1 / 76

GE Interlogix

GE Interlogix. Kalatel Division. Product Update. KTD-405 Programming & Standard Operations. KTD-405 Keypad Programming. KTD-405 keypad (Supervisor Programming). Boot-Up Screen. KEYPAD ADDRESS: 99 KEYPAD 99. KTD-405 keypad (Supervisor Programming). Default display after applying power.

speard
Download Presentation

GE Interlogix

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. GE Interlogix Kalatel Division Product Update KTD-405 Programming & Standard Operations

  2. KTD-405 Keypad Programming

  3. KTD-405 keypad (Supervisor Programming) Boot-Up Screen KEYPAD ADDRESS: 99 KEYPAD 99

  4. KTD-405 keypad (Supervisor Programming) Default display after applying power CAMERA --- MONITOR 1

  5. KTD-405 keypad (Programming) Navigating the menus

  6. KTD-405 keypad (Programming) Menus that were not available in the first releases of software are indicated by two beeps and the following display: NOT IMPLEMENTED

  7. Supervisor Programming

  8. KTD-405 keypad (Supervisor Programming) To Access Programming: • Press and hold the key • The unit will beep and show the following display • Remote device programming must be accessed separately. • Supervisor programming password is 1,4,7,6, • Also includes All user programming ENTER PROGRAMMING CODE:

  9. KTD-405 keypad (Supervisor Programming) Resetting the Factory Defaults • The first menu to display will be this one. • Press to advance to the next menu and to return to the previous menu at any time without changing any existing parameters RESET TO DEFAULTS? NO <+>=YES <->=NO NEXT

  10. KTD-405 keypad (Supervisor Programming) If you pressed “+” (yes): • The next display will show: • Followed by: • Followed by: • The keypad will advance to the next menu automatically 1=RESET ALL BUT TITLES 2=RESET ALL ARE YOU SURE? <+>=YES <->=NO NEXT INITIALIZING DEFAULTS PLEASE WAIT

  11. KTD-405 keypad (Supervisor Programming) Setting The Keypad Address • The address is a “user defined” two-digit number • The address must be from 10 to 99 • Each device on the RS-485 network must have a unique address • Address 99 is automatically assigned when the keypad is first connected and will remain unless changed by the user • Entering an address that is already used temporarily displays: • Select  or  to skip over this menu KEYPAD ADDRESS: 99 (01-99) NEXT ADDRESS NOT AVAILABLE

  12. KTD-405 keypad (Supervisor Programming) Backward Compatibility? • If the KTD-405 is being used in a system with: • Existing ProBridges • Existing CBR-KB3 or CBR-KB3/J keypads • Select YES to allow the KTD-405 to communicate properly with these devices. • Select  or  to skip over this menu KB3 PTZ PROTOCOL? NO <+>=YES <->=NO NEXT

  13. KTD-405 keypad (Supervisor Programming) Allow Remote Programming by user? • If the KTD-405 is being used in a system with: • Matrix Switchers or Multiplexers • Alarm Monitoring Equipment • Programmable Dome Cameras or Receivers • Select YES to allow the user to enter the 9,5,1, password and program these devices • Select  or  to skip over this menu ENABLE REMOTE PRGMG? YES <+>=YES <->=NO NEXT

  14. = , = , = , = , KTD-405 keypad (Supervisor Programming) Programming Keypad Titles • A keypad title can be up to 14 characters including: • A – Z and 0 - 9 • Keypads with titles can use the “Seize Control” option • Supervisors can seize camera sites, multiplexers, VCRs, etc. • Supervisors can seize an entire zone in the ZONE mode • Use the joystick or these buttons to program the title • Select  or  to skip over this menu KEYPAD TITLE: <> NEXT

  15. KTD-405 keypad (Supervisor Programming) Changing the SEIZE CONTROL code • Use the number keys to enter the new code • The keypad will advance to the next menu when the last digit is entered • Select  or  to skip over this menu SEIZE CONTROL CODE: 8642 USE NUMBER KEYS NEXT

  16. KTD-405 keypad (Supervisor Programming) Changing the SEIZE CONTROL time • Use the number keys to enter the new time • This is the number of minutes of inactivity before the keypad will exit the seize control mode • Select  or  to skip over this menu SEIZE CONTROL TIME: 5 (1-10) MINUTES NEXT

  17. KTD-405 keypad (Supervisor Programming) Restricting access to presets • Use the number keys to enter the new limit • This is the lowest preset number a user may change • Select  or  to skip over this menu LOWEST USER PRGMD PRESET (01-64) 58 NEXT

  18. KTD-405 keypad (Supervisor Programming) Programming the SOFT keys • This feature is not yet implemented • Select -,  or  to skip over this menu • Pressing + displays the following message: PROGRAM SOFT KEYS? <+>=YES <->=NO NEXT NOT IMPLEMENTED

  19. KTD-405 keypad (Supervisor Programming) Programming the ACCESS codes • This feature is not yet implemented • Select -,  or  to skip over this menu • Pressing + displays the following message: CHANGE ACCESS CODES? <+>=YES <->=NO NEXT NOT IMPLEMENTED

