200 likes | 340 Views
EDIT MODE. The HAAS Control Series. SLIDE LEGEND. PRESS THREE TIMES TO GET TO THIS PAGE (Continued on next slide) Note:. ACTIONS. To advance through the presentation click on your left mouse button or press < ENTER >. To exit press < ESC >. KEYS. INSTRUCTIONS. INFORMATION.
E N D
EDIT MODE The HAAS ControlSeries
SLIDE LEGEND PRESS THREE TIMES TO GET TO THIS PAGE (Continued on next slide) Note: ACTIONS To advance through the presentation click on your left mouse button or press <ENTER>. To exit press <ESC>. KEYS INSTRUCTIONS INFORMATION OTHER INFORMATION
EDIT MODE This module is intended to provide you with a familiarization of the Edit Mode on the Haas Control
Edit Buttons EDIT: INSERT: ALTER: DELETE: UNDO: Pressing the edit button on the control will display the current program for editing. You can also use LIST PROGRAMS or MDI/DNC to select a program to edit.
Edit Button: PROGRAM (EDIT) O91002 N00000 F1 KEY TURNS MENU ON/OFF PROGRAM EDIT SEARCH MODIFY I/O ; (Mill Engraving HAAS Logo) ; T1 M06 (TOOL#1 – ENGRAVING TOOL) ; G90 G54 G00 X-0.7355 Y0.429 ; S5000 M03 ; G00 G43 H01 Z1. M08 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; Edit Button: With the program you want to edit selected, Press <EDIT> to go into Advanced Editor. Advanced Editor will be covered as a separate module. Press<PRGRM CONVRS>to go into the “Normal” Edit Mode. (Large Format Edit) HELP O91002 O91002
Insert Button: PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 G03 X0.2475 Y0.5508 R0.02 ; X0.2275 Insert Button: Used to move text in the input buffer into the program after the current cursor location. Can also move blocks of code from one location in a program to another. In Block Edit (Covered Later) you can select a block of code from one program and insert it into another program. G01
Insert Button: PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 G03 X0.2475 Y0.5508 R0.02 ; Insert Button: Used to move text in the input buffer into the program after the current cursor location. Can also move blocks of code from one location in a program to another. In Block Edit (Covered Later) you can select a block of code from one program and insert it into another program. G01
Alter Button: PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ; X0.7226 Alter Button: Used to change cursor-selected text to whatever is displayed in the input buffer. In Block Edit it can shift a block of code from one place in a program to another. G01
Alter Button: PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ; X0.7226 ; Alter Button: Used to change cursor-selected text to whatever is displayed in the input buffer. In Block Edit it can shift a block of code from one place in a program to another. G01
Alter Button: PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ; X0.7226 : Alter Button: Used to change cursor-selected text to whatever is displayed in the input buffer. In Block Edit it can shift a block of code from one place in a program to another. G01
Alter Button: PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7226 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ; Alter Button: Used to change cursor-selected text to whatever is displayed in the input buffer. In Block Edit it can shift a block of code from one place in a program to another. G01
Alter Button: PROGRAM (MDI ) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7226 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ; O12345 Alter Button: To save a program listed in MDI to the program list.Type the new program number Onnnnn; (one that is not already being used) into the input buffer then Press<ALTER> NOTE: The MDI screen will go blank , but the program is now in the program list under the number you entered. G01
Delete Button: PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 G03 X0.2475 Y0.5508 R0.02 ; Delete Button: Used to delete the item that the cursor is on. In Block Edit it can also be used to delete a block of code in a program. Can be used to delete entire message on the message screen. G01
Undo Button: PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7226 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ; Undo Button: Used to undo up to the last 10 edit changes. Will Not let you undo anything done inBlock Edit. In Block Edit you can perform operations on one or more lines in a program. Operations include: block duplication, block move & block delete. G01
PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; >G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 G03 X0.2475 Y0.5508 R0.02 ; In Advanced Editor Mode Press<F2> to define the beginning block of program lines, then scroll down and Press <F2> again to define the end of the block of lines to edit. In the 40 column editor Press<F1> to define the beginning of the block and Press<F2> to define the end of that block to edit. To get out of block edit, Press<UNDO> G01
PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; >G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 G03 X0.2475 Y0.5508 R0.02 ; In Advanced Editor Mode Press<F2> to define the beginning block of program lines, then scroll down and Press <F2> again to define the end of the block of lines to edit. In the 40 column editor Press<F1> to define the beginning of the block and Press<F2> to define the end of that block to edit. To get out of block edit, Press<UNDO> G01
PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 G03 X0.2475 Y0.5508 R0.02 ; In Advanced Editor Mode Press<F2> to define the beginning block of program lines, then scroll down and Press <F2> again to define the end of the block of lines to edit. In the 40 column editor Press<F1> to define the beginning of the block and Press<F2> to define the end of that block to edit. To get out of block edit, Press<UNDO> G01
Prepared by Haas AutomationTraining DepartmentOxnard, CA 93030