How to setup hp officejet 5252 printer | 123.hp.com/oj5252

1. How to setup hp officejet 5252 printer Set up your newly bought HP Officejet 5252 printer by taking it out of the shipment box. Remove all the packing materials, connect the power cable, install the genuine ink cartridges, and then load papers in the main input tray. Brief steps to set up your HP Officejet 5252 printer 1.Unpack your 123.hp.com/oj5252 printer from the box. 2.Remove the packing materials from the printer. 3.Open the ink cartridge and clear the packaging from there. 4.Plug the printer to a power source. 5.Open the ink cartridges from their wrapping. 6.Do not touch the ink nozzles on it. 7.Install the cartridges in their respective slots and close the door. 8.Load plain white papers in the input tray. 9.Align the ink cartridges to obtain amazing print quality. 10.Install the printer software to get started. Elaborate steps to set up the HP Officejet 5252 printer Take the HP printer out of the box and remove the packing materials from it.

2. Remove the packaging from the outside of your printer and open the exterior door. Clear the tapes and packing materials under the ink cartridge access door. Fasten the cartridge access door and the exterior door. Attach an end of the power wire to the rear of the printer and another end into an electrical socket. Switch on the printer by tapping the Power button. Record your preferences like language, date, country/region, etc., on the control panel. Install the ink cartridges into the printer. Handle the cartridge cautiously by touching only the black plastic on it. Adjust the cartridge at a slight upward angle into the empty slot and lightly push up on the cartridge until it fixes into its space. Fix the tri- color cartridge into the left slot and the black cartridge into the right slot. Secure the cartridge access door and then the exterior door. Load paper into the input tray by lifting it. Shift the paper width guide to the left. Keep blank white paper into the input tray and move the stack of paper down until it halts. Position the paper width guide to the right until it stops at the rim of the paper. Don’t push the paper width guide very far because it will bind the paper. Pull out the output tray and upraise the tray extender.

3. Get a print of an alignment page and lift the scanner cover. Put the alignment page with the printed side down on the scanner glass and modify according to the engraved guides. Press OK to scan the page and finish the cartridge alignment. The hardware setup is done, and you can install the printer software from the manufacturer’s website.