1 / 7

Art 12 x 10

Art 12 x 10. Frame stock 1 ½ wide. Measure art, i.e. 12 x 10 Measure Face (width) of molding i.e. 1 ½ wide Add width of Art (12) + 2 x width of Frame (3) = 15 inches + 1/8 inch for glass Cut ‘Top and bottom’ stock 2 @ 15 1/8 OSM Cut sides (10) + (3) + (1/8) 2 @ 13 1/8 OSM.

suzy
Download Presentation

Art 12 x 10

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Art 12 x 10 Frame stock 1 ½ wide • Measure art, i.e. 12 x 10 • Measure Face (width) of molding i.e. 1 ½ wide • Add width of Art (12) + 2 x width of Frame (3) = 15 inches + 1/8 inch for glass • Cut ‘Top and bottom’ stock 2 @ 15 1/8 OSM • Cut sides (10) + (3) + (1/8) 2 @ 13 1/8 OSM

  2. Side View of molding Rabbet ¼’’ ¼’’ Face Back Bottom

  3. Mill all required stock • Finish entire run of stock

  4. T & B Sides • T & B 2@ 15 1/8 OSM • Sides 2@ 13 1/8 OSM • Cut ‘Longer’ sides first, in case of error they can be used for short sides • After cutting verify both ISM (12 1/8) & OSM dimensions (15 1/8)

  5. Use ‘V’ vise to hold pieces • Small amount of glue on each • Drill with nail into ‘Top’ and ‘Bottom’

  6. Side View of molding • Glass • Matting • Picture • Foamcore • Staple • Paper

  7. Mount wire apx. 25% down from Top

More Related