1 / 1

Splitter T/RH Probe Configuration

The new configuration is shown below. Water can collect in a long drain tube that needs to be inspected regularly and emptied and the T/RH probe enters the air stream from above, thereby lessening the chance that water drops will collect on the sensors. Splitter T/RH Probe Configuration.

sammy
Download Presentation

Splitter T/RH Probe Configuration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The new configuration is shown below. Water can collect in a long drain tube that needs to be inspected regularly and emptied and the T/RH probe enters the air stream from above, thereby lessening the chance that water drops will collect on the sensors. Splitter T/RH Probe Configuration T/RH probe T/RH probe to blower to blower The old configuration of the stack T/RH probe is shown above. At coastal sites, water can occasionally enter the splitter during heavy rain/wind events and the wet salty environment can short out the probe electronics. Close up view of the new splitter probe configuration is shown above. drain tube

More Related