1 / 7

Group E1: Helena Chia, Pey-Hua Hwang, Gregory Padilla, Cameron Wheeler

Group E1: Helena Chia, Pey-Hua Hwang, Gregory Padilla, Cameron Wheeler. Choosing the Design & Making the Molds. Things we had to consider: Consensus Performance Aesthetics Time constraints Difficulties we encountered: Tool Limitations Draft Angles . Red Base. UCL=2.000”

sybill-velasquez
Download Presentation

Group E1: Helena Chia, Pey-Hua Hwang, Gregory Padilla, Cameron Wheeler

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Group E1: Helena Chia, Pey-Hua Hwang, Gregory Padilla, Cameron Wheeler

  2. Choosing the Design & Making the Molds Things we had to consider: Consensus Performance Aesthetics Time constraints Difficulties we encountered: Tool Limitations Draft Angles

  3. Red Base UCL=2.000” LCL=1.997” Cp=4.767 Range=0.04”

  4. Black Cover UCL=2.004” LCL=1.99” Cp=1.303 Range=0.04”

  5. UCL=1.324” LCL=1.302” Cp=1.02 Thermoform Insert

  6. What would we have done differently? • Alternative method/design of creating thermoform windows • Additional complexity of designs (ie injector pins) What if there were no rules? • Different design without thermoform part • Tried to break machines, play with pressure profiles, incorporate “mistakes” into design

  7. Dave and Patrick, THANK YOU!

More Related