1 / 26

The introduction of air intake optimized economizer

The introduction of air intake optimized economizer. The principle of fuel saving and improving the horsepower.

sheilar
Download Presentation

The introduction of air intake optimized economizer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The introduction of air intake optimized economizer

  2. The principle of fuel saving and improving the horsepower Bernoulli’s Principle, Venturi tube Principle, cut the direction of wind and form the eddy current. It results in multiple efficacy and bring enough 2-3 times oxygen into the engine bay and ignite completely, improve the thrust of the engine, release the water vapor, reduce the exhaust gas. The cylinder and piston of the engine will not heap the carbon, and achieve the effect of saving the fuel and improving the horsepower.

  3. Second Generation Trademark name of the second generation: Professor Save Patent name: air intake optimized gasket for automobile Patent of R.O.C: New design No. M 551227 Patent term: July 10, 2017 to July 09, 2027 China new design patent: 201720830588.2 Patent term: July 10, 2017 to July 09, 2027

  4. Four major functions of the patent gasket • Protect the environment and reduce the pollution: eliminate carbon monoxide and PM 2.5 2. Reduce the fuel consumption: 10～12% in urban area, 20～24% on the highway 3. Improve the horsepower: about 15～18 % 4. Cool down the engine: control the temperature at around 80 degrees Celsius ‧Guarantee the effectiveness, and no charge if it is ineffective ‧Easy to install, and produce the effect in ten minutes. ‧It is placed on the air filter element, and does not need to modify

  5. Time for installing and economic benefits Effective mileage: • 200 thousand kilometers, and for commercial vehicles which are often used could reach to 300 thousand kilometers 2. Reduce the efficiency of the fuel consumption: 10～12% in urban area, 20～24% on the expressway 3. Reduce the rate of the fuel consumption: 10～12% for new cars, 20～24% for old cars

  6. The necessary action before installation • Open the hood, launch engine of the car and runs it at idle speed for 3 minutes. 2. Check the number of rpm, and take a picture as record and evidence. 3. The car owner or driver and the installer go to the exhaust pipe located on the backside of the car, and witness whether the exhaust pipe dries the black heaping carbon or not. 4. Grab the air with hand and smell it for whether it releases the gas smell or not. 5. Let the back of a hand with the distance of 6 cm from exhaust pipe and feel whether there is moisture or not. 6. Stand in front of the car and hear the sound of the engine, then feel and record the condition of the sound.

  7. The Installation Procedure 1. After turning off the car, open the button of the bellows and take out the cylindrical filter element, then clear up with the hair dryer. 2. Stick the gasket with the big wavy aperture on the cylindrical filter element, and the small wavy aperture is faced to the engine bay. 3. 80% for the gasket coverage and 20% for the blank, this is the golden ratio for the best effect. Cut the suitable size with scissors. 4. It is the best effect that the gasket is placed under the gas collection hole! 5. Close the bellows at the end and buckle the safety button.

  8. Procedure one of the technical adjustment • If the gasket is placed on the filter element and the superficial measure is identical, then cut about 20% of the blank rate plum blossom hole in 3 or 4 places of the gasket. 2. The air intake bellows of the vehicle with large horsepower is bigger, and should install about 1.5~2 slices of gasket which is combined with 2 bands. 3. If the air box in the old type of the car could not be installed on the filter element, it could install with the band under the filter element by the expedient.

  9. Procedure two of the technical adjustment 4. The cylindrical air box: Cut with a round version of the gasket according to the size of diameter, the large wavy hole toward the filter core, and the small wavy hole is fixed to the air intake hole of the engine. 5. If the cylindrical air filter element is oversized, install the square gasket, and also the circular gasket should be placed to enhance the vortex flow, and result in the tornado form total for 2 times, then produce enough oxygen (oxygen content) to promote the effect of complete combustion.

  10. Operation one of stepping on the accelerator after installation • The old car with more than 3 years should be stepped on the accelerator for 10 times, the first to third time is stepped on for rpm 4,000, stepped for 30 seconds then stopped for 15 seconds, and stopped after 3 times in succession of this procedure, then go to the exhaust pipe and check whether the carbon monoxide is eliminated completely or not. The other 7 times just step on for 3,500 revolutions. 2. The car between 1 to 3 years should be stepped on the accelerator for 6 times, the first to third time is stepped on for rpm 4,000, stepped for 30 seconds then stopped for 15 seconds, and stopped after 3 times continued, then go to the exhaust pipe and check whether the carbon monoxide is eliminated completely or not. The other 3 times just step on for 3,500 revolutions.