  20. User Programming

  21. KTD-405 keypad (User Programming) To Access User Programming: • Press and hold the key • The unit will beep and show the following display • User programming password is 5,7,9, ENTER PROGRAMMING CODE:

  22. = , =  KTD-405 keypad (User Programming) Changing the Operating Mode • Two choices are available: • Digiplex • Zone • Use the joystick or these buttons to select the mode • Select  or  to skip over this menu OPERATING MODE: DIGIPLEX <,>=SELECT NEXT

  23. KTD-405 keypad (User Programming) DigiPlex mode Menus Setting the system size • Enter the highest camera number in your system • Select  or  to skip over this menu SYSTEM SIZE: <CAMERAS> 511 NEXT

  24. KTD-405 keypad (User Programming) DigiPlex mode Menus Setting the system size • Enter the highest monitor number in your system • Select  or  to skip over this menu SYSTEM SIZE: <MONITORS> 64 NEXT

  25. KTD-405 keypad (User Programming) DigiPlex mode Menus Setting the system size • Enter the highest multiplexer number in your system • Select  or  to skip over this menu SYSTEM SIZE: <MPLXS> 32 NEXT

  26. KTD-405 keypad (User Programming) DigiPlex mode Menus Setting the system size • Enter the highest VCR number in your system • Select  or  to skip over this menu SYSTEM SIZE: <DSR/VCR> 32 NEXT

  27. KTD-405 keypad (User Programming) DigiPlex mode Menus Setting the system size • Enter the highest preset number in your system • Select  or  to skip over this menu SYSTEM SIZE: <PRESETS> 63 NEXT

  28. = , =  KTD-405 keypad (User Programming) DigiPlex mode Menus Restricting system access • This menu restricts access to specified cameras • Use the joystick or these buttons to select the camera • Select  or  to skip over this menu CAMERA 000 ACCESS? YES <+>=YES <->=NO NEXT

  29. = , =  KTD-405 keypad (User Programming) DigiPlex mode Menus Restricting system access • This menu restricts access to specified cameras • Use the joystick or these buttons to select the camera • Select  or  to skip over this menu CAMERA 000 ACCESS? YES <+>=YES <->=NO NEXT

  30. = , =  KTD-405 keypad (User Programming) DigiPlex mode Menus Restricting system access • This menu restricts access to specified monitors • Use the joystick or these buttons to select the monitor • Select  or  to skip over this menu MONITOR 01 ACCESS? YES <+>=YES <->=NO NEXT

  31. = , =  KTD-405 keypad (User Programming) DigiPlex mode Menus Restricting system access • This menu restricts access to specified recorder • Use the joystick or these buttons to select the recorder • Select  or  to skip over this menu • Pressing “+” displays this menu: • Enter a number from 0 to 511, or 0 for NONE or • Select  or  to skip over this menu DSR/VCR 01 ACCESS? YES <+>=YES <->=NO NEXT VCR 01 MATRIX INPUT: 000 <0=NONE> NEXT

  32. = , =  KTD-405 keypad (User Programming) DigiPlex mode Menus Restricting system access • This menu restricts access to specified multiplexer • Use the joystick or these buttons to select the multiplexer • Select  or  to skip over this menu MPLX 01 ACCESS? YES <+>=YES <->=NO NEXT

  33. KTD-405 keypad (User Programming) DigiPlex mode Menus If you pressed “+” (yes): • The next display will show: • Followed by: • Followed by: • The keypad will advance to the next multiplexer menu automatically MPLX01 BRAND CBR DVMRe <,>=SELECT NEXT MPLX 01 MATRIX INPUT? 000 <0=NONE NEXT SELECT MAX OUTPUTS: 02 <,>=SELECT NEXT

  34. KTD-405 keypad (User Programming) DigiPlex mode Menus Programming the monitor offset • Enter a number for the offset needed in your system • Select  or  to skip over this menu MONITOR OFFSET NUMBER: 0 NEXT

  35. KTD-405 keypad (User Programming) DigiPlex mode Menus Queuing and announcing call-ins • If you select “+” in this display: • You need to select either SINGLE or MULTIPLE tone here: • Also specify a monitor to display the queued calls: • Select  or  to skip over this menu ANNUNCIATION? NO <+>=YES <->=NO NEXT CALL TONE TYPE? MULTIPLE <,>=SELECT NEXT SPOT MONITOR NUMBER: 0 <0=UNASSIGNED> NEXT

  36. KTD-405 keypad (User Programming) DigiPlex mode Menus End of menus notification • Pressing  from the previous menu will cause the keypad to display this message: • Select  or press and hold for 3 seconds to exit the menus PRESS <SEQ> FOR 3 SECONDS TO EXIT

  37. = , =  KTD-405 keypad (User Programming) Changing the Operating Mode • Two choices are available: • DigiPlex • Zone • Use the joystick or these buttons to select the mode • Select  or  to skip over this menu OPERATING MODE: ZONE <,>=SELECT NEXT

