1 / 9

Dimensioning Standards Part 3

Dimensioning Standards Part 3. Cylinders. Generally dimensioned in profile view . is used to avoid confusion with a linear dimension. Curved Features. Points are placed along the contour and are dimensioned from the datum. Datum. Reference Dimensions. Reference Dimension (..):

teagan
Download Presentation

Dimensioning Standards Part 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Dimensioning Standards Part 3

  2. Cylinders Generally dimensioned in profile view • is used to avoid confusion • with a linear dimension.

  3. Curved Features Points are placed along the contour and are dimensioned from the datum. Datum

  4. Reference Dimensions Reference Dimension (..): duplicated or unnecessary, just an “fyi” TYP: Dimension is same for each of these features Feature occurs twice

  5. Chamfers External chamfer for 45 degree chamfers only. There are two options. Internal chamfers. External chamfer for angles other than 45 degrees.

  6. Fillets Rounds Fillets and Rounds

  7. Conical Tapers

  8. Keyway Keyseat Keyway and Keyseat

More Related