1 / 17

Beam Test @ GSI

Beam Test @ GSI. 12 C beam, 1 GeV/A, Pb-target Tested: Inner Read-Out Chamber 512 channels equipped with CERES preamp & FADC/Altro purpose: test stability of chamber at high load (< 50% occupancy) and high gain (<3  10 4 ). chamber. target. beam. Setup in CAVE B. Readout Scheme.

tameka
Download Presentation

Beam Test @ GSI

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Beam Test @ GSI • 12C beam, 1 GeV/A, Pb-target • Tested: Inner Read-Out Chamber • 512 channels equipped with CERES preamp & FADC/Altro • purpose: test stability of chamber at high load (< 50% occupancy) and high gain (<3  104)

  2. chamber target beam Setup in CAVE B

  3. Readout Scheme

  4. Readout Scheme

  5. Cable

  6. CERES t=323 ns minimal undershoot t=426 ns

  7. Online Event Display

  8. Example: Pad Signal

  9. Occupancy (Pad-Time)

  10. Occupancy (Pad-Time)

  11. Occupancy vs. Target Thickness Uanode=1280 V 5 mm/ ≈ 20 A 10 mm/ ≈ 35 A

  12. Occupancy vs. Anode Voltage Uanode=1200 V Uanode=1250 V

  13. Occupancy vs. Beam Intensity R = 0.25106 part./spill R = 0.7106 part./spill R = 1.2106 part./spill

  14. Occupancy vs. Sum of Pad Signals

  15. Anode Signal low average current max. drift time

  16. Anode-Sum vs. Occupancy

  17. Summary • IROC tested at: • <Ianode> ≈ 5-80 A • occupancies ≤ 50% • Uanode ≤ 1300 V • we oberve: • stable operation • Ianode = 0 between spills • no saturation or gain drop in pad signals

More Related