1 / 6

Choosing a Fiber Optic Tool Kit at Sunmafiber

A fairly broad category in the fiber optics sector, the fiber tool kit contains instruments for doing many different tasks. There are kits available for a variety of tasks, including rapid connection termination, mechanical splicing, and fusion splicing, cleaning optics, and testing fiber optics.

sunmafiber
Download Presentation

Choosing a Fiber Optic Tool Kit at Sunmafiber

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. WELCOME TO SUNMAFIBER.COM

  2. Fiber Transceiver SFP Transceiver Module The SFP transceiver supports dual data-rate of 1.25Gbps/10.625Gbps and up to 180km transmission distance with single-mode fiber or 550m with multi-mode fiber. The transceiver consists of two sections: The transmitter section incorporates a FP or DFB laser. The SFP transceiver supports dual data-rate of 1.25Gbps/1.0625Gbps and up to 120km transmission distance with single-mode fiber or 550m with multi-mode fiber.The transceiver consists of two sections: The transmitter section incorporates a FP or DFB laser. the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA).All modules satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable.  Tx Fault indicates that degradation of the laser. Loss of signal (LOS) output indicates the loss of an input optical signal of receiver.

  3. EDFA Optic Amplifier High Power Optical Amplifier The SFP transceiver supports dual data-rate of 1.25Gbps/10.625Gbps and up to 180km transmission distance with single-mode fiber or 550m with multi-mode fiber. The transceiver consists of two sections: The transmitter section incorporates a FP or DFB laser.

  4. Fiber Patchcord Line AFCM-2000 Automatic Fiber Cable Cutting Machine Automatic Opical Fiber Cable Cutting Machine is applied for producing fiber patchcord, and it is a professional equipment with measuring length / cutting and winding fuctions. It could cut different indoor optical fibers into required length and wind cable into circularity.

  5. Optical Power Meter ST-3216 New Optic Power Meter ST-3216 Handheld Optical Power Meter is a newly designed fiber optic tester, which aims at the installation, engineering acceptance and maintenance of fiber network. Compared with other usual power meters, the ST-3216 has more functions. ST-3216 Handheld Optical Power Meter is a newly designed fiber optic tester, which aims at the installation, engineering acceptance and maintenance of fiber network. Compared with other usual power meters, the ST-3216 has more functions, like automatic wavelength identification, auto wavelength switching, intelligent backlight, data savage via USB port. Combined with ST-3116 handheld optical light source, it offers a quick and accurate testing solution on both SM and MM fibers.

  6. Wuhan Sunma Technology Co,.LTD. Address: 88, Mingyuan Road, Optic Valley, Hongshan, Wuhan 430074, Hubei, China Tel : +86-27 8720 8018, +86-27 5177 9650 Fax: +86-27 5177 8865 E-mail: info@sunmafiber.com Website: http://www.sunmafiber.com/

More Related