70 likes | 78 Views
Device to Device D2D communication is a wireless peer to peer service, that allows direct communication to discharge hub input by binding wireless broadcasting amongst devices, as a vital technology module for next generation cellular communication system. Mobile devices limited battery power is a barricade for harnessing the performance of cellular communication systems. High data rate Device to Device communication is requisite to boost the crescent traffic requirement of apparent applications. In this paper suggest a centralized relay selection and power allocation process to state a multi objective optimization trouble to clearance the commutation in between total transmit power and system throughput. The proposed framework, suggest lowest perplexity modulation and demodulation procedure by route discovery for Generalized frequency division multiplexing systems. The proposed diplomacy deed the peculiar framework of the modulation matrix to depress the computational rate in the absence of meet with any performance loss distress. Centralized algorithm to discover the outcome in polynomial time. Proposed algorithms markedly minimize the total transmit power and enhance the system throughput. Surya S M | Prof. K. Kalai Selvi "Energy-Efficient Resource Allocation and Relay Selection Schemes for D2D Communications in 5G Wireless Networks" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30413.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30413/energyefficient-resource-allocation-and-relay-selection-schemes-for-d2d-communications-in-5g-wireless-networks/surya-s-m<br>
E N D
International Journal of Trend in Scientific Research and Development (IJTSRD) Volume 4 Issue 3, April 2020 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470 Energy-Efficient Resource Allocation and Relay Selection Schemes for D2D Communications in 5G Wireless Networks Surya S M1, Prof. K. Kalai Selvi2 1PG Student, Department of Communication Systems, 2Assistant Professor (RD), Department of Electronics and Communication Engineering, 1,2Government College of Engineering, Tirunelveli, Tamil Nadu, India ABSTRACT Device-to-Device (D2D) communication is a wireless peer-to-peer service, that allows direct communication to discharge hub input by binding wireless broadcasting amongst devices, as a vital technology module for next- generation cellular communication system. Mobile devices limited battery power is a barricade for harnessing the performance of cellular communication systems. High data rate Device-to-Device communication is requisite to boost the crescent traffic requirement of apparent applications. In this paper suggest a centralized relay selection and power allocation process to state a multi-objective optimization trouble to clearance the commutation in between total transmit power and system throughput. The proposed framework, suggest lowest perplexity modulation and demodulation procedure by route discovery for Generalized frequency division multiplexing systems. The proposed diplomacy deed the peculiar framework of the modulation matrix to depress the computational rate in the absence of meet with any performance loss distress. Centralized algorithm to discover the outcome in polynomial time. Proposed algorithms markedly minimize the total transmit power and enhance the system throughput. KEYWORDS: Full-duplex relaying, D2D communication, multi-objective optimization, matching theory I. INTRODUCTION The actual modifications and employ technics processing in the field of strewing hub on task for the unending swell bid for bandwidth. Alongside with progression in bandwidth condensed appliance, the amount of devices by oneness domain is evenly swelling explicitly. The well-known fourth generation (4G) cellular systemsemploy the technologies like Orthogonal Frequency Division Multiplexing (OFDM), Multiple Input Multiple Output (MIMO), massive small cell deployment, Heterogeneous Network (Het Net) and relays are proficient by upgrading the efficiency. Only such technologies would not be accomplished to render the crescent claim towards taunt bandwidth[1]. Therefore, researchers are look for latest renegade pattern in cellular connections. Thus, the fifth generation (5G) cellular technology would be contracted to surmount the range destitution and serve out another users, beyond 4G. The 5G automation would operate Millimeter Wave (mmWave) range for automation, where the range is matchless analyze to the cellular setup manage in frequencies. Device-to-Device (D2D) communication have the potential to improve the spectrum efficiency between two mobile users by allowing nearby devices within a cellular network outwardly penetrate the hub, and is a obstreperous technology guidance over 5G. How to cite this paper: Surya S M | Prof. K. Kalai Selvi "Energy-Efficient Resource Allocation and Relay Selection Schemes for D2D Communications in 5G Wireless Networks" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456- 6470, Volume-4 | Issue-3, April 2020, pp.788-794, www.ijtsrd.com/papers/ijtsrd30413.pdf Copyright © 2020 by author(s) and International Journal of Trend in Scientific Research and Development Journal. