1 / 21

DE2-115 Control Panel - Part I

DE2-115 Control Panel - Part I. 數位電路實驗 TA: 吳柏辰. Author: Trumen. Outline. Introduction to DE2-115 Control Panel Control Panel Setup Controlling the LEDs, 7-segment Displays, and LCD Display Switches and Push-buttons. Introduction to DE2-115 Control Panel. Introduction to Control Panel.

siran
Download Presentation

DE2-115 Control Panel - Part I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DE2-115 Control Panel - Part I 數位電路實驗 TA: 吳柏辰 Author: Trumen

  2. Outline • Introduction to DE2-115 Control Panel • Control Panel Setup • Controlling the LEDs, 7-segment Displays, and LCD Display • Switches and Push-buttons

  3. Introduction to DE2-115 Control Panel

  4. Introduction to Control Panel • The DE2-115 board comes with a Control Panel facility that allows users to access various components on the board from a host computer. • The host computer communicates with the board through a USB connection. • The facility can be used to verify the functionality of components on the board or be used as a debug tool while developing RTL code.

  5. Control Panel Setup

  6. Control Panel Setup • The Control Panel Software Utility is located in "/DE2_115_tools/DE2_115_control_panel/" in the DE2-115 System CD. • It's free of installation, just copy the whole folder to your host computer and launch the control panel by executing the "DE2_115_ControlPanel.exe".

  7. Activate the Control Panel (1/2) • Make sure Quartus II 10.0 or later version is installed successfully on your PC. • Set the RUN/PROG switch to the RUN position. • Connect the supplied USB cable to the USB Blaster port, connect the 12V power supply, and turn the power switch ON. • Start DE2_115_ControlPanel.exe on the host computer. The Control Panel user interface will appear.

  8. Activate the Control Panel (1/2)

  9. Activate the Control Panel (2/2) • The DE2_115_ControlPanel.sof bit stream is loaded automatically as soon as the DE2_115_control_panel.exe is launched. • In case the connection is disconnected, click on CONNECT where the .sof will be re-loaded onto the board. • Note, the Control Panel will occupy the USB port until you close that port; you cannot use Quartus II to download a configuration file into the FPGA until the USB port is closed.

  10. DE2-115 Control Panel Concept Active on the host computer Implemented in the FPGA board

  11. Controlling the LEDs, 7-segment Displays, and LCD Display

  12. Switches and Push-buttons

  13. Push-buttons • Each of these buttons is debounced using a Schmitt Trigger circuit. • Since the push-buttons are debounced, they are appropriate for using as reset inputs in a circuit.

  14. Debounce Logic Circuit • Level-sensitivev.s. edge-sensitive button input(bi) Level-sensitive Edge-sensitive bi==1 bi==0 bi==0 bi==0 0 1 2 3 button state (bs) bi==1 bi==0 bi==1 bi==1 bi==1 4 6 5 7 bi==0

  15. Switches • Switches are not debounced, and are assumed for use as level-sensitive data inputs to a circuit.

  16. The End. Any question?

  17. Reference • "DE2-115 User Manual" by Terasic Technologies Inc.

More Related