The importance of ventilation in a car production facility

1. The importance of ventilation in a car production facility Anyone who has been in a car production facility knows how clean it is these days. That was not always the case. Even a decade back, these industrial environments used to be the epitome of pollution. Car production facilities generate not only noise pollution but also a lot of particulate matters that pose a serious threat to human health. Some of these pollutants are as follows: ●Oil mist ●Dust generating from sand-blasting metal surfaces and ●Welding fumes that contain a plethora of hazardous containing pollutants like manganese, lead, hexavalent chromium, and other heavy metals. What does apex bodies have to say on this issue? Occupational hazard monitoring is mainly the job of globally recognized organizations like OSHA a.k.a Occupational Safety and Health Administration.According to them, all car production facilities should comply with the guidelines set by OSHA. According to the guidelines, a car production facility should do all that needs to be done to ensure that their workforce is working in a safe environment that cannot harm their health and reduce their life expectancy. Most cases of poor ambient air quality in car production plants are often traced to fumes and smoke arising from: ●Welding stations ●Sandblasting/metal finishing stations and ●Paint/primer stations. What can be done to improve air quality inside a car manufacturing plant? Well, the administrators of an automobile manufacturing plant can opt for localized industrial ventilation solutions like temperature resistanthose that can extract exhaust fumes from its point(s) of origin. Where to buy these? One can buy quality assured temperature-resistant hoses from the house of SOVPLYM. It is a Russian company that has been in the business of manufacturing and selling industrial ventilation solutions since 1989.

2. They offer three types of temperature resistant hose in their product range. It is time to take a closer look into each of them in the following sections: ●SP Hose 300 –It is flexible in nature and has the ability to extract exhaust fumes from points of origin that has a temperature of 300 degree Celsius. It is made using durable material that is highly resistant to chemical agents and deformities from heat. It is made available in different diameters. This is why one would need to consult with the experts at SOVPLYM before purchasing. ●SP Hose 200 –It is similar to the product mentioned above but has the capability to extract exhaust fumes of temperatures not exceeding 200 degrees Celsius, from the point of origin. It has a spiral clamp profile and has a wall of hot-dip galvanized steel and plastic for impressive operational life. It comes with neoprene-coated polyester fabric that ensures minimal wear and tear. ●SP Hose 150 –This can extract exhaust fumes not exceeding 150 degrees Celsius. It has a spiral plastic exterior and the outer layer is PP/EPDM-coated polyester fabric that helps in the reduction of operational wear and tear. A few words of advice It is best to have a detailed discussion with the experts associated with companies like SOVPLYM that offer industrial ventilation solutions before purchasing said equipment. The ventilation requirements for one automobile manufacturing plant will differ from the other. This is the reason why one should choose only those products that can suit their needs. If this step is not followed, a business will be looking at an exponential increase in overhead costs that could have been avoided! Contact Info: Address: Arrisa Avenue, Unit # 15, Office No. 303, 3rd Floor, Kolte Patil Downtown, Kharadi, Pune – 411014. Email Id: info@sovplym.in Phone No: 7875657764 Website:http://www.sovplym.in