1 / 27

MSE XXX: Introduction to Materials Science & Engineering

MSE XXX: Introduction to Materials Science & Engineering. Course Objective. Introduce fundamental concepts in Materials Science. You will learn about:. • material structure. • how structure dictates properties. • how processing can change structure. This course will help you to:.

tal
Download Presentation

MSE XXX: Introduction to Materials Science & Engineering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MSE XXX: Introduction to Materials Science & Engineering Course Objective... Introduce fundamental concepts in Materials Science You will learn about: • material structure • how structure dictates properties • how processing can change structure This course will help you to: • use materials properly • realize new design opportunities with materials

  2. LECTURES Lecturer: Time: Location: Activities: • Present new material • Announce reading and homework • Take quizzes and midterms* *Make-ups given only for emergencies. *Discuss potential conflicts beforehand.

  3. RECITATIONS Instructor: Times and Places: ___. X:XXam _____ XXX ___. X:XXpm _____ XXX ___. X:XXpm _____ XXX ___. X:XXam _____ XXX ___. X:XXpm _____ XXX Purpose: • Discuss homework, quizzes, exams • Hand back graded quizzes, exams • Discuss concepts from lecture Recitations start next week. Try to attend your registered recitation. If necessary, attend an alternate recitation.

  4. LABORATORY SECTIONS Instructor: Location: Purpose: To learn more about materials by relating lecture material with observations. Also to learn to properly formulate and write engineering reports and proposals.

  5. TEACHING ASSISTANTS E-mail Name Office Tel. _____ _____ XXX X-XXXX _____ _____ _____ XXX X-XXXX _____ _____ _____ XXX X-XXXX _____ _____ _____ XXX X-XXXX _____ _____ _____ XXX X-XXXX _____ Teaching Assistants will • participate in recitation sessions, • have office hours to help you with course material and problem sets.

  6. OFFICE HOURS X:XX-X:XX each weekday** ____. _____ XXX _____ ____. _____ XXX _____ ____. _____ XXX _____ ____. _____ XXX _____ ____. _____ XXX _____ **Contact professors for special arrangements Activities: • Discuss homework, quizzes, exams • Discuss lectures, book • Pick up missed handouts

  7. COURSE MATERIALS (with text) Required text: • Materials Science and Engineering: An Introduction, W.D. Callister, Jr. and D.G. Rethwisch, 8th edition, John Wiley and Sons, Inc. (2010). Optional Material: • _____ ________. • _____ ________. • _____ ________.

  8. COURSE MATERIALS (with WileyPLUS) Required text: • WileyPLUS for Materials Science and Engineering: An Introduction, W.D. Callister, Jr. and D.G. Rethwisch, 8th edition, John Wiley and Sons, Inc. (2010). Website: http://www.wileyplus.com/xxxxxxxxxxx • Can be bought online at wileyplus.com for 40% of textbook price • Includes complete online version of textbook • Or comes bundled with textbook at bookstore • $5 more than textbook alone • Homework assignments with instant feedback and hints • Computer graded self-help problems • Hotlinks in homework to supporting text section • Quizzes

  9. WEBSITES Course Website: http://www.xxx.edu/xxxxx • Syllabus • Lecture notes • Answer keys • Grades Text Website: http://www.wiley.com/college/callister • VMSE for 3D visualization and manipulation of atomic structures • Mechanical Engineering and Biomaterials online support modules • Case studies of materials usage • Extended learning objectives • Self-assessment exercises

  10. Virtual Materials Science & Engineering (VMSE) Website: http://www.wileyplus.com/college/callister Student Companion Site • Users can manipulate molecules and crystals to better visualize atomic structures • Unit cells such as BCC, FCC, HCP • Crystallographic planes, directions, and defects • Polymer repeat units and molecules • Diffusion computations

  11. GRADING Weekly in-lecture quizzes XX% Held on _____ at the beginning of class Based on core homework problems Your lowest quiz grade will be dropped Midterm #1 XX% Tentatively scheduled for: Material covered: Midterm #2 XX% Tentatively scheduled for: Material covered: Final XX% Tentatively scheduled for: Material covered:

  12. READING SCHEDULE Week 1 2 3 4 5 6 7 8 9 10 Topic General Intro; Atomic Bonding Crystalline Structures; Imperfections Diffusion; Mechanical Properties Strengthening Mechanisms; Failure Phase Diagrams Phase Transformations Applications & Processing of Metal Alloys Struc., Prop., Proc., Applic. of Ceramics Struc., Prop. of Polymers; Composites Corrosion; Elec. & Thermal Prop. Magnetic & Optical Prop. Econ. & Envir. Issues Chapter 1,2 3,4 5,6 7,8 9 10 11 12,13 14,15,16 17,18,19 20,21 22 Lectures: will highlight important portions of each chapter.

  13. Chapter 1 - Introduction • What is materials science? • Why should we know about it? • Materials drive our society • Stone Age • Bronze Age • Iron Age • Now? • Silicon Age? • Polymer Age?

  14. Example – Hip Implant • With age or certain illnesses joints deteriorate. Particularly those with large loads (such as hip). Adapted from Fig. 22.25, Callister 7e.

  15. Example – Hip Implant • Requirements • mechanical strength (many cycles) • good lubricity • biocompatibility Adapted from Fig. 22.24, Callister 7e.

  16. Example – Hip Implant Adapted from Fig. 22.26, Callister 7e.

  17. Hip Implant • Key problems to overcome • fixation agent to hold acetabular cup • cup lubrication material • femoral stem – fixing agent (“glue”) • must avoid any debris in cup Ball Acetabular Cup and Liner Femoral Stem Adapted from chapter-opening photograph, Chapter 22, Callister 7e.