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (CC (http://creativecommons.org/licenses/by /4.0) IJTSRD30413 URL: BY 4.0) D2D relation cause the payoff of elevated data rate, increased spectrum and too make perfect link capacity. It can equally dump input from the base stations whereas fulfill the interference levels and avert congestion. In reckoning to the aforementioned payoff, it get along with with long- established existent connection. The 5G elemental high tech are promote to negotiate the range deficiency by scout about the mmWave scale. Due to raised recurrence, succinct disparity fading possessions and meteorological inhalation, mmWave intercommunication is an insufficient field revelation. Outdoor propagation render affluent multi-path at and above 28 GHz frequency, exploitant which the gain acquire signal capability can be mended. Directional beam forming and smart antennas enhance the advancement withadvanced grade connections. Thus, the consolidation of D2D automation with mmWave intercommunication wish sake the interest of both the scientific knowledge. A.Existing System In a regular structural grid, client input is transmissible via hub once UE is exchanging together with dissimilar one. Yet whether the two UEs are relativement from each other, be in touch just instead of using base station it should be sensible from transmit power of both UEs and base station, core network as well as radio access could be enregistered. These are deployed through device to device communication. @ IJTSRD | Unique Paper ID – IJTSRD30413 | Volume – 4 | Issue – 3 | March-April 2020 Page 788
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470 However, under there are group of protocol enhancements and easy to use limits for D2D intercommunication similar as: conflict to and from primitive network, a new paradigm may be poor quality than network performance between base station and UEs and define QoS requirements of D2D communication. II. Full duplex relays are fixed between two users to collaborate with D2D users which user have poor direct link quality or to allocate an extended good communication range. The extended communication sends the modulation signal to base station and control messages send through the control channel to other users and to systematize the redeployment of resources. For allocation of resource we denote the set of relays as R. The propagation channel of source and destination which determine by receiver of whole system are point out by S and D, respectively. We have to undertake that the destination and D2D users are with the unchanging provider of service. The relays which assist nearby D2D pairs can share frequency resources that the time domain owns, while those users that do not desire additional signal dimension to use different spectral resources. Relaying mechanism can aid multiple D2D communication and propose a distributed solution using spectrum utilization. Every relay in D2D pairs is processed with set of antennas that operate in full- duplex mode. The relay protocol used in full duplex is decode-and-forward protocol which is employed by the relays to analyze the performance of relay network. As discussed in 3GPP long term evolution system and related researchers, each D2D user pair is assigned using communication pairs of both uplink and downlink resource in dedicated mode, where new interference among users is negligible. The D2D user pairs communicate directly between portable nearby wireless devices in dedicated base station and are distributed over same shared cellular spectrum. By considering the possible non-line-of-sight(NLOS) channel modeling can be improved . The main objective is to minimize the power consumption of mobile devices also improve the system throughput. Single-objective problem formulation is different from multi-objective combinatorial optimization problem it balances the trade-off between total transmit power and system throughput. PROPOSED SYSTEM In this project, performance of relay selection in relay assisted multiple network, which differs from typical relay aided D2D users is discussed in the following aspects. 1.Choosing a relay in underlaying cellular network should coordinate the end-users to and from integral network. 