1 / 9

Muon g-2 Experiment at Fermilab

Muon g-2 Experiment at Fermilab. Recycler Extraction Kicker Dan Wolff/Chris Jensen 8/29/08. Specifications Existing Recycler Kicker. KICK ANGLE: 1.288 mrad FIELD RISE TIME: 1.44E-07 sec INTEGRATED FIELD STRENGTH: 3.82E-02 (W/m^2) HEIGHT OF MAGNET GAP: 0.052 m

taya
Download Presentation

Muon g-2 Experiment at Fermilab

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Muon g-2 Experiment at Fermilab Recycler Extraction Kicker Dan Wolff/Chris Jensen 8/29/08

  2. SpecificationsExisting Recycler Kicker • KICK ANGLE: 1.288 mrad • FIELD RISE TIME: 1.44E-07 sec • INTEGRATED FIELD STRENGTH: 3.82E-02 (W/m^2) • HEIGHT OF MAGNET GAP: 0.052 m • WIDTH OF MAGNET GAP: 0.107 m

  3. Timing

  4. Using Existing Recycler Systems • Number of magnets/pulsers needed: 2 • 2 needed because of rep rate • Magnet Voltage: 14 kv • Magnet Current: 550 amps • Maximum Field: 130 gauss • Field Rise Time: 185 nsec • Tunnel Space Needed: 3.6 m

  5. Existing Magnet

  6. Cooling Skid

  7. Existing Pulser and PFL

  8. Changes/Upgrades Needed • Estimate 250 W in termination resistors • need new termination resistors, external cooling system (Flourinert cooling skid), plumbing to tunnel, and reworking magnet. • Need new (faster) charging power supplies • Shorter PFL • Need new pulser controls • Space in a nearby Service Building?????

  9. Costs and Labor

More Related