  38. KTD-405 keypad (User Programming) Zone mode Menus Programming the Mode label • This menu allows you to select one of several labels for the LCD display during normal operations • Selections Include: • ZONE, MPLX, DVMR, TERR, BLDG • FLR, DEPT, STA, SITE, AREA • Select  or  to skip over this menu LCD DISPLAY LABEL: ZONE <,>=SELECT NEXT

  39. KTD-405 keypad (User Programming) Zone mode Menus Programming the zone titles • This menu allows you to select a title to display when the specified zone is being accessed. • Select  or  to skip over this menu • Enter a two-digit code and the keypad will advance to the following menu automatically • Program the label characters the same way as keypad titles • Select  or  to skip over this menu ENTER ZONE ADDRESS: 01 (01-16) NEXT ZONE 01 TITLE: <> (01-16) NEXT

  40. KTD-405 keypad (User Programming) Zone mode Menus Programming the Zone type • This menu allows you to identify the specific device that makes up a zone: • Selections Include: • CALIBUR MMX, CBR DVMRe, CBR TRIPLEX, • CBR DUPLEX, CBR SIMPLEX, MATRIX SWCH, • Select  or  to skip over this menu ZONE 01 HUB: CBR DVMRe <,>=SELECT NEXT

  41. = , =  KTD-405 keypad (User Programming) Zone mode Menus Setting the zone size (monitors) • This menu restricts access only to available zone monitors • Use the number buttons to set the number of monitors • Select  or  to skip over this menu Setting the zone size (cameras) • This menu restricts access only to available zone cameras • Choices include 4, 9, 10, 16 and 32 • Use the joystick or these buttons to select the mode • Select  or  to skip over this menu ZONE 01 MON. OUTPUTS? 01 TO 02 NEXT ZONE 01 CAM. INPUTS? 16 <,>=SELECT NEXT

  42. KTD-405 keypad (User Programming) Zone mode Menus Programming zone access privileges • Program the cameras that this keypad can access: • Program the monitors that this keypad can access: • Program user access to the zone’s recorder : • You should deny access unless you have a Triplex or MMX connected to a VCR using sub-macros. ZONE 1 CAM 01 ACC? YES <+>=YES <->=NO NEXT ZONE 1 MON 01 ACC? YES <+>=YES <->=NO NEXT ZONE 1 RECORDER ACC? YES <+>=YES <->=NO NEXT

  43. KTD-405 keypad (User Programming) Zone mode Menus If the Zone type is set to MATRIX SWCH: • The zone size and access menus displays are slightly different ZONE 02 HUB: MATRIX SWCH <,>=SELECT NEXT

  44. KTD-405 keypad (User Programming) Zone mode Menus Programming zone size • Program the first camera input number for this zone: • Program the number of monitors for this zone: • Program the number of camera inputs on this zone: • Choices include 4, 9, 10, 16 and 32 SELECT START INPUT: 032 <,>=SELECT NEXT ZONE 02 MON. OUTPUTS: 01 TO 16 NEXT ZONE 02 CAM. INPUTS: 64 <,>=SELECT NEXT

  45. KTD-405 keypad (User Programming) Zone mode Menus Programming zone access privileges • Program the cameras that this keypad can access: • Program the monitors that this keypad can access: • Program user access to the zone’s recorder : • You should deny access unless you have a Triplex or MMX connected to a VCR using sub-macros. ZONE 02 CAM 01 ACC? YES <+>=YES <->=NO NEXT ZONE 02 MON 01 ACC? YES <+>=YES <->=NO NEXT ZONE 02 RECORD ACC? YES <+>=YES <->=NO NEXT

  46. KTD-405 keypad (User Programming) Zone mode Menus Queuing and announcing call-ins • If you select “+” in this display: • You need to select either SINGLE or MULTIPLE tone here: • Also specify a monitor to display the queued calls: • Select  or  to skip over this menu ANNUNCIATION? NO <+>=YES <->=NO NEXT CALL TONE TYPE? MULTIPLE <,>=SELECT NEXT SPOT MONITOR NUMBER: 0 <0=UNASSIGNED> NEXT

  47. KTD-405 keypad (User Programming) Zone mode Menus End of menus notification • Pressing  from the previous menu will cause the keypad to display this message: • Select  or press and hold for 3 seconds to exit the menus PRESS <SEQ> FOR 3 SECONDS TO EXIT

  48. Remote Programming

  49. KTD-405 keypad (Remote Programming) To Access Remote Programming: • Press and hold the key • The unit will beep and show the following display • User programming password is 9,5,1, • Correct password entry will cause the following display: • Each selection generates a different set of menus ENTER PROGRAMMING CODE: 1=SWITCHER/MPLX 2=ALARMS 3=CAMERA/RCVR EXIT

  50. KTD-405 keypad (User Programming) Switcher/Mux Menus Switcher/Multiplexer Programming • Identify the device to be programmed • If you select “1” (440) enter the monitor number to use for programming the switcher • The keypad will display this message 1=440 2=CALIBUR 3=340/348 BACK ENTER MONITOR NUMBER: (1-64) BACK SEE MONITOR FOR MENUS HOLD SEQ <3 SEC> TO EXIT

More Related