140 likes | 262 Views
ASM 215 EDM OPERATION. LIETZ RED MINI 2. MOUNTING. The RED MINI mounts on the theodolite. SIGHTING. Obtain an approximate siting using the gun sight Sight the prism with the siting telescope Sight the center of the prism accurately. MEASURING. Turn the power on
E N D
MOUNTING • The REDMINI mounts on the theodolite.
SIGHTING • Obtain an approximate siting using the gun sight • Sight the prism with the siting telescope • Sight the center of the prism accurately
MEASURING • Turn the power on • Confirm that the REDMINI is operational • Press the MEAS. switch to start measurement • Press the MEAS. switch to end measurement • Turn the power off
TURN THE POWER ON • Press the power switch
TURN THE POWER ON • There will be a short audio tone and the display will look like: • This display will last for about 2 seconds.
TURN THE POWER ON • If the battery voltage is adequate the display will change to: • If the batter voltage is too low the display will change to:
CONFIRM THAT REDMINI IS READY • When the center of the reflecting prism is correctly sighted, the asterisk mark lights up on the display indicating that the light intensity is correct for a measurement. • The “F” indicates that the measurement will be made in feet.
START MEASUREMENT • Press the MEAS. switch to start measurement
START MEASUREMENT • A short audio tone is heard when the REDMINI starts the measurement • The triangle in the lower left corner flashes during measurement • When the measurement is completed, a short audio tone sounds and the value is displayed
END MEASUREMENT • The REDMINI will continue to take measurements until the MEAS. switch is pressed again • then the last measurement is displayed
TURN THE POWER OFF • Press the power switch