2.The propagation channels of source- destination (S-D) link and relay-destination (R-D) link also be elegant in trim to assurer reliable and direct communication of both Cellular UEs and D2D UEs. Since centralized algorithm claim exact channel state information (CSI) of all links including the channels between cellular UEs and base station, among UEs in the base station should be involved by reducing the effect of interference, ensue in the inflation of base stations load. Hence, propose a distributed relay selection method. This method at first synchronize the intrusion sustain by the coexistence of D2D system and rule out improper relays in the system. Next, to the highest relay is exclusive and set to each users amongst the permissive relays undermine a facile distributed method. Numerical outcome spectacle that depiction of the proposed framework is overtake than process that randomly pick best relay and made close to the centralized method. B.System Model The Multiple Cellular UEs intercommunicate with base station on M different cellular networks which may not be in near proximity can be reused by traditional UEs during both uplink (UL) and downlink (DL) . The D2D UEs must ensure their power constraints and sharing of cellular resources operate in same frequency spectrum that result in the failure of cellular link. During the uplink period, D2D UEs only need to keeps the interference of their signals within the wireless users, that are disjoint of licensed network. Contribution management view at entire authorized users if they degrade the downlink resources of cellular users. Thus, we desire to provide the appropriate resources and focusing on the uplink interference yield by the cointegrate of the channel-based resource allocation. In particular we define that there are control channels to find the best cellular resource between the D2D users and route discovery. Channel state information (CSI) increases the complexity and assumptive to be best at the receiver, but the forward and backward channels are formal. As a outcome, CSI can obtained by transmitter through an effective way response from the receiver. At the same time, both the D2D pairs and optional relays cannot acquire CSI between base stations , and no interference communicate to each users. Channel selection and base station interference is not calculated accurately. Fig.1. Proposed Block Diagram A.Channel Model Latterly, over 10 GHz of frequency above 24 GHz is vacant by the Federal Communications Commission (FCC) for fifth generation wireless communications. The features of low latency of the mm Wave frequency bands support 38 GHz band. Here consider relay-assisted D2D communication in millimeter system that operates on the frequency of 38 GHz. The contribution of existing state of this paper is organized as follows. In Section II the channel model is introduced. Section III introduces the rate estimation frame work. A compressive measurement protocol is presented and linear as well as non- linear estimators that operate on the compressive measurements are introduced. Finally in Section IV conclusion is drawn. @ IJTSRD | Unique Paper ID – IJTSRD30413 | Volume – 4 | Issue – 3 | March-April 2020 Page 789
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470 The mmWave communication channel model is different from the current cellular channel model. One important difference is that multiple D2D pairs require directional antennas. By adopting the channel model introduced in peer- to-peer wireless communication and consider a completely different frequency band for both line-of-sight (LOS) and non line-of-sight( NLOS) cases. We consider potential NLOS communications if the line-of-sight is blocked due to reflections. Let z denote the distance between the transmitter and receiver. The path loss function L(z) in dB is receiver j can be represented as hℎ?,?=??,?/?(??,?), where ??,? is the distance between the corresponding devices. B.Throughput of a User Pair To determine the throughput of a user pair, first require the signal-to-interference plus noise ratio (SINR) in each hop of the D2D communication. For user pair ??=(??,??) which is assisted by relay rj , we denote Psi, rj as the transmit power of source device si to relay rj. We denote the transmit power of relay rj to destination device di as Prj, di. The signal-to- interference plus noise ratio from source si to relay rj is where hLI, Prj, di represents the loop-interference received by full-duplex relay rj and N0 is the noise power. In each group the loop-interference channel gain hLI to determine the loop-interference power received by the full-duplex relay. The loop interference channel gain hLI is defined as the ratio between the transmit power of full-duplex relay and received loop-interference power. Imperfect loop- interference cancellation is due to leakage of power from the transmitter to its receiver in full-duplex relay. The user pair of each orthogonal channel is allocated to avoid the mutual interference of user pairs . The SINR from relay rj to device of destination di is Where (L_LOS ) (Z_0 ) and (L_NLOS ) (Z_0 ) are the free-space path losses at reference distance z0 for line-of-sight and non line-of-sight