1 / 16

Microthruster Test Rig Design Review Presentation

Erik Mueller Michael White. Microthruster Test Rig Design Review Presentation . Contents. Introduction Problem Solution Sensing Frame Testing Q&A Sources. Microthrusters. Microthrusters produce <1N of thrust ( mN range) Various propulsion systems (standard, mono, ion drive).

tait
Download Presentation

Microthruster Test Rig Design Review Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Erik Mueller Michael White Microthruster Test RigDesign Review Presentation

  2. Contents • Introduction • Problem • Solution • Sensing • Frame • Testing • Q&A • Sources

  3. Microthrusters • Microthrusters produce <1N of thrust (mN range) • Various propulsion systems (standard, mono, ion drive)

  4. The Problem • Thruster and forces involved are minute • Testing must be done in a vacuum • Must be rugged and durable

  5. Our Solution • Sensing is done through direct thrust measurement • Thruster assembly is suspended via a single pole • Entire device is a vacuum chamber

  6. Thrust Sensing - Detail

  7. Indirect Thrust Measurement • Exhaust plume exerts force on a plate Induced Force Thruster

  8. Capacitive Pendulum • Uses electronic principle of capacitance • Needle point fulcrums eliminate frictional losses • Double pendulum plates eliminate mechanical noise

  9. Modified Pendulum: Quadruple Pendulum

  10. Signal Processing • Series of amplifiers and filters used to measure the change in signal

  11. Structure

  12. Frame • Currently still in the conceptual phase • Strong contender is the suspension design, via a single pole from above • Material likely to be aluminum • Easy to work with compared to steel • Strength is more than adequate for the forces involved

  13. Testing

  14. Testing • Currently no concrete plans are in place • Planning to use a set of small conventional chemical thrusters (Estes model rocket engines)

  15. Questions?

  16. Works Cited • http://www.grc.nasa.gov • http://images.machinedesign.com • www.answers.com/topic/piezoelectricity • http://www.boeing.com/defense-space/space/bss/factsheets/xips/xips.html • Traceable calibration of the 3-axis thrust vector in the millinewton range, EB Hughes and S Oldfield, National Physical Laboratory • Direct Thrust Measurement of In-FEEP Clusters, IEPC-2005-235, K. Marhold and M. Tajmar, ARC Seibersdorf research GmbH • Rocket Thrust Measurement For an Estes B6-2 Model Rocket Engine, Peter Hyatt, Jeremy LeFevre, Russell Dibb, Bringham Young University • Thrust stand for ground tests of solid propellant microthrusters, S. Orieux and C. Rossi and D. Esteve, Review of Scientific Instruments, Volume73, Number 7, July 2002 • A Ground Test Rocket Thrust Measurement System, Mary Fran Desrochers, Gary W. Olsen, M. K. Hudson, Department of Applied Science and the Graduate Institute of Technology, University of Arkansas • MilliNewton Thrust Stand Calibration Using Electrostatic Fins, Allen H. Yan, Bradley C. Appel, Jacob G. Gedrimas, Purdue University

More Related