  18. Example – Develop New Types of Polymers • Commodity plastics – large volume ca. $0.50 / lb Ex. Polyethylene Polypropylene Polystyrene etc. • Engineering Resins – small volume > $1.00 / lb Ex. Polycarbonate Nylon Polysulfone etc.Can polypropylene be “upgraded” to properties (and price) near those of engineering resins?

  19. Structure, Processing, & Properties (d) 30mm (c) (b) (a) 4mm 30mm 30mm • Properties depend on structure ex: hardness vs structure of steel 6 00 5 00 Data obtained from Figs. 10.30(a) and 10.32 with 4 wt% C composition, and from Fig. 11.14 and associated discussion, Callister & Rethwisch 8e. Micrographs adapted from (a) Fig. 10.19; (b) Fig. 9.30;(c) Fig. 10.33; and (d) Fig. 10.21, Callister & Rethwisch 8e. 4 00 Hardness (BHN) 3 00 2 00 100 0.01 0.1 1 10 100 1000 Cooling Rate (ºC/s) • Processing can change structure ex: structure vs cooling rate of steel

  20. Types of Materials • Metals: • Strong, ductile • High thermal & electrical conductivity • Opaque, reflective. • Polymers/plastics: Covalent bonding  sharing of e’s • Soft, ductile, low strength, low density • Thermal & electrical insulators • Optically translucent or transparent. • Ceramics: ionic bonding (refractory) – compounds of metallic & non-metallic elements (oxides, carbides, nitrides, sulfides) • Brittle, glassy, elastic • Non-conducting (insulators)

  21. The Materials Selection Process 1. Pick Application Determine required Properties Properties: mechanical, electrical, thermal, magnetic, optical, deteriorative. 2. Properties Identify candidate Material(s) Material: structure, composition. 3. Material Identify required Processing Processing: changes structure and overall shape ex: casting, sintering, vapor deposition, doping forming, joining, annealing.

  22. 6 5 Cu + 3.32 at%Ni 4 Cu + 2.16 at%Ni Resistivity, r deformed Cu + 1.12 at%Ni 3 (10-8 Ohm-m) 2 Cu + 1.12 at%Ni 1 “Pure” Cu 0 -200 -100 0 T (ºC) ELECTRICAL • Electrical Resistivity of Copper: Adapted from Fig. 18.8, Callister & Rethwisch 8e. (Fig. 18.8 adapted from: J.O. Linde, Ann Physik5, 219 (1932); and C.A. Wert and R.M. Thomson, Physics of Solids, 2nd edition, McGraw-Hill Company, New York, 1970.) • Adding “impurity” atoms to Cu increases resistivity. • Deforming Cu increases resistivity.

  23. 400 300 (W/m-K) Thermal Conductivity 200 100 0 0 10 20 30 40 Composition (wt% Zinc) 100mm THERMAL • Space Shuttle Tiles: -- Silica fiber insulation offers low heat conduction. • Thermal Conductivity of Copper: -- It decreases when you add zinc! Adapted from chapter-opening photograph, Chapter 17, Callister & Rethwisch 3e. (Courtesy of Lockheed Missiles and Space Company, Inc.) Adapted from Fig. 19.4W, Callister 6e. (Courtesy of Lockheed Aerospace Ceramics Systems, Sunnyvale, CA) (Note: "W" denotes fig. is on CD-ROM.) Adapted from Fig. 19.4, Callister & Rethwisch 8e. (Fig. 19.4 is adapted from Metals Handbook: Properties and Selection: Nonferrous alloys and Pure Metals, Vol. 2, 9th ed., H. Baker, (Managing Editor), American Society for Metals, 1979, p. 315.)

  24. Fe+3%Si Fe Magnetization Magnetic Field MAGNETIC • Magnetic Storage: -- Recording medium is magnetized by recording head. • Magnetic Permeability vs. Composition: -- Adding 3 atomic % Si makes Fe a better recording medium! Adapted from C.R. Barrett, W.D. Nix, and A.S. Tetelman, The Principles of Engineering Materials, Fig. 1-7(a), p. 9, Electronically reproduced by permission of Pearson Education, Inc., Upper Saddle River, New Jersey. Fig. 20.23, Callister & Rethwisch 8e.

  25. OPTICAL polycrystal: low porosity polycrystal: high porosity single crystal • Transmittance: -- Aluminum oxide may be transparent, translucent, or opaque depending on the material structure. Adapted from Fig. 1.2, Callister & Rethwisch 8e. (Specimen preparation, P.A. Lessing; photo by S. Tanner.)

  26. -8 10 “as-is” “held at 160ºC for 1 hr crack speed (m/s) before testing” -10 10 Alloy 7178 tested in saturated aqueous NaCl solution at 23ºC increasing load 4mm -- material: 7150-T651 Al "alloy" (Zn,Cu,Mg,Zr) Adapted from Fig. 11.26, Callister & Rethwisch 8e. (Provided courtesy of G.H. Narayanan and A.G. Miller, Boeing Commercial Airplane Company.) DETERIORATIVE • Stress & Saltwater... -- causes cracks! • Heat treatment: slows crack speed in salt water! Adapted from Fig. 11.20(b), R.W. Hertzberg, "Deformation and Fracture Mechanics of Engineering Materials" (4th ed.), p. 505, John Wiley and Sons, 1996. (Original source: Markus O. Speidel, Brown Boveri Co.) Adapted from chapter-opening photograph, Chapter 16, Callister & Rethwisch 3e. (from Marine Corrosion, Causes, and Prevention, John Wiley and Sons, Inc., 1975.)

  27. SUMMARY Course Goals: • Use the right material for the job. • Understand the relation between properties, structure, and processing. • Recognize new design opportunities offered by materials selection.

More Related