1 / 33

Reinforcement for Plates

Reinforcement for Plates . Course CT4150 Lecture12 5 Jan. 2010. Normal forces in concrete plates. Only rebars in the x and y directions Equilibrium of a plate part. Equations Design Choose q such that n s x + n sy is minimal (lower bound theorem). Solution. Example 1.

shanon
Download Presentation

Reinforcement for Plates

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Reinforcement for Plates Course CT4150 Lecture12 5 Jan. 2010

  2. Normal forces in concrete plates • Only rebars in the x and y directions • Equilibrium of a plate part

  3. Equations • Design Choose q such that nsx+nsy is minimal (lower bound theorem)

  4. Solution

  5. Example 1 • Situation nxx=1200, nyy=-200, nxy=-400 kN/m fy = 500 N/mm², f’c= 30 N/mm² Thickness = 100 mm • Reinforcement nsx= 1200+400 = 1600 kN/m nsy= -200+400 = 200 • Concrete nc= -2x400 = -800 kN/m

  6. Asx=1600/500 = 3.20 mm = 3200 mm²/m 212–280 = 2p/4x12²x1000/280 = 3231 OK Asy=200/500 = 0.40 mm = 400 mm²/m 26–500 = 2p/4x6²x1000/500 = 452 OK sc= 800/100 = 8 N/mm² < f’c OK (safety factors omitted)

  7. Example 2 • Deep beam 4.7x7.5 m, 2 supports, opening 1.5x1.5 m, point load 3000 kN, fcd = 16.67 N/mm², fyd = 435 N/mm²

  8. Forces nxx, nyy, nxy (linear elastic analysis) • Principal stresses

  9. Reinforcement requirements (software)

  10. Reinforcement (engineer)

  11. Moments in concrete plates • Only rebars in the x and y directions • Equilibrium of a plate part • Result (Yield contour)

  12. Example 3 • Moments in a point mxx = 13, myy = -8, mxy = 5 kNm/m • Moment capacities mpx = 17, mpy = 0, m’px =0, m’py = 10 • Is the capacity sufficient? • Yes

  13. Design of moment reinforcement • Carry the moments with the least amount of reinforcement. • So, minimize mpx+ mpy+ m’px+ m’py • 5 constraints • mpx, mpy, m’px, m’py≥ 0 Solution 1 (Wood-Armer moments) • Crack direction 45º to the reinforcing bars

  14. Solution 2 (when mpx would be < 0) Solution 3 (when mpy would be < 0)

  15. Solution 4 (when m’px would be < 0) Solution 5 (when m’py would be < 0)

  16. Solution 6 (when mpx and mpy would be < 0) Solution 7 (when m’px and m’py would be < 0)

  17. Example 4 • Moments in a point (as in example 1) mxx = 13, myy = -8, mxy = 5 kNm/m • Moment capacities mpx = 13+5²/8 = 16.13 m’px = 0 mpy = 0 m’py = 8+5²/13 = 9.92 • Amount of reinforcement is proportional to 16.13+0+0+9.92 = 26 • Amount of reinforcement in example 3 17+0+0+10 = 27 (larger, so not optimal)

  18. Example 5 • Plate bridge, simply supported • 4 x 8 m, point load 80 kN, thick 0.25 m

  19. Example 5 continued • Decomposition of the load

  20. Example 5 Torsion moment

  21. Example 5 All moments • Moments in the bridge middle • Moments at the bridge support

  22. Example 5 FEM moments

  23. Example 5 Reinforcement Middle Support Designed

  24. Example 5 Upper bound check Result > 1 OK

  25. Computed requirements

  26. Conclusions The design procedure used is 1 Compute the force flow linear elastically 2 Choose the dimensions plastically The reason for the linear elastic analysis in the first step is that it shows us how an as yet imperfect design can be improved. A plastic (or nonlinear) analysis in step 1 would shows us how the structure would collapse; but that is not what we want to know in design. This procedure is applied to design many types of structure for the ULS.

More Related