1 / 25

Challenges and progress with the development of a Lunar Laser Ranger for South Africa

Challenges and progress with the development of a Lunar Laser Ranger for South Africa. Ludwig Combrinck Roelf Botha ludwig@hartrao.ac.za Space Geodesy Programme Hartebeesthoek Radio Astronomy Observatory In collaboration with Observatoire de la C ô te d’Azur

shania
Download Presentation

Challenges and progress with the development of a Lunar Laser Ranger for South Africa

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Challenges and progress with the development of a Lunar Laser Ranger for South Africa Ludwig Combrinck Roelf Botha ludwig@hartrao.ac.za Space Geodesy Programme Hartebeesthoek Radio Astronomy Observatory In collaboration with Observatoire de la Côte d’Azur 18th International Workshop on Laser Ranging - Pursuing Ultimate Accuracy & Creating New Synergies - 11-15 November 2013    Fujiyoshida, Japan

  2. 2 VLBI antennas, VLBI2010 antenna construction starting 2014 Space Geodesy at HartRAOSLR, VLBI, GNSS, DORIS, Geophysical instruments….now LLR in developmentVLBI2010 2014-2016 MOBLAS-6, part of NASA SLR network, 100 mJ, 200 pico-second pulse, precision about 1.5 cm Cannot do Lunar Laser Ranging, system too weak and not designed for LLR Japan, November 2013

  3. No LLR currently in Southern Hemisphere;The SA LLR will be part of the GGOS networkand part of the NASA SLR network • A Southern Hemisphere LLR will strengthen the geometry of the LLR network and should improve the determination of the orientation of the Moon • A dual system S/LLR will provide added coverage of SLR data in an area very sparsely covered • Currently 4 active LLR systems, 2 in development Apache point Active LLR system In development LLR system The concept of an LLR for the southern Hemisphere was discussed at the13th International ILRS Workshop (October 2002) in Washington at an LLR breakaway meeting, where community support was given in principle. I had previously discussed the idea with Etienne Samain (OCA, France). Originally I had tried t o obtain use of a 30” telescope at Sutherland, South Africa, proposal at SAAO meeting 26 April 2003. Japan, November 2013

  4. Removed 30 Aug 2005 Ex-Observatoire de la Cote d’Azur 1-m SLR telescope 1-m SLR FTLRS LLR Japan, November 2013

  5. Overall design concept is software-centric Japan, November 2013

  6. Software design; shared memory concept Japan, November 2013

  7. Telescope housing • 2.5 minutes to open and move away • Can be dismantled and moved to final location • Large enough to allow maintenance access via crane • All metal construction • Steel reinforced massive concrete floor • Housing runs on tracks via electrical motors • 1 ton crane to remove gearbox and instruments Japan, November 2013

  8. ‘Temporary foundation’ • Telescope housed in run-off enclosure • Crane to assist in disassembly and refurbishment • Totally nuts and bolts construction to facilitate future removal to appropriate site • Stable and massive foundation for tests Japan, November 2013

  9. 50 cubic metres of concrete… Japan, November 2013

  10. Run-off enclosure on steel tracks Japan, November 2013

  11. Japan, November 2013

  12. Tie to ITRF via GNSSMount installed 2 June 2011Much restoration work ahead! Japan, November 2013

  13. Gearboxes were removed, disassembled, refurbished, modern oil Japan, November 2013

  14. Tube has been restored Japan, November 2013

  15. All panels and Az-El mount repainted with heat reflecting paint Japan, November 2013

  16. Japan, November 2013

  17. Laser system by Cybioms Corporation 100 mJ, 20 Hz, <80 ps; 1KHz, 0.5 mJa Japan, November 2013

  18. Dual servo control system, all software • in-house (or rather late-at-night) Testbed 12.5 cm f12.5 refractor (i.e. what my lunch times are spent on) • Micro-processor controlled functions

  19. Main and secondary to be re-aluminized and coated Japan, November 2013

  20. Control centre based on 12 m shipping container; clean air filters • Located next to MOBLAS-6 • Curved roof to provide shade Japan, November 2013

  21. Control centre designed for desert conditions • Insulation panels fitted externally and internally • Rubberised floor • Dedicated air conditioner in laser room • Positive air pressure to keep dust out Japan, November 2013

  22. UPS 20 KVA Japan, November 2013

  23. Control room Japan, November 2013

  24. Project completion 2015? 2016?Where will the system be located? Japan, November 2013

  25. Thank you! Acknowledgements Thanks to the LOC for a fantastic workshop! Projects such as these depend to a large extent on international collaboration. We specifically thank OCA (France), NASA (USA) and Cybioms Corporation (USA). Funding received from the National Research Foundation (NRF), South Africa, towards this project is appreciated. This work is based on research supported by NRF grant IFR2011041500034. Japan, November 2013

More Related