90 likes | 203 Views
Project Wisdom Stone Networking using MiWi. Done By: Ahmad Abu rumi & Majdee Zoabi Supervisor: Boaz Mizrachi Project ID: D13111. The purpose of project. Building a network based on a MiWi P2P protocol (on the PC) that controls the receipt data stored in the wisdom stone.
E N D
Project Wisdom StoneNetworking using MiWi Done By: Ahmad Abu rumi & MajdeeZoabi Supervisor: Boaz Mizrachi Project ID: D13111
The purpose of project Building a network based on a MiWiP2P protocol (on the PC) that controls the receipt data stored in the wisdom stone. In addition , building a basic GUI system to allow easy use. Network must support:1) Send a message to the wisdom stone to start the data transmission. 2) Receive data from the wisdom stone and save it on the PC.
Block Diagram Communication based on 2.4GHz : PC GUI Zena USB Driver USB
Block Diagram Communication based on 433MHz : PC GUI Evaluation Board – Explorer 16 PICtail Networking MRF49XA SPI USB USB Driver
Stages of receiving the data The other side send a message that he finished sending The other side begins to transmit the data PC starts to receive and save the data transmitted PC send a message to start connection PC end the connection
Stages of work including schedule 1) running the Zena on PC to understand how it works, and learn to communicate between the computer itself . (four weeks)2) running two Zenasondifferent computers and communicate with each other.(two weeks) 3) Running the protocol on 433MHz ( two weeks ) . 4) communicate with the group which is responsible for transmitting data to us (Yossi & Amnon).(two weeks ) 5) Build GUI ( 1 week )
The tools that we will use : Zena Wireless Adapter 2.4 GHZ