1 / 53

Chapter Five

Chapter Five. Physical and Logical Topologies. Objectives. Describe the basic and hybrid LAN physical topologies, their uses, advantages, and disadvantages Describe a variety of enterprise-wide and WAN physical topologies, their uses, advantages, and disadvantages

sinjin
Download Presentation

Chapter Five

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter Five Physical and Logical Topologies

  2. Objectives • Describe the basic and hybrid LAN physical topologies, their uses, advantages, and disadvantages • Describe a variety of enterprise-wide and WAN physical topologies, their uses, advantages, and disadvantages • Compare the different types of switching used in data transmission • Understand the transmission methods, or logical topologies, underlying Ethernet, Token Ring, LocalTalk, and FDDI networks

  3. Simple Physical Topologies • Physical topology • Physical layout of a network • A Bus topology consists of a single cable—called a bus— connecting all nodes on a network without intervening connectivity devices Figure 5-1: Bus topology network

  4. Simple Physical Topologies Figure 5-2: A terminated bus network

  5. Simple Physical Topologies • Ring topology • Each node is connected to the two nearest nodes so the entire network forms a circle • One method for passing data on ring networks is token passing • Active topology • Each workstation transmits data Figure 5-3: A typical ring network

  6. Simple Physical Topologies • Star topology • Every node on the network is connected through a central device Figure 5-4: A typical star topology network

  7. Hybrid Physical Topologies • Hybrid topology • Complex combination of the simple physical topologies • Star-wired ring • Star-wired topologies use physical layout of a star in conjunction with token ring-passing data transmission method Figure 5-5: A star-wired ring topology network

  8. Hybrid Physical Topologies • Star-wired bus • In a star-wired bus topology, groups of workstations are star-connected to hubs and then networked via a single bus Figure 5-6: A star-wired bus network topology

  9. Hybrid Physical Topologies • Daisy-Chained • A Daisy chain is linked series of devices Figure 5-7: A daisy-chained star-wired bus topology

  10. Hybrid Physical Topologies • Hierarchical hybrid topology • Uses layers to separate devices by priority or function Figure 5-8: A hierarchical ring topology

  11. Enterprise-Wide Topologies • Enterprise • An entire organization • Backbone networks • Serial backbone • Distributed backbone • Collapsed backbone • Parallel backbone

  12. Enterprise-Wide Topologies • Serial backbone • Two or more hubs connected to each other by a single cable • Distributed backbone • Hubs connected to a series of central hubs or routers in a hierarchy Figure 5-9: A simple distributed backbone network

  13. Enterprise-Wide Topologies Figure 5-10: A distributed backbone connecting multiple LANs

  14. Enterprise-Wide Topologies • Collapsed backbone • Uses a router or switch as the single central connection point for multiple subnetworks Figure 5-11: A collapsed backbone network

  15. Enterprise-Wide Topologies • Parallel Backbone • Collapsed backbone arrangement that consists of more than one connection from central router or switch to each network segment Figure 5-12: A parallel backbone network

  16. Enterprise-Wide Topologies • Mesh networks • Routers are interconnected with other routers, with at least two pathways connecting each router Figure 5-13: An example of a mesh network

  17. Wide Area Network (WAN) Topologies • Peer-to-peer topology • WAN with single interconnection points for each location • Dedicated circuits • Continuous physical or logical connections between two access points that are leased from a communication provider Figure 5-14: A peer-to-peer WAN

  18. Wide Area Network (WAN) Topologies • Ring WAN topology • Each site is connected to two other sites so that entire WAN forms a ring pattern Figure 5-15: A ring-configured WAN

  19. Wide Area Network (WAN) Topologies • Star WAN topology • Single site acts as the central connection point for several other points Figure 5-16: A star-configured WAN

  20. Wide Area Network (WAN) Topologies • Mesh WAN topology • Many directly interconnected locations forming a complex mesh Figure 5-17: Full-mesh and partial-mesh WANs

  21. Wide Area Network (WAN) Topologies • Tiered WAN topology • Sites connected in star or ring formations are interconnected at different levels, with interconnection points organized into layers Figure 5-18: A tiered WAN topology

  22. Logical Topologies • Refers to the way in which data are transmitted between nodes • Describes the way: • Data are packaged in frames • Electrical pulses are sent over network’s physical media • Logical topology may also be called network transport system

  23. Switching • Component of network’s logical topology that determines how connections are created between nodes • Circuit switching • Connection is established between two network nodes before they begin transmitting data • Message switching • Establishes connection between two devices, transfers information to second device, and then breaks connection • Packet switching • Breaks data into packets before they are transmitted

  24. Ethernet • Carrier Sense Multiple Access with Collision Detection (CSMA/CD) • The access method used in Ethernet • Collision • In Ethernet networks, the interference of one network node’s data transmission with another network node’s data transmission • Jamming • Part of CSMA/CD in which, upon detection of collision, station issues special 32-bit sequence to indicate to all nodes on Ethernet segment that its previously transmitted frame has suffered a collision and should be considered faulty

  25. Ethernet Figure 5-19: CSMA/CD process

  26. Ethernet • On an Ethernet network, an individual network segment is known as a collision domain • Portion of network in which collisions will occur if two nodes transmit data at same time • Data propagation delay • Length of time data take to travel from one point on the segment to another point

  27. Ethernet • Demand priority • Method for data transmission used by 100BaseVG Ethernet networks • Demand priority requires an intelligent hub Figure 5-20: CSMA/CD versus demand priority

