1 / 37

Development of a UHF Passive RFID System

Development of a UHF Passive RFID System. LSCM Technology Transfer Forum Science Park, Cyber Port Edward Kai-Ning Yung City University of Hong Kong 25 August, 2010. Budget. Innovation and Technology Fund, Hong Kong SAR Government April 2005 - March 2007 : $4,600,000

Download Presentation

Development of a UHF Passive RFID System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Development of a UHF Passive RFID System LSCM Technology Transfer Forum Science Park, Cyber Port Edward Kai-Ning Yung City University of Hong Kong 25 August, 2010

  2. Budget • Innovation and Technology Fund, Hong Kong SAR GovernmentApril 2005 - March 2007 : $4,600,000 • Industrial Sponsorship: $500,000 • City University of Hong Kong: $920,000

  3. Industrial Sponsors • Surface Mount Technology Company Limited, Hong Kong • GoldTel Electronics Company Limited,Shenzhen

  4. Aims • Strengthen Hong Kong as the center of logistics management in the region • Demonstrate that Hong Kong is also a world-class center of technological innovation • Resurrect Hong Kong as a premium center of engineering supports

  5. RFID Era RFID has been identified by the national government as an area of intensive development RFID has also been identified by the federal government of USA as an area of intensive development RFID is the technology driver in the coming decades, similar to telephone, computer, network, and mobile phone in the last century

  6. From Strength to Strength • Electronic article surveillance system for retail outlets: passive, 143.2kHz, 1-bit • Autotoll system, semi-active system, 2450MHz • Octopus system: passive, 13.56MHz • Container port & containers: active, 433MHz • Baggage handling system in the Hong Kong Airport: passive, 900MHz

  7. Hi-Tech in Hong Kong • Hong Kong is an ideal site for field-testing novel applications of new technologies, such as RFID • Although all technologies are imported, some of the home-grown RFID systems have been recognized as the pioneer and the world leader in their respective areas • Without a home-grown technology, it is very difficult to export our system and recover part of the cost of development

  8. Objectives • Tailor-make a new RFID system for libraries • Develop a RFID reader with unique features • Design the needed antennas and other critical components/devices • Devise value-added features for libraries

  9. Design from Scratch Develop a new RFID system from scratch with • in-house developed critical components • innovative modules with discrete components • some of the key circuits packaged in RFIC • system integration • implementation, and • in-situ field testing

  10. RFID Library • Books and multi-media disks are relatively homogeneous in nature and in size, it is easier to implement a RFID system, comparatively • These items are not very expensive, a few errors are tolerable • They are not very cheap; thus, the high cost of implementation is justified • New features developed for libraries could be applied in other areas of logistics management

  11. Edges in Competition Besides an import replacement, our design is • affordable, efficient, reliable, robust, user-friendly, and culturally independent • environmental friendly • physically and psychologically safe • downward and laterally compatible Most important of all, there are ample rooms left for modification; thus, it could easily be adopted in other applications

  12. UHF verses HF • UHF and HF technologies are equally mature • High-gain resonant UHF antenna is feasible • Unlike UHF ones, HF RFID tag could only be used for gaining access • With a longer range of coverage, UHF RFID makes detection, trace-and-track, real-time location/search, surveillance, eavesdropping, and other processes possible. Compared with a HF system, it is a role-reversal

  13. Active verses Passive Compared with an active one, the pros and cons ofa passive RFID system are: • its tags are smaller, lighter, and cheaper; they could be used indefinitely without change of battery • its reader is large and very expensive • its range of coverage is relatively short • its operation decrees a strong EM field and the feedback signal is vulnerable to noises; thus, it allows little room for modification

  14. UHF RFID Mandate With a unique ID number, UHF passive RFID is the natural extension of the popular bar-code system; it has been adopted by the EPC of the United States: • A passive tag is required in every pallet to be shipped to the States • The requirement is later extended to every carton • Eventually, a tag must be embedded in every item to be sold in retail stores

  15. Market Survey • The readers are very expensive • Most readers are very large, so are the antennas • The take-it-or-leave-it reader allows no room for alteration • Early tags could not meet the market demands; they are frequently upgraded • New reader must be bought for every upgrade

  16. Potential Health Hazard • Without license, the output power of a reader could be as high as 4W for a range of 8 meters • For detection, the reader must be turned on at all time; thus, operators working in a library are subject to prolonged exposure to a strong non-ionization radiation • With the proliferation of wireless gadgets, the public is annoyed by the sight of many antennas and psychological illnesses are resulted

  17. Observations • Some of the FCC requirements may have been over-specified for applications in Hong Kong, such as the capacity of 200 tags and the speed of 30 tags/sec • Most readers use one antenna for transmitting a high power for energizing the tags and for picking up the feedback signals. To separate the out-going and the in-coming signals of >60dB in rating, an expensive isolator is needed • As the waves scattered from the tags are very difficult to predict, the signal picked up by one antenna is not reliable

  18. Interferences • For convenience, most readers are put on-top of a desk or installed on the wall of an entrance; thus, it is vulnerable to intra-system and inter-system interferences • Interruption of services may arise from the fixed-wire connection in terms of surge currents and static charges

  19. Access Control

  20. Remedy • A reader is custom-designed to handle the less demanding capacity and the slower speed of detection • The paths of transmission and feedback are separated after the synchronization process • While one antenna is used for energizing the tags, multiple antennas are strategically installed around the tag-to-be-detected for picking up the scattered signals, collectively

  21. Multi-Antenna Reader

  22. Critical Components • Expensive components such as the high power voltage-controlled oscillator are custom-designed in an application-specific RFIC • An efficient low-noise amplifier and other front-end components are packaged in another RFIC for installation near the pick-up antenna • Instead of putting all circuits in one RFIC, discrete components are used strategically such that later modifications are made possible

  23. New Configuration • The antenna is installed upside down • In this orientation, interferences from mobile phones and other wireless gadgets are reduced • The antenna is camouflaged as a decorative lighting for relieving the operator’s anxiety • The reader is turned on by a motion detector

  24. Accordion Helical Antenna

  25. Interference Containment • High gain helical antenna with small side lobes is used to contain intra-system interference • Ferrite tiles are placed under the antenna to absorb the excessive electromagnetic waves • A middleware is included inside every reader for buffering the computer network in the library and our network of RFID readers

  26. Multi-Book Check Out System

  27. Handheld Reader • A handheld reader is used to read tags missed by the array of fixed antennas • Communication between the principle reader and a handheld reader is established via a blue-tooth link • As the handheld reader provides no power of excitation, the required battery pack could be significantly reduced, and the resultant device is light in weight

  28. Value-added Services • Multiple-book check out system • Multiple-book return • Book sorter • Self service library • Smart book shelf/book bin • Compact book storage system

  29. Run-run Shaw Library

  30. Book Sorter

  31. Self Service Library

  32. Book Bin

  33. Book Storage & Retrieval

  34. Principle of Operation

  35. Retrieval

  36. Putting Back

  37. Thank You Questions & Answers

More Related