390 likes | 565 Views
Basic Stamp Controller. Presented by: Joe Dubiel Wiley Dickins Barbara Hazen EET 230 Design and Fab. The idea…. Well…maybe we can do it…. Do you know this man?. He is … Garrett Morgan Inventor of the traffic light. The first traffic light….
E N D
Basic Stamp Controller • Presented by: • Joe Dubiel • Wiley Dickins • Barbara Hazen • EET 230 • Design and Fab
Do you know this man? He is … Garrett Morgan Inventor of the traffic light
(Excerpt from November 20, 1923 Official Gazette of the United States Patent Office) U.S.1,475,024 Traffic Signal. Garrett A. Morgan, Cleveland, Ohio Filed February 27, 1922. Serial No. 539,403. 7 Claims (Classification: 116-63) Claim 6. In combination, a standard, a hollow member projecting upwardly therefrom, an indicator rigid with the upper end of said standard, semaphore arms pivoted to the indictor, mechanism controlled from the standard for actuating the arms to move them in a vertical plane and for revolving them with the indicator to a new position, means associated with the standard for indexing the indicator to the proper position, means associated with standard retaining the arms in a vertical position during a portion of the turning operation and for releasing the arms when moved to a new position, and a dash pot associated with said member for cushioning the shock incident to the fall of said arms.
Our modern day traffic light…originally located at the corner of Hayes Ave. & North St.,Endicott,NY
1 N-S green; E-W red; 2 N-S yellow; E-W red; 3 N-S red; E-W green; 4 N-S red; E-W yellow; TABLE II. A state transition table State Condition
The Parts List… • Xxxxxxxx xxxx xxx
Breadboard to PC Board • jumpers? 2-sided? 1-sided? • constraints & limitations • why a 2-sided board? • challenge • no jumpers • vias • less is good • 355/133 vs. 246/16 • 110 vias = 220 solder joints!
Pictorial put these parts and these wires on a PCB! How about those DIPs?
How simple arrange gates trace it out hope this helps!
It’s Rocket Science! Wiley scrubs the copper on the future circuit board…
Thanks from… Joe, Barb, and Wiley!!!! Hallelujah! It’s over…