1 / 2

Measured Shear (AFM) Simulated Shear (CPFEM)

Heterogeneous deformation affects material performance Materials World Network: Thomas R. Bieler, Michigan State University, DMR 0710570. Measured Shear (AFM) Simulated Shear (CPFEM).

shiri
Download Presentation

Measured Shear (AFM) Simulated Shear (CPFEM)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Heterogeneous deformation affects material performanceMaterials World Network: Thomas R. Bieler, Michigan State University, DMR 0710570 Measured Shear (AFM) Simulated Shear (CPFEM) Predicting or designing material performance depends on how effectively a material model can predict heterogeneous deformation. To evaluate how well a crystal plasticity finite element (CPFE) model performs, the amount of shear on prism, basal, twinningandpyramidal <c+a>systems in different grains of commercial purity titanium was quantitatively measured using Atomic Force Microscopy and Orientation Imaging Microscopy, which we directly compare with our CPFE simulations. The magnitude of strain is correctly modeled in grains in the center of the patch but the spatial distribution of strain within grains is not accurate, due to a lack of information about grains beneath the surface, effect of slip planarity (non-local effects), and grain boundary properties.

  2. Correct Modeling of Heterogeneous Strain will Enable Prediction of Damage Nucleation SitesMaterials World Network: Thomas R. Bieler, Michigan State University, DMR 0710570 Intact Boundary Fractured Boundary [ GB damage at strain 1.5% T1 GB T1 T1 T1 T1 T1 GB T2 T1 Heterogeneous strain in titanium is accentuated at grain boundaries facilitating damage nucleation such as this microcrack observed after1.5% strain, where many mechanical twins (T1, T2) interacted with a grain boundary (GB). A scalar fracture initiation parameter (fip) evaluated in the grain boundary plane is related to the probability for grain boundary fracture. The fip evolves during deformation based upon shear on slip systems and stress tensor evolution from CPFE model based on experiment, with higher values in a boundary that fractured (D.E. Mason, Albion College, consultant) The PI organized an International Symposium (to be repeated in 2011) on Deformation and Transitions at grain boundaries, held at MS&T 2009, which brought together researchers (75 talks) from 12 countries on the leading edge of modeling and characterizing grain boundary phenomena, with a special issue in Metall. Mater. Trans. A with 16 papers.

More Related