signals, respectively. Moreover, α_LOS and α_NLOS are the path loss exponents for LOS and NLOS cases, and Zσ_LOS and Zσ_NLOS are zero-mean Gaussian random variables with standard deviations σ_LOS and α_NLOS that model the deployed schemes of LOS and NLOS real systems.LOS and NLOS parameters is determined by channel estimation. Channel estimation is performed by the transmitter and receiver channel periodically to manage resources by overlapping and minimizing pilot sequences orthogonally. In mm Wave technology, antenna gain is improved by directional antennas. A sectored directional transmitting antenna channel model is proposed at the center of the cell. The general equation to model the channel gain of antenna is given as: G (dB) = Antenna gain-path loss-Shadowing. Here use sectored directional antenna channel model, where the main lobe achieve a constant high gain and side lobe achieve a constant low gain . Let t represent the angle of departure of channel. The transmitting antenna gain is given as follows: where ℎ??,?????,?? is the interference induced by source device si. In mm wave communications the source-to-relay SINR and relay-to-destination SINR is possible in NLOS due to reflections it affects the directional transmission. High transmit power induces a higher loop interference due to multi-objective optimization problem. By using a decode-and-forward protocol, in a full-duplex relaying system the throughput of each user pair li ∈L assisted by relay rj ∈R can be obtained from transmit power of mobile devices is where ??,??,???⊝?are the mainlobe gain, side lobe gain, and half power beamwidth for the transmitting antenna, respectively. Similarly, let ⊝^r represent the angle of arrival of signals. The receiving antenna gain is given as follows: III. In this work design we propose a joint relay selection and power allocation algorithm in mm wave based wireless networks for full duplex relay-assisted D2D communication . Initially we set 100 nodes for D2D communication. RESULT AND DISCUSSION Where ??,??,???⊝?are the mainlobe gain, side lobe gain, and half power beam width for the receiving antenna, respectively. The antenna gain between i and j devices is denoted as where ⊝?.?? is the angle of departure of channel from transmitter i to receiver j, and ⊝?,?? is the angle of arrival of channel in receiver j sent from transmitter i. If i and j belong to transmitting and receiving pair of communicating devices, ⊝?.?? and ⊝?,?? are both 0∘. we assume the transmitting and receiving antennas frequency resource are aligned accurately. The total gain of antenna and channel gains between transmitter i and Fig.2. Node Creation @ IJTSRD | Unique Paper ID – IJTSRD30413 | Volume – 4 | Issue – 3 | March-April 2020 Page 790
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470 After creating the node the relay allocation process is started. Two relay allocation algorithm is used that are Centralized Relay Selection and Power Allocation Algorithm, Distributed Relay Selection and Power Allocation Algorithm. Fig.6. Total transmit power versus number of D2D user pairs Fig.3. One-to-one matching with virtual relays Fig.7. Total transmit power versus number of relays In the fig 1.6 and 1.7 shows the transmit power of D2D user pair and relays. Compare the total transmit power of devices in our proposed algorithms with that obtained by ARS and DRS algorithms for different number of D2D user pairs. The proposed centralized algorithm substantially outperforms ARS. The proposed distributed algorithm outperforms DRS. The centralized algorithm results less transmit power than ARS i.e) 37%, and our distributed algorithm achieves less transmit power than DRS i.e) 26%. The optimal solution is achieved by centralized algorithm based on stable matching in proposed distributed algorithm with weighted matching obtain a exceed solution than DRS. Fig.4. Total transmit power versus number of D2D user pairs Fig.5. System throughput versus number of D2D user pairs In the fig 1.4 and 1.5 shows the transmit power and system throughput of D2D user pair. Here the transmit power of proposed system is very low compare to existing system. So it saves the energy of the D2D user pairs. The system throughput of proposed system is very high compare to existing system. So the proposed system is provide high speed communication Fig .8. Total transmit power versus loop-interference channel gain @ IJTSRD | Unique Paper ID – IJTSRD30413 | Volume – 4 | Issue – 3 | March-April 2020 Page 791