  28. Ethernet • Traditional Ethernet LANs, called shared Ethernet, supply fixed amount of bandwidth that must be shared by all devices on a segment • Switch • Device that can separate network segments into smaller segments, with each segment being independent of the others and supporting its own traffic • Switched Ethernet • Newer Ethernet model that enables multiple nodes to simultaneously transmit and receive data over logical network segments

  29. Ethernet Figure 5-21: A switched Ethernet network

  30. Ethernet • Gigabit Ethernet • 1 Gigabit Ethernet • Ethernet standard for networks that achieve 1-Gbps maximum throughput • 10 Gigabit Ethernet • Standard currently being defined by IEEE 802.3ae committee • Will allow 10-Gbps throughput • Will include full-duplexing and multimode fiber requirements

  31. Ethernet • Padding • Bytes added to data portion of an Ethernet frame to make sure this field is at least 46 bytes in size • Ethernet frame types: • IEEE 802.3 (“Ethernet 802.2” or “LLC”) • Novell proprietary 802.3 frame (or “Ethernet 802.3”) • Ethernet II frame • IEEE 802.3 SNAP frame

  32. IEEE 802.3 (“Ethernet 802.2” or “LLC”) • Default frame type for versions 4.x and higher of Novell NetWare network operating system • Sometimes called LLC frame • In Novell’s lexicon, this frame is called Ethernet 802.2 frame Figure 5-22: An IEEE 802.3 frame

  33. IEEE 802.3 (“Ethernet 802.2” or “LLC”) • Service Access Point (SAP) • Identifies node or internal process that uses LLC protocol • Frame Check Sequence (FCS) • This field ensures that data are received just as they were sent • Cyclical Redundancy Check (CRC) • Algorithm used by FCS field in Ethernet frames

  34. Novell Proprietary 802.3 (or “Ethernet 802.3”) • Original NetWare frame type • Also called: • 802.3 Raw • Ethernet 802.3 frame Figure 5-23: A Novell proprietary 802.3 frame

  35. Ethernet II • Original Ethernet frame type developed by DEC, Intel and Xerox, before IEEE began to standardize Ethernet Figure 5-24: An Ethernet II frame

  36. IEEE 802.3 SNAP • Adaptation of IEEE 802.3 and Ethernet II • SNAP stands for Sub-Network Access Protocol Figure 5-25: An IEEE 802.3 SNAP frame

  37. Understanding Frame Types • Learning about networks is analogous to learning a foreign language, with the frame type being the language’s syntax • Just as you may know the Japanese word for go but how to use it in a sentence, you may know all about the IPX/SPX protocol but not how devices handle it • Autosense • Feature of modern NICs that enables a NIC to automatically sense what types of frames are running on a network and set itself to that specification

  38. Design Considerations for Ethernet Networks • Cabling • Connectivity devices • Number of stations • Speed • Scalability • Topology

  39. LocalTalk • Logical topology designed by Apple Computer, Inc. • Uses a transmission method called Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) • A teleconnector is a transceiver used on a LocalTalk network • Macintosh version of TCP/IP is called MacTCP

  40. Token Ring • Token Ring networks use the token passing routine and a star-ring hybrid physical topology • The 100-Mbps Token Ring standard is known as High-Speed Token Ring (HSTR) • On a Token Ring network, one workstation, called the active monitor, acts as the controller for token passing

  41. Token Ring • Multistation Access Unit (MAU) • Regenerates signals Figure 5-26: Interconnected Token Ring MAUs

  42. Token Ring • Control Access Unit (CAU) • Connectivity device used on a Token Ring network • Lobe Attachment Module (LAM) • Device that attaches to a CAU to expand the capacity of that device

  43. Token Ring • Token Ring networks with STP cabling may use a type 1 IBM connector • A DB-9 connector is another type of connector found on STP Token Ring networks Figure 5-27: Type 1 IBM and DB-9 Token Ring connectors

  44. Token Ring • Media filter • Device that enables two types of cables or connectors to be linked • Token Ring media filter • Enables DB-9 cable and type 1 IBM cable to be connected Figure 5-28: A Token Ring media filter

  45. Token Ring • Token Ring switching • Like Ethernet networks, Token Ring networks can take advantage of switching to better utilize limited bandwidth • Token Ring frames • IEEE 802.5 Token Ring frame • IBM Token Ring frame Figure 5-29: An IBM Token Ring frame

  46. Design Considerations for Token Ring Networks • Cabling • Connectivity devices • Number of stations • Speed • Scalability • Topology

  47. Fiber Distributed Data Interface (FDDI) • Logical topology whose standard was originally specified by ANSI in mid-1980s and later refined by ISO Figure 5-30: A FDDI network

  48. Asynchronous Transfer Mode (ATM) • Logical topology that relies on a fixed packet size to achieve data transfer rates up to 9953 Mbps • The fixed packet in ATM is called a cell • A unique aspect of ATM technology is that it relies on virtual circuits

  49. Asynchronous Transfer Mode (ATM) • ATM uses circuit switching, which allows ATM to guarantee a specific quality of service (QOS) • ATM technology can be integrated with Ethernet or Token Ring networks through the use of LAN Emulation (LANE)

  50. Chapter Summary • A physical topology is the basic layout of a network • Physical topologies are categorized into three fundamental geometric shapes: bus, ring, and star • Few LANs use the simple physical topologies in their pure form • Hubs that service star-wired bus or star-wired ring topologies can be daisy-chained to form a more complex hybrid topology • Hierarchical hybrid topology can designate hubs at different layers to perform different functions

More Related