refractive index: Speed of light thru vacuum Speed of light thru a medium

  34. Critical Angle • Light travels inside Medium 1 • Light hits at an angle greater than critical angle reflects. • Total internal reflection. • Critical angle depends on the refractive indices of both mediums. • Medium 1 has a higher RI than Medium 2 to keep light trapped in Medium 1

  35. Reflection • Allow fiber optic cable to be bent to a certain degree and routed along structure as needed.

  36. Types of Fiber Optic Cables Single mode • single frequency light such as laser. • Core: 8 –10 µm. Cladding: 125 µm. • 14 Tbit/s in a single 160 km (100 miles) line • Transcontinental network. • Uses laser as light source. Multimode • Core: 50-100’s µm. • 10 Mbit/s to 10 Gbit/s over link lengths of up to 600 meters • Used as backbone network in building • Uses low cost LED as light source.

  37. Fiber-optic Communication • Light emitting diodes (LED)/laser as transducer. • Lowest attenuation at 1.3 and 1.55 µm. • Coupler connects light source and detector with fiber cable. • Repeaters strength signal.

  38. Wavelength Division Multiplexing (WDM) • Two or more light source, each emits a different wavelength. • 10 (coarse) or 100 (dense) channels in one fiber. Mostly used with single mode cable.

  39. Compare Optic to Copper • Higher transmission rate. • Lower attenuation • Immune to. electromagnetic interference. • Harder to eavesdrop. • Harder to splicing (joining two cables). • Light weight. • Low power consumption. • Harder to install – fiber optic is delicate and can be damaged by pulling and twisting.

  40. Applications of Fiber Optics • Internet backbone; Transcontinental connections. http://image.guardian.co.uk/sys-images/Technology/Pix/pictures/2008/02/01/SeaCableHi.jpg • Research on replace wire with fiber optic on chips to overcome noise and attenuation. • Fiber to connect ISP network to consumers. • Fiber optic provides lights and transmit information in endoscope.

  41. Wireless Data Transmission

  42. Summary

More Related