1 / 3

Analyzing and providing solution for the lightning induced surges

Class B type Surge protectors are DIN rail mountable available in wider range of voltage and current rating. they are extremely powerful device which is inevitable for AC power installations. They come in the zone of LPZ 0-1 for single phase and three phase offering adequate protection from the lightning induced transients in 10/350 µs.<br>

surgeprotection
Download Presentation

Analyzing and providing solution for the lightning induced surges

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Exploring Perfection In Surge Protection Offering Analyzing and providing solution for the lightning induced surges Surge protector, doesn’t look or sound something out of ordinary. A protector unit installed for the detection and suppression of over voltage spikes is around us since decades. Due to the complexity or the technological advancement in equipment manufacturing, there has been made upgradation in the protector modules also. There are specifically designed surge protectors for each and every application.

  2. Exploring Perfection In Surge Protection Offering Class B type protectors are used for the protection against lightning surges. Lightning imposed voltage hike are considered the deadliest among all. Hence, they must be considered as primary cause and the equipment installed against these causes must not be avoided. They are excellent investment for the protection of life and property from the catastrophic effects of increase in the level of standard operating voltage of any equipment. SPDs are classified based on the sources of surge events and also on the applications. You need to choose the appropriate shielding device as per the voltage/ current rating and the application and also the environmental conditions it would be operating at.

  3. Exploring Perfection In Surge Protection Offering Class B/ Type 1 SPD are always installed at the main power supply unit. Power surges carry high amount of voltage but they stay in for few nanoseconds. They can easily blow off any appliances and can also cause electrocution. Its effect can be sudden and dramatic. Power surges can be filtered and safety of the equipment and personal can be guaranteed by installing one such transient suppressing device. Class B type Surge protectors are DIN rail mountable available in wider range of voltage and current rating. They are extremely powerful device which is inevitable for AC power installations. They come in the zone of LPZ 0-1 for single phase and three phase offering adequate protection from the lightning induced transients in 10/350 µs. They are complying to mandatory codes and standards. They ensure protection from possible irreparable damages for a really longer period of time. They are complying to IEC 61643-11 and has a very low response time. Even minute voltage transients are detected and halted from entering your facility. This cost effective solution is easy and fast to install and thus highly recommended.

More Related