1 / 6

Do's and don'ts of Flow Meter installation

How to check installed flow meters?<br>Are they installed correctly or not?<br>Your solution is here <br>

sunil29
Download Presentation

Do's and don'ts of Flow Meter installation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Do's and Don'ts of Flow Meter Installation When checking an installed flow meter always begin with the fundamentals. http://www.manasmicro.com

  2. 1. Is the associated instrumentation well suited with your flow meter output? Digital or Analog? Voltage or current? PNP or NPN? Frequency range? Though these difficulties should have been fixed before the flow meter equipment was commissioned, all these incompatibility concerns are often found reasons for a flow meter malfunction. http://www.manasmicro.com

  3. 2. Is your flow meter placed rightly?With various meter types, this may not be an issue but more often than not a flow meter has a preferred direction. If you are using a two-way flow meter check that the quadrature output or backward flow flag are accurately commissioned. http://www.manasmicro.com

  4. 3. Is your flow meter connections correct? Check and double check the connections. If this is your obstacle an easy 2-minute reconnection can have your system up and working. http://www.manasmicro.com

  5. 4. Were the line and your working environment clean during foundation?Cleanliness during flow meter installation is necessary with any mechanical meter and a lot of processes. Rubble carelessly introduced while installation is a frequent situation for early meter malfunction. http://www.manasmicro.com

  6. 5. Are you operating within the flow limit of your meter?Simply because your application utilizes a 25mm pipe it does not mean you will require a 25mm flow meter. Manas Microsystems make flow meters suit to the flow, not the pipe diameter. Connect with us on Social Media http://www.manasmicro.com

More Related