780 likes | 937 Views
Weekly Report. Speaker: 陳琮夫 Advisor: 梁肇文 老師 Date:20130130. Outline Statistics of the lens (ten times) histogram & stage problem. Unit:mm. Statistics of the lens (first ten times). Unit:mm. Statistics of the lens (last ten times). Unit:mm. Statistics of the lens (eight times).
E N D
Weekly Report Speaker:陳琮夫 Advisor:梁肇文 老師 Date:20130130
Outline • Statistics of the lens (ten times) • histogram & stage problem
Unit:mm • Statistics of the lens (first ten times)
Unit:mm • Statistics of the lens (last ten times)
Unit:mm • Statistics of the lens (eight times)
Weekly Report Speaker:陳琮夫 Advisor:梁肇文 老師 Date:20130206
Outline • Sample simulation (Code V) and statistic
Statistic Exposure :2^-8 s Exposure :2^-11s
Weekly Report Speaker:陳琮夫 Advisor:梁肇文 老師 Date:20130206
Outline • Sample simulation (Code V)
Code V Zernike coefficient Unit : wave (632.8nm)
Different between Sample and Reference coefficient • Difference^2 = (Sample coef. – reference coef.)^2 • %% Sum(Difference^2) -> mean -> std 2 2 Difference Sample coefficient (25 lenses ) Reference coefficient
Weekly Report Speaker:陳琮夫 Advisor:梁肇文 老師 Date:20130227
Outline • Difference between CodeV and Matlab
Weekly Report Speaker:陳琮夫 Advisor:梁肇文 老師 Date:20130306
Outline • Coefficient modify • Calibration
Coefficient modify Sample position from POLGRID command
Weekly Report Speaker:陳琮夫 Advisor:梁肇文 老師 Date:20130320
Lensarray Calibration Image of autocollimatorPS: This pic is error !!! We align the reflection image to the ghost image
Lensarray Calibration The convex surface of lensarray the beam normal insert to the lensarray
Advisor • 確認中間偏暗十字是否為 reference還是 ghost image • 確認正射下 nomal reflection error (未回答道問題)
Weekly Report Speaker:陳琮夫 Advisor:梁肇文 老師 Date:20130327
Outline • Calibration the lensarray and CCD protecting glassNext : use the least square fitting to calibrate
autocollimator CCD • Calibration the lensarray and CCD The beam from autocollimator normal reflect to the protect glass above the ccd sensor
autocollimator CCD • Calibration the lensarray and CCD lensarray The beam from autocollimator normal reflect to the lensarray in front of the ccd sensor . PS: Here we adjust the cross image to match the center of ccd
autocollimator CCD lensarray • Calibration the lensarray and CCD snap Without the pinhole With the 50um pinhole
light sensor • Calibration the lensarray and CCD lensarray glass PS: First, align the autocollimator and ccd glass. Secondly, place the lensarray. Lensarray is not parallel to the glass