1 / 8

Capstone Project: Drift Trike

Max Gundrum. Capstone Project: Drift Trike. Popular ideas. Video of Drift Trikes. Trike Video Drift Trikes - Student Documentary Film Motorized Drift Trike Battles . Basic Dimensions. Video on Trike design Basic design found on the internet:. TurboCAD Blueprint.

sharla
Download Presentation

Capstone Project: Drift Trike

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Max Gundrum Capstone Project: Drift Trike

  2. Popular ideas

  3. Video of Drift Trikes • Trike Video • Drift Trikes - Student Documentary Film • Motorized Drift Trike Battles

  4. Basic Dimensions • Video on Trike design • Basic design found on the internet:

  5. TurboCAD Blueprint

  6. Prep for Building Example of bike used Example after bike is cut down

  7. Buliding Of Trike • Tools needed

  8. Work Journal (Starts 4/30/2013) Work Journal (Starts 4/30/2013) • Day 1: Research of designs and ideas of drift trike • Day 2: Found designs and plans online • Day 3: Watched videos to see popular designs • Day 4: Looked for a bike to use for the project • Day 5: Looked for pricing of parts and materials needed • Day 6: Found basic dimensions and basic welding techniques • Day 7: Started on TurboCAD blueprint • Day 8: working on blueprint • Day 9: Finished blueprint • Day 10: Start prep for cutting bike frame/ getting tools needed • Day 11: Start Building (5/20/2013) • Day 12: started cutting bike frame • Day 13: Welder was not working properly • Day 14: Went and found approximate cost for all materials • Day 15:**FOUND THAT THE WELDER NEEDED REPAIR • *Plans once welder is fixed/replaced • 2-4 hours of fabricating and welding metal • 2-3 hours of fixing and flaws/ solving problems • 1-2 hours of final assembly • ~1 hour of final testing, make sure all adjustments are made • 1-2 hours of prep for paint and painting • FINISH PROJECT WITHIN 10 DAYS

More Related