1 / 7

Simple Hardware Design

Simple Hardware Design. Lab 1 Introduction. Create Embedded System using BSB. Verify HW Operation with generated Test Application. OPB Bus. PLB Bus. UART. GPIO. DIP Switches. PLB2OPB. PPC. GPIO. Push Buttons. PLB BRAM Cntlr. PLB BRAM. MY IP. LEDs. PLB BRAM Cntlr. PLB BRAM.

taran
Download Presentation

Simple Hardware Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Simple Hardware Design Lab 1 Introduction This material exempt per Department of Commerce license exception TSU

  2. Create Embedded System using BSB Verify HW Operation with generated Test Application OPB Bus PLB Bus UART GPIO DIP Switches PLB2OPB PPC GPIO Push Buttons PLB BRAM Cntlr PLB BRAM MY IP LEDs PLB BRAM Cntlr PLB BRAM Timer INTC ICON IBA

  3. Introduction • This lab will guide you through the process of creating a simple processor system by using Base System Builder (BSB) to target the XUP Virtex-II Pro board

  4. Objectives After completing this module, you will be able to: • Create an XPS project by using BSB • Create a simple hardware design by using Xilinx IP

  5. Errata • There are external ports that are tied to ground • Listed in MHS and UCF

  6. External Ports System Assembly View Delete these Ground pins

  7. UCF File Located under Project tab Delete these Pin constraints for The Ground pins

More Related