5 Steps To Make Sure Your Septic System Is In Good Working Condition

1. 5 Steps To Make Sure Your Septic System Is In Good Working Condition

2. Septic System • When it comes to money saving tips, the septic system is usually compared to a vehicle maintenance because it only takes a bit of consistent effort to prolong the system's life instead of constructing a new one. • Experts recommend an annual period of septic system inspection to make sure that it is properly working and to identify when its tank should be pumped. If it is found to have moving parts, more frequent inspection may be required. • The regular pumping and inspection of septic system can help prevent failure and the high repair expenses. • For a thorough inspection of the septic's entire system, a professional contractor is the man who can do the job. He can check the condition of the baffles or tees, the cracked pipes, and other parts of the system. For some guidance, here are the key steps to maintain the good condition of your septic system.

3. For some guidance, here are the key steps to maintain the good condition of your septic system.

4. Looking for the System • Locating where the septic system is not an easy job, even for a professional especially if the access to the tank is buried. • One of the ways that work is by going to the basement to identify the sewer pipe's direction. Another way to locate the buried piping is through the use of an insulated probe inserted into the soil. Once its get detected, a map will be sketched by the system.

5. Removing the Cover of the Manhole and then Ports Inspection • If they are buried, some digging will be required. If possible, for easier future inspection, make an elevated access covers in the manhole and ports’ area.

6. Examining Connections • If you need to determine if the plumbing of your household is working well and going to the system, running water in the sinks, flushing the toilets, and running the washing machine through a cycle are the helpful ways to check.

7. Scum and Sludge Layers Assessment • A special tool is used to measure the scum and sludge layers which will be inserted in the inspection port. A visual observation is included for a proper inspection. The tank should be pumped if the depth of the sludge is equal to one-third or above the liquid depth.

8. Checking the Drainfield and the Tank • The condition of the walls of the septic tank and any signs of failure of the drainfield will be checked by the inspector, as well as the drop box, distribution box or pump, if present.

9. Check this Out! • Above is an overview of how septic maintenance works. If you want people in your household to develop a good maintenance habit, why not educate them about what is good and bad for septic systems and the benefit will be for everyone. • Brought to you by Septic and Sewer Solutions, Inc. For more info on septic tank pumping gainesville ga, check out: http://septicandsewersolutions.com