1 / 8

Buy Best Plastic Processing Machines | Call Now at: 91-731-2971234

Shree Sai Extrusion Technik is a best Pipe extruder manufacturer service provider in Indore We offer our clients an outstanding range of extrusion machines<br>

shreesaiseo
Download Presentation

Buy Best Plastic Processing Machines | Call Now at: 91-731-2971234

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. What Is The Difference Between HDPE And PVC? www.saiextrusiontechnikgroup.com

  2. Shree Sai Extrusion Technik Pvt. Ltd. is the company that has grown for becoming the largest manufacturer of Plastic processing machine in India. Shree Sai Extrusion Technik is a best Extruder manufacturer in Indore. Shree Sai Extrusion Technik is the reputed company which involved in providing a top-quality plastic extruder that is made from the finest Quality raw materials and based on the most advanced technology. The range is technically complete and has no inheritable admiration for higher quality. www.saiextrusiontechnikgroup.com

  3. Introduction of HDPE (High Density Polyethylene) HDPE” stands for “high-density polyethylene” or PEHD, polyethylene high-density. HDPE is polyethylene thermoplastic which is made by using petroleum.It is known as HDPE plastic is a denser version of polyethylene typically used to make water and drain pipes because of its rigidness and crystalline structure. It is the most widely used of the three polyethylene resins, with a density ranging from 0.93 to 0.97g/cm3 or 970kg/m3. Despite only having a slightly higher density than low-density polyethylene (LDPE), HDPE has a greater tensile strength. This is due to the fact that it has a low degree of branching; meaning that linear molecules pack better together and the difference in strength exceeds that of the difference in density. www.saiextrusiontechnikgroup.com

  4. Introduction of PVC (Polyvinyl chloride) It is Poly Vinyl chloride monomers are initiators such as peroxides and azo compounds, or polymers formed by free radical polymerization under the action of light and heat. The homopolymer of vinyl chloride and the copolymer of vinyl chloride are collectively called vinyl chloride resin. PVC is a white powder with amorphous structure. Its branching degree is small, its relative density is about 1.4, its glass transition temperature is 77-90 C, and its decomposition begins at 170 C. It has poor stability to light and heat. When it is above 100 C or exposed to sunlight for a long time, it will decompose into hydrogen chloride, which will be further decomposed by autocatalysis, causing discoloration and rapid decline in physical and mechanical properties. www.saiextrusiontechnikgroup.com

  5. Difference Between HDPE and PVC • HDPE (High Density Polyethylene) • HDPE is made more durable as compared to PVC. • HDPE is becoming an increasingly popular choice for golf course irrigation systems. • HDPE has various uses. It is used for the distribution of natural gas, chemicals and petroleum • products. Other uses include water, sanitary and storm sewer systems. • HDPE is a non-linear viscoelastic material and it has time-dependent properties. It can withstand • relatively high temperatures (120 0C) for short time intervals, but it can’t withstand normal • autoclaving conditions. • Thermal conductivity of HDPE is around 0.45 – 0.52 Wm-1K-1. • HDPE has a large value for strength-to-density ratio, and its density ranges from 0.93 g cm-3 to 0.97g cm 3. www.saiextrusiontechnikgroup.com

  6. PVC (Polyvinyl chloride) • PVC is a durable polyethylene thermoplastic made from petroleum. • PVC pipes are widely used for irrigation. • PVC is very commonly used for sewers, irrigation, drains and other industrial applications. • Hardness and mechanical properties of PVC are relatively high, and mechanical properties increase as the • molecular weight increases, and it decreases with the temperature. When comparing RPVC and FPVC, • RPVC has good mechanical properties. • RPVC (1.3–1.45 g cm-3) is denser than FPVC (1.1–1.35 g cm-3). • RPVC (0.14–0.28 Wm-1K-1) has a wide range of the thermal conductivity and FPVC (0.14–0.17 Wm-1K1) • has a narrow range www.saiextrusiontechnikgroup.com

  7. To fulfill the varied demands of our clients, Shree Sai Extrusion technik Pvt. Ltd. have engaged in manufacturing and supplying plastic extrusion machine. Their highly qualified professionals employ advanced machines and latest technology while manufacturing these products. Shree Sai Extrusion Technik Pvt. Ltd is actively involved in manufacturing and exporting Plastic extruder. They are the best manufacturer of Extrusion machine in India and supplied with the best quality material which is incorporated by technically sound workers during the manufacturing process. Their products have earned much appreciation in the global market owing to their efficient performance. For additional information about our products you can visit our website here www.saiextrusiontechnikgroup.com www.saiextrusiontechnikgroup.com

  8. Contact Us Shree Sai Extrusion Technik is a best manufacturer of plastic extrusion plants. For more product details you can visit our site at - www.saiextrusiontechnikgroup.com Office: Plot No. 75-77, Sector D-2, Industrial Area, Sanwer Road Indore- 452015,(M.P) India Phone: +91 731-2971234 Mobile:+91 9827010234 ,+91 8889588852 E-Mail: shreesaiextrusiontechnik@gmail.com www.saiextrusiontechnikgroup.com

More Related