Noticeable Facts Associated with Panel Boards

1. Noticeable Facts Associated with Panel Boards Panelboards, available in a large variety of forms, are considered to be the best décor solution to serve the purpose of remodeling in an easier and faster manner. These boards are usually available in the size range of 4×8 feet, made using the best quality plywood in India or particle wood having a stunning finish layer on the top. The success of a panelboard job lies in its selection as per the exact measurement and then in thoughtful installation. Here are some facts you should take into notice: •No need for any paint, primer sanding or taping One of the most remarkable facts associated with panel boards is that they do not need any paint, primer sanding or taping. They are manufactured specifically for outdoor use as siding, as well as for the areas like bathrooms and kitchens. Panelboards are ideal for conditions in living rooms, bedrooms and any place inside a structure where moisture dominates the arena. Also known as paneling décor procedure, these boards are made in different patterns as well as quality parameters. •Can be installed with both new and existing walls Panelboards can easily be installed not only with new construction but also over existing walls. The advantage of paneling with new construction is that they act as a solid sheetrock as a robust backing agent. Any new construction (wall), when covered with panel board, does not need any paint, primer sanding or taping. •No scope for hiding a mistake in measurement, cutting and installing As these panels come fully pre-finished, the installer will find no scope for hiding any mistake if made during measuring, cutting or installing. Therefore, it is of immense significance to take perfect measurement of panels with even double or triple checks. It would not be hyperbolic to state that the success of any panel job lies in cutting it to the exact required size. •Double-check each board for any damage or defect

2. Before you move on to the buying phase, you must be very particular about the reliability of the supplier dealing in the panelboards while making sure that the panels are made using plywood sourced from the best plywood companies in India. Double-check each board for any damage or defect. Some commonly visible damages are associated with their edges and warping. Some suppliers deal in seconds and buying them can save you a lot of money, but you will be doing a lot to cope with the defects. Panelboards can be made using both plywood and particleboard. But you as a buyer should go for plywood-made panel boards. Investing in panel boards made from plywood brings you complete peace of mind for life as plywood is superior to particle board on each parameter.