Reflection of Light

1. Reflection and Refraction of Light Reflection of Light Refraction of Light

2. Definitions • Incident wave-the incoming light wave. • Reflected wave-the wave that is bounced away from the surface. • Refracted-light waves are bent. • Total internal reflection- an optical phenomenon that occurs when a ray of light strikes a medium boundary at an angle larger than a particular critical angle with respect to the normal to the surface. • Critical angle- the angle of incidence above which total internal reflection occurs. • Normal- to a flat surface is a vector that is perpendicular to that surface. To a non-flat surface at a point P on the surface is a vector perpendicular to the tangent plane to that surface at P.

3. Reflection • The production of an image by or as if by a mirror. • Something, such as light, radiant heat, sound, or an image, that is reflected. • The change in direction of a wave, such as a light or sound wave, away from a boundary the wave encounters. Reflected waves remain in their original medium rather than entering the medium they encounter.

4. Reflection • According to the law of reflection, the angle of reflection of a reflected wave is equal to its angle of incidence.

5. Diffuse Reflection • Light is reflected in all directions. • This is caused by a surface that isn’t smooth.

6. Specular reflection • All the light travelling in one direction and reflecting from the mirror is reflected in one direction. • This occurs on a smooth surface.

7. Definitions • Focal point- the single point where light from the object hits or is focused. Located half the distance from the mirror to the center of curvature. • Focal length- the distance from the reflecting surface to the focal point. • Real- formed when the incident and reflected rays intersect in front of the mirror. • Virtual- does not actually exist (no light is produced). Occur at points where extensions from incident and reflected rays converge behind the mirror. • Center of Curvature- the center of that original sphere. • Radius of Curvature- the radius of the sphere. • Vertex- the point where the mirror crosses the principal axis. • Principal axis- a line drawn through the vertex, focus and center of curvature.

8. Plane Mirrors Just kidding

9. Plane Mirrors • A mirror with a flat surface • Properties of an image in a plane mirror • The image is upright • The image is the same size as the object • The image is the same distance from the mirror as the object appears to be • The image is virtual, not real, because the light rays do not actually pass through the image.

10. Spherical Mirrors • A piece cut out of a reflective sphere. • Focal length of a spherical mirror: f=R/2 • Either concave or convex.

11. Convex Mirrors or Diverging Mirror • Image is virtual and upright. • Used for security in stores and on the passenger side of many cars. • Light rays that strike the mirror surface are reflected so that they diverge, or “go apart,” and they never come to a point. • The focal length is negative. • The object and focus are on opposite sides of the mirror. • All images are smaller than the object.

12. Rules of Reflection for Convex Mirrors • Any incident ray traveling parallel to the principal axis on the way to a convex mirror will reflect in such a manner that its extension will pass through the focal point. • Any incident ray traveling towards a convex mirror such that its extension passes through the focal point will reflect and travel parallel to the principal axis. • Any incident ray which is directed towards the center of curvature of the mirror is reflected back along its own path.

13. Concave Mirror or Converging Mirror • Can have either real or virtual images. • Light rays that strike the mirror surface are reflected so that they converge, or “come together,” at a point. • Focal length is positive. • The object and the focus are on the same side of the mirror.

14. Rules of Reflection for Concave Mirrors • Any incident ray traveling parallel to the principal axis on the way to the mirror will pass through the focal point upon reflection. • Any incident ray passing through the focal point on the way to the mirror will travel parallel to the principal axis upon reflection.

15. The Mirror Equation • 1/do+1/di=1/f • do is the distance from the mirror to the object • di is the distance from the mirror to the image • f is the focal length of the mirror

16. Magnification • In most cases the height of the image differs from the height of the object. This means that the mirror has done some magnifying or reducing.

17. Magnification • M=hi/ho=-di/do • The ratio of the image height to the object height, which is closely related to the ratio of the image distance to the object distance.

18. Magnification • M=hi/ho=-di/do • If magnification is 1 then the object and the image are the same size. If m>1 then the image is larger. If m<1 then the image is smaller. If m>0 then the image is upright and if m<0 then the image is inverted.

