1 / 11

Quadrupole Cryostats

Quadrupole Cryostats. T. Nicol Fermilab – Technical Division. Misc preliminary design criteria. Single phase MAWP*: 200 psi Two phase MAWP: 50 psi LN 2 shield MAWP: 100 psi Heat load to 4K: 5 W per device (spool, quad, etc.) Single phase operating pressure: 16 psig

taryn
Download Presentation

Quadrupole Cryostats

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Quadrupole Cryostats T. Nicol Fermilab – Technical Division Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

  2. Misc preliminary design criteria • Single phase MAWP*: 200 psi • Two phase MAWP: 50 psi • LN2 shield MAWP: 100 psi • Heat load to 4K: 5 W per device (spool, quad, etc.) • Single phase operating pressure: 16 psig • Two phase operating pressure: 5 psig *: MAWP is Maximum Allowable Working Pressure Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

  3. Misc lengths and cryo service notes Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

  4. Lattice printout (page 1) Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

  5. Triplet layout from lattice Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

  6. Cryostat cross section Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

  7. Cryostat solid model cross section Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

  8. Q2 isometric view Cold mass supports External supports and lift points Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

  9. Q2 upstream end Two phase supply Two phase annular shell Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

  10. Q2 downstream end Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

  11. Q2 post to cold mass interface Fermilab Internal CD1 Review of BTeV – March 30-April 1, 2004 Quadrupole Cryostat Breakout

More Related