1 / 10

Development of infrared and radar technologies for identifying mixture segregation

Development of infrared and radar technologies for identifying mixture segregation. Rick Collins (TxDOT). . . Background to Thermal Segregation. Historically segregation thought of as mechanical (gradation) phenomenon 1996 – WSDOT discovered thermal imaging could detect segregation

solana
Download Presentation

Development of infrared and radar technologies for identifying mixture segregation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Development of infrared and radar technologies for identifying mixture segregation Rick Collins (TxDOT)

  2. . Background to Thermal Segregation • Historically segregation thought of as mechanical (gradation) phenomenon • 1996 – WSDOT discovered thermal imaging could detect segregation • Cold spots became low density areas • 89 percent of locations with t > 25 F failed density uniformity criteria Thermally segregated locations holding water (courtesy WSDOT)

  3. NCAT (2000) and TTI (2002) similarly found thermal uniformity suitable for detecting segregation • NCAT – low severity segregation when t > 18 F • TTI – when t > 25 F, TxDOT density uniformity requirements not met

  4. Implementing IR into Specifications • Existing methods using handheld IR devices already in place • Pave-IR system developed through research collects full-coverage testing without operator attendance

  5. Moba Corporation refined and now manufactures Pave-IR. This device is commercially available • Thermal profile and results available real time • Desktop software for viewing data files and generating pdf report Summary Results in Operacion Thermal Profile View in Operacion Reviewing Thermal Profile with Desktop Software

  6. Implementing IR into Specifications • In 2010 the use of Pave-IR is now included in TxDOT Special Provision 341-024 • Pave-IR automatically processes data and generates report • Currently 12 Pave-IR systems purchased by Contractors and in use in Texas

  7. Background to Ground Penetrating Radar • Sends pulses into pavement – non contact and high speed • Reflections obtained at interfaces of materials with different electrical (dielectric) properties • Traditionally used for thickness estimates and locating subsurface defects and section changes

  8. Using GPR for Evaluating HMA Construction • TxDOT has extensive experience using GPR and an active GPR program • In-house software for data processing • The amplitude of the Surface reflection is related to density of the HMA surface layer

  9. Plan Profile View of expected Air Void Distribution

  10. Using IR and GPR Together • IR serves well as QC with real-time monitoring • GPR serves as a QA check on completed projects GPR Collecting Data IR Bar Installed in a Paver

More Related