1 / 14

Electrical Work and Power

Electrical Work and Power. Electrical Work and Power. Resistance R. I. +. -. I. Lower V 2. Higher V 1 . Current I flows through a potential difference D V . Follow a charge Q : at positive end, U 1 = QV 1 at negative end, U 2 = QV 2 P.E. Decreases: .

taite
Download Presentation

Electrical Work and Power

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electrical Work and Power

  2. Electrical Work and Power Resistance R I + - I Lower V2 Higher V1 Current I flows through a potential differenceDV Follow a charge Q : at positive end, U1 = QV1 at negative end, U2 = QV2 P.E. Decreases: The speed of the charges is constant in the wires and resistor. What is electrical potential energy converted to?

  3. Electrical resistance converts electrical potential energy to thermal energy (heat), just as friction in mechanical systems converts mechanical energy to heat. This thermal energy means the atoms in the conductor move faster and so the conductor gets hotter. The average kinetic energy of the electrons doesn’t increase once the current reaches a steady state; the electrons lose energy in collisions with the atoms as fast as it is supplied by the field.

  4. Power dissipated by a resistor: Power dissipated= current x potential difference Units: 1 volt x 1 amp = 1 watt (= 1 J/s) For Resistor: V = IR, so there are 2 other equivalent formulas: This power dissipated is called “Joule heating” in a resistor

  5. Examples a) What is the resistance of a “60 watt” bulb? (for a 120-V supply) b) Find R for a 60-W headlamp (12-V battery). c) What power do you get from a “60-W” household bulb if you connect it to a 12-V car battery?

  6. “Electromotive force ε” (emf) ε external work per unit charge Units: J/C = volts(not actually a force) but it “pushes” the charges through the circuit. - + I Eg: Battery (chemical energy  electrical energy) Generator (mechanical energy  electrical energy)

  7. When current leaves the battery the battery supplies power equal to: I = 2 A P = Iε=24W ε=12 V R If current were forced to enter the battery, (as in charging it) then it absorbs the same power What does the energy balance look like in this circuit? Resistor: Electrical energy  heat

  8. Real Batteries I r = “internal resistance” of the battery A r I RL (external resistance, “load”) I B VB + -Ir=VA VA – VB = V = “terminal voltage”  measured “Terminal voltage” ε - Ir = V

  9. Example • A battery has an emf of 12V and an internal resistance of 0.05Ω. Its terminals are connected to a load resistance of 3Ω. Find: • The current in the circuit and the terminal voltage • The power dissipated in the load, the internal resistance, and the total power delivered by the battery

  10. Show that the maximum power lost in the load resistance R occurs when R=r, that is, when the load resistance matches the internal resistance of the battery. Example

  11. Automobile battery: 12.8 V (with 20 A current) 9.2 V (with 200 A current) Find: E and rinternal of battery Example At terminals

  12. Resistance and Temperature Over a limited temperature range, the resistivity of a metal varies approximately linearly with T according to: ρ=ρo[1+α(T-To)] where T is in oC and ρ is the resisitivity. To is usually taken to be 200C and temperature coefficient is given by:

  13. A resistance thermometer measures temperature by measuring the chance in resistance of a conductor. Made of platinum with a resistance of 50.0Ω at 20.0oC is immersed in melting indium and its resistance increases to 76.8Ω. Find the melting point of indium. Example

  14. What is the fractional change in the resistance of an iron filament when its temperature changes from 25.0°C to 50.0°C? Example

More Related