1 / 10

Control Stations | Specialized Power Products

Specialized Power Products is one of the proficient manufacturers in the development of Marine and Offshore Cables in UAE. The high caliber of quality has been accomplished by persistent technological advancement.

sppeong
Download Presentation

Control Stations | Specialized Power Products

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. What is the use of Control Stations in an Electrical system? Guided By SPPE

  2. Control stations offer the choice of using remote process control signals, so you can use the actuator from your selected location. The control system will be remotely located or some will be directly mounted on the actuator. This provides the complete display of controls and functions that need to be performed. At the places where the actuator is required to use locally or from some nearby location, control system works best in this situation.

  3. You need to control actuators from the central location if it is connected to an integral local control station. You will also get the override control right at the actuator. Challenge 2 REMOTE MOUNTED You can use mounted actuators with eye level motor controls and chain wheel systems, for the remote control applications easily. This will cut down a lot of physical efforts. CONFIGURATIONS OF LOCAL CONTROL STATIONS INTEGRAL TO THE ACTUATOR

  4. CONTROL STATIONS CONTAIN FOLLOWING THINGS

  5. CLOSED (RED) INDICATOR: This indicator makes use of aux contacts from the actuator. This indicator will illuminate when the MODE switch is set for LOCAL or REMOTE and the actuator is fully CLOSED. OPEN (GREEN) INDICATOR: This indicator also uses the aux contacts from the actuator. This indicator will illuminate once the MODE switch is set for LOCAL or REMOTE and the actuator is fully OPEN.

  6. LATCH: • To get access to wiring terminal blocks and actuator wiring entry, you can open it with the screwdriver. • LOCAL POSITIONING KNOB: • When the MODE switch is in the LOCAL position, this weatherproof potentiometer knob controls the signal generator module. • You can find this module inside the enclosure to create the actuator positioning signal.

  7. MODE SWITCH KNOB: This selects the actuator operating mode. If the mode is LOCAL, the potentiometer mounted in the front panel will position the actuator. The actuator positioning signals come from BAS or PLC system when the mode is REMOTE. FEEDBACK SIGNAL: When the actuator generates the feedback signal, it shows on the LCD display screen. For the proper display function, the MODE switch should be on REMOTE or LOCAL position.

  8. POSITIONING SIGNAL: When the control signal being sent to the actuator, LCD display shows that thing. And as a function of the MODE switch, the signals will automatically switch to LOCAL or REMOTE.

  9. SPPE is one of the leading suppliers of Cables and Electric products in Dubai. We are also the largest suppliers of control station in Dubai. For more details contact us.

  10. Visit: www.sppeong.ae Call: 971506526018 Email: calfr@emirates.net.ae

More Related