180 likes | 204 Views
This overview provides insight into the regulatory expectations for conducting industrial radiography field inspections in Canada. Learn about the obligations of licensees and operators, required equipment, security measures, and more.
E N D
Conducting an Industrial Radiography Field Inspection – Canadian Overview nuclearsafety.gc.ca
Content • Introduction • Regulatory Expectations • Conclusion
Introduction • Focus on regulatory expectations when conducting a radiography field inspection. • Just a perception of what we look for in Canada
NSRD 30 – Obligations of Licensees • Appropriate and calibrated dosimetry • Calibrated radiation detection equipment • A safe and properly functioning device • Well maintained accessory equipment • Emergency Equipment • Signage and Barriers • Trained workers Please note – this is not a comprehensive list
NSRD 31 – Obligations of Operators • Properly worn dosimetry • Use of a calibrated Survey Meter • Immediate availability of emergency equipment • DRD Readings and Pre-Op Checks • Placement of signs, barriers and persons • Locking of device while not in operation Please note – this is not a comprehensive list
NSRD 31(6) – Emergency Situations • Source retrieval requires specialized training • Know your company’s response procedure • FOLLOW THIS PROCEDURE
Field Documents • Valid CNSC Licence • Transport Document • TDG Certificate • Radiation Safety Manual • Device Operating Procedures • Emergency Response Procedures • CEDO Cards – highly recommended, but may soon be required.
Required Equipment • Survey Meters – How many depends on what is in your company’s procedures • Dosimetry – TLD/OSLD, DRD, PAD • Emergency Equipment – Tunnel, Cutters, Tongs • Signage and Barriers – Condition and Placement
Security • Overnight storage, unattended vehicle or return to the shop? • What security is required for your situation? • Know how to properly arm and disarm your system • Know what features your system has – GPS, FOB, etc • System condition – Bad contacts and loose wires
CEDO Expectations (Knowledge) • Operator Obligations • Company Procedures • Signage and Area Control • Emergency Procedures • No-Go Gauge Checks • Teleflex Flex-test – we do expect to see this.
Operations – Survey Meter Use • NSRD 31(1)(h) -after each attempt to move the sealed source assembly to the shielded position inside the exposure device, use a radiation survey meter to determine that the sealed source assembly is in the shielded position • Question: Does my surveymethod meet the intent of this regulation?
Operations – The Device • Legible labels • Consignor ID • Source ID Tag • Field ID • Guide Tubes • Cranks • General Condition
Operations – Signs and Barriers • Signs – posted at 25uSv/hr (2.5mR/hr) • Barriers – erected at 100uSv/hr (10mR/hr) Questions: Can I see the entire radiography area? Can I control the area? It is the Operator’s responsibility to ensure the area is properly controlled
Operations - Transport • 4 Class-7 Placards • Transport Document within Driver’s Reach • Device securely stowed • PTNS 28(2) Exception: Certified device, one consignor only, 4 Class-7 placards • Words “Exclusive Use” can no longer be used.
Operation – Dose to the Public • NSRD 30(6) and NSRD 31(1)(i): 0.1 mSv per week and 0.5 mSv per year. • CNSC Inspectors may ask for documented evidence that you are in compliance with these regulations. • What may raise our concerns? - Unexpected dose rates - Near-by occupied buildings - Reports from the Public
Conclusion CNSC Expectations • Adherence to the Act and the Regulations • Adherence to your company’s policies and procedures • Safe and Responsible use of Nuclear Substances Field Inspections help the CNSC evaluate the adherence & effectiveness of a licensee's program.
Thank you Canadian Nuclear Safety Commission www.nuclearsafety.gc.ca Facebook.com/CanadianNuclearSafetyCommission Youtube.ca/cnscccsn Twitter.com@CNSC_CCSN