1 / 10

Oriental Star adiabatic elastic coating

Oriental Star adiabatic elastic coating . PD-660. [Product Description]. Oriental Star insulation paints are compounded of polymeric resins and inorganic insulating powders, which features a flexible film and excellent adhesion, and thermal insulation and water-resistance . 【Features】.

tannar
Download Presentation

Oriental Star adiabatic elastic coating

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Oriental Star adiabatic elastic coating PD-660 Protactinium 台 灣 拓 鏷 化 工

  2. [Product Description] • Oriental Star insulation paints are compounded of polymeric resins and inorganic insulating powders, which features a flexible film and excellent adhesion, and thermal insulation and water-resistance . Protactinium 台 灣 拓 鏷 化 工

  3. 【Features】 1.finished thick coating does not crack , this product features a crack-bridging property. 2.waterborne with no odor , which does not hurt the body, easily cleaning. 3.Thermal insulation, Chilly penetration prevention . Protactinium 台 灣 拓 鏷 化 工

  4. The scope of application • building, facades, terraces, patios, etc. and wooden roof, cement roofing , stone sinks, metal and other surfaces of various materials waterproof, thermal insulated, durable protection. Protactinium 台 灣 拓 鏷 化 工

  5. Construction Description] • 1.when use as primer ,please Stir before using. • 2. The product is not recommended diluted heavily, use clean tap water for dilution, please refer to the bottom of dilution recommendations. • 3. brushing the first coat after a cured primer, drying time of one coat is approximately 3-4 hours. • 4. then finish brushing the second coat about 3-4 hours later. Protactinium 台 灣 拓 鏷 化 工

  6. Other Information] • 1. Coating Method: Roller, trowel • 2. Drying time: setting time is about 2-3 hours (25C) • 3 .Packing: 18KG ± 0.5KG • 4 . colors: white, gray • 5. Thinner: water can be added for dilution and dose by recommendation of 3-5%, 5-8% water diluted when sprayed • 6.coverage : 65-70 m2 / plastic drum, wet films are around    0.23mm-0.25mm. • 7. Shelf Life: Under normal conditions, kept for half an year. Protactinium 台 灣 拓 鏷 化 工

  7. Product data • Viscosity: 1500-2500cps  PH value: 8.5-9.5  Tear strength: 30 kgf / cm  Elongation: 150% referred to SGS test report : • Test method: ASTM C518-10 • AV Temp :11.2 C • Temp Gradient: 1056.61 • Thermal Transmission properties : • K= 0.0863 Protactinium 台 灣 拓 鏷 化 工

  8. Safety and Health Information • Do not eat or Swallow, despite it is not harmful to your health! • If accidentally touches the eyes or skin, wash immediately with plenty of water and seek medical advice as appropriate. • Do not use this empty container of product for storing food. Protactinium 台 灣 拓 鏷 化 工

  9. Practical proposal • 1. You can use a brush or roller to paint the substrates no need for primers when is implemented on steel roofing , and due to relatively thin film coating is good for drying. 2 Then in the implementation of the second and third coatings, the coating of its thickness is up to 0.45-0.55mm , which will feature excellent insulation effect . Protactinium 台 灣 拓 鏷 化 工

  10. THE END Protactinium 台 灣 拓 鏷 化 工

More Related