640 likes | 653 Views
Chapter – 2. Logic Families. Classification of Logic Families. Bipolar logic families. Bipolar logic families. Unipolar logic families. Characteristics of Digital ICs. Fan out Fan in Propagation delay Power dissipation Noise margin / noise immunity Figure of merit
E N D
Chapter – 2 Logic Families
Characteristics of Digital ICs • Fan out • Fan in • Propagation delay • Power dissipation • Noise margin / noise immunity • Figure of merit • Current and voltage • Power supply requiems • Operating temperature range • Flexibility available.
Characteristics of Digital ICs • Fan out- is defined as the maximum no. of logic gates which can be driven by a gate • Higher the fan out higher the current supplying capacity of a gate. • Fan in – the no of inputs gate. • for example a two i/p gate will have fan in equal to 2.
Propagation delay • The delay time are measured between 50% voltage level of i/p & o/p waveform. • There are two delay time- tPHL & tPLH • tPHL – when o/p goes from high state to low state. • tPLH- when o/p goes from low state to high state.
Noise margin / noise immunity • Noise margin -Noise is an unwanted electrical disturbance which may induce some voltage in the connecting wires used between two gates. • Noise immunity -The circuit ability to tolerate noise signal is referred as the noise immunity.
Current and voltage para. • VIH = High level input voltage. • VIL = Low level input voltage. • VOL= Low level output voltage. • VOH= High level output voltage. • IIL = Low level input current. • IIH = High level input current.
Power supply requiems- • The amount of power required by IC is important to choose proper power supply. • Operating temperature range- • Industrial application is 0oC to 70oC • Military application is -55oC to 125oC
Important logic families are • TTL- • It is a transistor transistor logic. • This is most popular logic family as lot of functions are available in the family • The important series are 74xx & 54xx • It works with power supply of +5v.
Totem-pole arrangement • The arrangement of Q3 & Q4 on the o/p side of a TTL NAND gate is called as the totem -pole arrangement
Advantages • Low propagation delay • High power dissipation • High current sourcing and sinking capabilties.
Positive logic- logic 0 = 0v logic1 = +5v • Negative logic - logic 0 = +5v logic1 = 0v