  11. Operation two of stepping on the accelerator after installation 3. If the old car with 15 to 20 years is stepped on the accelerator and occurred detonation, the first time is stepped on for rpm 3,000 and rotated for 30 seconds. The second and third time is stepped on rpm 3,500 and rotated for 30 seconds. The fourth to tenth time is stepped on rpm 3,000 and rotated for 30 seconds. 4. Stepping on the accelerator to occurring detonation, the first time should stay at the point of rpm then and continue for 30 seconds. Step on for the second time could increase to the rpm point of re-detonation for 30 seconds. The third to tenth time of stepping on could maintain rpm 3,000 and rotate for 30 seconds.

  12. Check after installation (1) • The car owner or driver and the witness go to the backside of the car together, and check whether it releases the black smoke, carbon deposit, gas smell is released by the exhaust pipe or not when step on the accelerator. 2. Grab the air with the hand and smell to make sure there is no gas smell. 3. Let the back of a hand with the distance of 6 cm from exhaust pipe for 10 seconds and test whether the moist mist is exhausted or not. 4. Check whether the oil stain or water stain is exhausted on the ground under the exhaust pipe. 5. Check whether there is any water drop around the exhaust pipe.

  13. Check after installation (2) 6. The car owner or driver and the witness go to the driver’s cab and see the rpm decreased value when idle the speed, and take a photo as evidence. The computerized car could not decrease by locked, but it does not impact the fuel consumption. 7. After finishing all of the above actions, the car owner drives 10 minutes to test the sensation of increasing 15% of the horsepower and the light smooth accelerator. 8. When testing driving on the land bridge or slope, you can feel the horsepower is more powerful. 9. The sound of the engine is lower. 10. You can hear the sound of eddy current tornado entering the engine in the air-intake pipe when refueling.

  14. Effective phenomenon after installation (1) • (air intake optimized gasket) provide 2 to 3 multiple oxygen to increase the horsepower of the engine. 2. The effect of feeling the horsepower and torsion are improved as you drive into a climbing section. 3. Eliminate the situation of high mountain oxygen deficit and impotent caused by cars that drive on high-altitude in various countries around the world. 4. For those cars that cannot pass the car inspection of the carbon monoxide and hydrocarbon can pass it after installation. 5. The exhaust pipe will exhaust the carbon deposit or the water drop.

  15. Effective phenomenon after installation (2) 6. The tachometer could reduce 100-500rpm. But the computerized car could not decrease. 7. Use the back of the hand to test the exhaust, and perceive the humidity of the exhaust that becomes moist. 8. Reduction of toxic gases (HC hydrocarbons, NOx oxynitride) 9. Due to the complete combustion, there is no smell of carbon monoxide. 10. Perceive that the accelerator becomes loose, and the engine sound of the idling speed becomes quiet. 11. The engine has a nasal sound when step on the accelerator, and the power is strong when starting.

  16. Effective phenomenon after installation (3) 12. Perceive that it is powerful and easy when drive on the slope or land bridge. 13. The cruising ability of the idling speed could become 150 to 200 meter far from 40 meter. (The fuel saving and increase of the horsepower are proved) 14. After installation, the 70% of the carbon deposit is eliminated, and the remained 30% is eliminating. It will consume a little bit of oil to clear the operation in the beginning, and it will occur the phenomenon of fuel saving after filling 60 Liter of fuel and driving. 15. After the installation the new car saves 10~12% of the fuel. It is not conspicuous, but the engine does not heap the carbon from now on.

  17. Referral of the installation way (1)

  18. Referral of the installation way (2)

  19. Referral of the installation way (3)

  20. Referral of the installation way (4)

  21. Referral of the installation way (5)

  22. Referral of the installation way (6)

  23. Advantages of the product ＊ Patent of R.O.C. for 10 years, Patent of China for 10 yeas ＊ The only international patent of utilizing the air to save the fuel presently ＊ Increase 15% to 18% of the horsepower of the engine ＊ Protect the environment and reduce the pollution, and eliminate PM 2.5 ＊ Reduce 10~12% of the fuel consumption in urban area, and reduce 20~24% of the fuel consumption on the highway ＊ Control and maintain intake air cooling engine temperature below 40 degrees Celsius. ＊ Guarantee effectiveness, and no charge if it is ineffective.

  24. Characteristics of the product • No need to destroy the structure of the car body, no repairing problems. • It is easy to install, and could finish by yourself. • Effective term: 20+10 thousand kilometers. • After installation for 10 minutes, the effect is presented immediately.

  25. There are too many cars, and the best effect is on the old cars. The market is huge, and it could not be fulfilled. 2. Too many people do not know this good product, who they can look for and install the equipment!? 3. The people who have installed know that it works well, and they definitely introduce this product to their friends to install the equipment. Therefore, there are chances everywhere. 4. All of the cars with the power of internal combustion engine need to utilize this patent. The market size

  26. THE END Thank you! Welcome to install and utilize it, and promote the environmental protection and save the earth together!

More Related