1 / 19

Chapter 4

Chapter 4. Control System. An arrangement of a sensor, controller, and controlled device to maintain a specific controlled variable value in a building space, pipe, or duct. Sensor.

sona
Download Presentation

Chapter 4

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 4

  2. Control System • An arrangement of a sensor, controller, and controlled device to maintain a specific controlled variable value in a building space, pipe, or duct.

  3. Sensor • A device that measures a controlled variable such as temperature, pressure, or humidity and sends a signal to a controller • Sensor output signal may be air pressure or resistance, voltage, or current in an electrical control system • Sensors may be mounted in a duct, pipe, or room remote from the controller

  4. Controller • Device that receives the signal from the sensor, compares it to a set-point value, and sends an appropriate output signal to a controlled device • Controller set-point is adjustable • Desired accuracy is also adjustable – accuracy also referred to as the proportional band or throttling range

  5. Controlled Devices • The object that regulates the flow of fluid in a system to provide the heating, air conditioning, or ventilation effect • Dampers – a set of metal blades that are used to regulate air flow • Valves – regulate the flow of a medium, in most cases a liquid medium *** Examples-water or steam flow • Gas valves and electric heat elements – deliver regulated heating

  6. Controlled Agents • Fluid that flows though controlled devices to produce a heating or cooling effect in a building space • Control Functions – must ensure the comfort of building occupants

  7. Temperature Control • One of the most important components of comfort • Is achieved by controlling either the building space temperature, return air temperature, or air volume

  8. Building Space Temperature Control • Room controller or thermostat is connected directly to a heating or cooling controlled device • Temperature can vary in large spaces • The room controller or thermostat may be mounted where it can be influenced • Can you think of some possible influences on space temperature?

  9. Return Air Temperature Control • The return air sensor is mounted in the common return duct at the AHU • Is more accurate because the temperature is an average of the entire controlled space • Prevent tampering of the room controller or thermostat • Disadvantage is that the maintenance or service person often will be the one to make adjustments to temperature.

  10. Air Volume Control • Changes the amount of air flow over the coil (heating or cooling) • Reduces air volume therefore reduces fan speed and energy consumption • Variable speed drive may be used to achieve the proper flow If DDC is being used what kind of point would be used to control a VFD? • Safety controls are used to ensure excessively high or low temperatures

  11. Humidity Control • Proper humidity ensures comfort • The humidity level most identified to achieve comfort is 50%. • Most common method is to include a humidity sensor or controller in the building space • Controller device opens or closes a humidification device

  12. Pressure Control • Used in specialized areas such as labs • Pressure sensor is normally mounted on a pipe or duct • The pressure sensor is connected to the controller which or opens or closes a controlled device such as a damper or valve

  13. Control System Characteristics • Set-point – the desired value to be maintained by a system • Temperature • Pressure • Humidity • Light level • Dew-point • Enthalpy

  14. Control System Characteristics • Control Point – the actual value that a control system experiences at any given time – the set-point may be different from the control point • Offset – the difference between a setpoint and control point • Feedback – the measurement of the results of a controller action by a sensor or switch – Example****Temperature from a sensor

  15. Closed Loop Control • Arrangement of a controller, sensor, and controlled device in a system • Feedback occurs between the controller, sensor, and controlled device • If one part of the control system malfunctions it causes other parts to have the wrong value or position

  16. Open Loop Control • No feedback occurs between the controller, sensor, and controlled device • Example – controller cycles a chilled water pump but there is no feedback from an outside air sensor

  17. ON/OFF Control • Either on or off control either 0% or 100% • Used in open and closed loop control • Air conditioning compressors, electrical heating stages, gas valves, refrigeration compressors, and constant speed fans

  18. Proportional Control • Analog • The controlled device is positioned in direct response to the amount of offset in the system • Use a response that is a number between two values such as 0-10 volts • Used in most commercial applications use proportional control • Can be inaccurate if not set-up properly

  19. Control Systems • The process of controlling an HVAC system involves three steps. • Measuring data • Processing the data with other information • Control action • These three functions make up what is known as a control loop

More Related