19. Refraction • The change of direction of a ray of light, sound, heat, or the like, in passing obliquely from one medium into another in which its wave velocity is different. • The change in the angle of propagation depends on the difference between the index of refraction of the original medium and the medium entered by the wave, as well as on the frequency of the wave.

20. Refraction • The speed of light in a vacuum is 3.00x108 m/s. • When light travels through a different material, it travels at a different speed.

21. IndexofRefraction • The speed of light in a given material is related to a quantity called the index of refraction, n. • Index of refraction: n=c/v • The ratio of the speed of light (c) in a vacuum to the speed of light in the medium (v). • The wavelength changes as well. • Index of refraction in terms of wavelength • N=λ/λm • where λ is the wavelength in vacuum and λm is the wavelength in the medium

22. Refraction • Although the speed changes and wavelength changes, the frequency will be constant. • Frequency, wavelength, and speed are related by: • V=fλ

23. Snell’s Law • The relationship between the angles of incidence and refraction and the indices of refraction of the two media. • N1sinθ1=n2sinθ2 or sinθ1/sinθ2=v1/v2

24. Definitions • Lens- a carefully ground or molded piece of transparent material that refracts light rays in such a way as to form an image. • Principal axis- the horizontal axis. • 2F point- the point on the principal axis that is twice as far from the vertical axis as the focal point.

25. Converging Lenses • A lens that converges rays of light that are traveling parallel to its principal axis.

26. Diverging Lenses • A lens that diverges rays of light that are traveling parallel to its principal axis.

27. Double Convex Lens • The fact that a double convex lens is thicker across its middle is an indicator that it will converge rays of light that travel parallel to its principal axis.

28. Double Concave Lens • The fact that the double concave lens is thinner across its middle is an indicator that it will diverge rays of light that travel parallel to its principal axis.

29. Refraction Rules for a Converging Lens • Any incident ray traveling through the focal point on the way to the lens will refract through the lens and travel parallel to the principal axis. • Any incident ray traveling parallel to the principal axis of a converging lens will refract through the lens and travel through the focal point on the opposite side of the lens.

30. Refraction Rules for a Diverging Lens • Any incident ray traveling parallel to the principal axis of a diverging lens will refract through the lens and travel in line with the focal point (i.e., in a direction such that its extension will pass through the focal point). • Any incident ray traveling towards the focal point on the way to the lens will refract through the lens and travel parallel to the principal axis.

31. A Third Rule of Refraction • An incident ray that passes through the center of the lens will in affect continue in the same direction that it had when it entered the lens.

32. Converging Lens Image Formation • Can produce real and virtual images.

33. Object-Image Relations for Diverging Lens

34. Object-Image Relations for Converging Lens • If the object is located beyond 2F: • If the object is located at 2F: • If the object is located between 2F and F: • If the object is located at F: • If the object is located in front of F:

35. Diverging Lens Image Formation • Can only produce virtual images.

36. Thanks to: • http://www.bing.com/images/search?q=reflection+and+refraction+of+light&view=detail&id=E4D2AA8D76FC3701A83E162D491416A100BD1B55&first=0&FORM=IDFRIR • http://micro.magnet.fsu.edu/primer/lightandcolor/reflectionintro.html • http://uk.ask.com/wiki/Surface_normal • http://dictionary.reference.com/browse/reflection • http://physics.bu.edu/~duffy/PY106/Reflection.html • http://micro.magnet.fsu.edu/primer/lightandcolor/reflectionintro.htmlhttp://www.pa.msu.edu/courses/2000spring/PHY232/lectures/mirrors/focal.html • http://www.micro.magnet.fsu.edu/primer/lightandcolor/mirrorsintro.html • http://gbhsweb.glenbrook225.org/gbs/science/phys/Class/refln/u13l4a.html • http://electron9.phys.utk.edu/optics421/modules/m1/mirrors.htm • http://peggyschweiger.tripod.com/mirrors.html • http://physics.bu.edu/~duffy/PY106/Reflection.html • http://physics.bu.edu/~duffy/PY106/Reflection.html • http://www.physicsclassroom.com/Class/refrn/u14l2b.cfm • http://www.physicsclassroom.com/class/refrn/U14l5b.cfm • http://learn.uci.edu/oo/getOCWPage.php?course=OC0811004&lesson=005&topic=009&page=36