1 / 15

A study of tracker resolution by Satellite

A study of tracker resolution by Satellite. 宮本彰也 2008 年 6 月 4 日 ACFA-SIM-J meeting. B dependence of s r j. B: 3  4T, s rf and Pt improves by 25% at High momentum. Geometry Dependence of D K. < Dk > is the avarage of Dk of three geometry results. Costh dependence.

sylvia
Download Presentation

A study of tracker resolution by Satellite

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A study of tracker resolution by Satellite 宮本彰也 2008年6月4日 ACFA-SIM-J meeting

  2. B dependence of srj B: 3  4T, srf and Pt improves by 25% at High momentum

  3. Geometry Dependence of DK <Dk> is the avarage of Dk of three geometry results

  4. Costh dependence

  5. Pt resolution at low momentum Material thickness in unit of radiation lngth (%) From http://ilcphys.kek.jp/soft/geom2/geantino/ScanSummary.htm when multiple scattering dominates j4ldc would be about 15% better than gldapr08 at low momentum if fiited by TPC only Satellite fitting uses TPC+IT+VTX. Difference would be smaller

  6. Backup

  7. Control of TPC spatial resolution If $SATELLITESROOT/macros/S4Macros.C is used, TPC spatial resolution formula can be selected by S4TPC.SpatialResolution. = flat: constant in rphi and Z = experimental: formula implemented by Yamaguchi san = ILD or ILDAuto: ILD formulardescribed by the previous page. If ILD, q1 term is not scaled by Bfield. ILDAuto is default( Scaled by B) JSF parameter name and default values. They are defined in $SATELLITES/macros/S4Macros.C p1=S4TPC.Sig00 [ 0.005 ] p2=S4TPC.Sig0SinDep [0.090] q1=S4TPC.SigLDep [ 0.00053 ] r1=S4TPC.SigmaZ [0.040] S4TPCHit::SetXXXXX can be used to set parameters.

  8. About TPC Resolution Formula suggested by TPC experts: Ron and KeisukeRef) Mail to ild-detector-optimization mailing list, 22-Feb-2008

  9. Control of TPC spatial resolution If $SATELLITESROOT/macros/S4Macros.C is used, TPC spatial resolution formula can be selected by S4TPC.SpatialResolution. = flat: constant in rphi and Z = experimental: formula implemented by Yamaguchi san = ILD or ILDAuto: ILD formulardescribed by the previous page. If ILD, q1 term is not scaled by Bfield. ILDAuto is default( Scaled by B) JSF parameter name and default values. They are defined in $SATELLITES/macros/S4Macros.C p1=S4TPC.Sig00 [ 0.005 ] p2=S4TPC.Sig0SinDep [0.090] q1=S4TPC.SigLDep [ 0.00053 ] r1=S4TPC.SigmaZ [0.040] S4TPCHit::SetXXXXX can be used to set parameters.

More Related