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470 The fig 1.8. shows the total transmit power versus different loop-interference channel gain. The gain range should be considered from -108dB to -100dB. If the total transmits power increases as the loop-interference channel gain also increases. This will result in a higher transmitting power due to stronger loop-interference. The proposed centralized algorithm achieves lower transmit power 38% compared to ARS. The distributed algorithm achieves DRS by 32%. Fig .11. System throughput versus loop-interference channel gain The fig 1.11 shows the System throughput versus loop- interference channel gain. Compare the system throughput versus different loop-interference channel gain. If the loop- interference channel gain increases the system throughput also slightly decreases. This will result in a lower throughput due to stronger loop interference. However, our proposed centralized algorithm always achieves a higher throughput than ARS and our distributed algorithm achieves throughput than DRS. Fig.9. System throughput versus number of D2D user pairs Fig .10. System throughput versus number of relays In the fig 1.9 and 1.10 shows the System throughput of D2D user pair and relays. When there are four relays in the network compare the system throughput with different number of D2D user pairs . The above results shows that our proposed centralized algorithm achieves a higher throughput and our proposed distributed algorithm obtains a higher throughput compared to ARS and DRS under 13 D2D user pairs. The centralized algorithm achieves 12% higher throughput than ARS and our distributed algorithm outperforms DRS by 15%. Improvement of throughput of proposed algorithm over ARS and DRS increases the user pairs. Relay selection and power allocation is obtained by maximizing the throughput. Fig.12. Optimal power consumption @ IJTSRD | Unique Paper ID – IJTSRD30413 | Volume – 4 | Issue – 3 | March-April 2020 Page 792
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470 REFERENCES [1]G. Zhang, K. Yang, P. Liu, and J. Wei, “Power allocation for full-duplex relaying-based D2D communication underlaying cellular networks,” IEEE Trans. Veh. Technol., vol. 64, no. 10, pp. 4911–4916, Oct. 2015. [2]H. Xing and M. Renfors, “Resource management schemes for network assisted device-to-device communication for an integrated OFDMA cellular system,” in Proc. IEEE Int. Symp. Pers., Indoor Mobile Radio Commun. (PIMRC), Hong Kong, Aug. 2015, pp. 1520–1525. [3]H. A. Suraweera, I. Krikidis, G. Zheng, C. Yuen, and P. J. Smith, “Low-complexity optimization in MIMO full duplex relay systems,” IEEE Trans. Wireless Commun., vol. 13, no. 2, pp. 913–927, Feb. 2014. end-to-end performance [4]H. Shi, R. Prasad, V. Rao, I. Niemegeers, and M. Xu, “Spectrum- and energy-efficient D2D WRAN,” IEEE Commun. Mag., vol. 52, no. 7, pp. 38–45, Jul. 2014. Fig.13. Optimal system throughput Fig 1.12 and 1.13 shows the optimal power consumption and Optimal system throughput. Centralized algorithm is obtained by the optimal total transmit power and system throughput when λ1 =1and we vary λ2. According to the weight coefficient we have to observe that the optimal solution is sensitive. λ2 is increased by improving the throughput. Power is reduced by increased throughput. In this case, more power is consumed to achieve a higher throughput to find the optimal solution. The above results also show that the increment of the throughput is not as fast as the increment of the power. If the transmit power increases the marginal throughput increment becomes smaller . To balance the total transmit power and system throughput the marginal throughput increment provides useful insights of the system design. IV. CONCLUSION Thus, the relay-assisted D2D communication for full duplex in mm wave based 5G networks using joint relay selection and power allocation problem was formulated . Here, we proposed modelling approach to balance the trade- off between total transmit power and system throughput based on multi-objective optimization problem . The optimization problem eliminates loop-interference cancellation for mm wave full- duplex relaying systems. The QoS requirements is considered between D2D and cellular layers to explore the possibilities for different applications as well as the proximity and hop gains of peer discovery and relays. The problem convergence with message passing strategy which is complex to solve the proposed scheme using standard optimization techniques. To mitigate the complexity of resource allocation problem and combinatorial problem, we extended potential D2D users along with the problem into a one-to-one matching by considering weighted bipartite graph. We then proposed a centralized algorithm to find the solution in polynomial time. In proposed centralized algorithm we proved solution obtained is Pareto optimal .To reduce the overhead we further proposed a distributed algorithm to imposed by exchanging message passing strategies. The performance of our proposed algorithms is evaluated through simulations. The above results showed that our proposed algorithms solidly reduce the total transmit power and improve the system throughput compared to recently proposed algorithms in full duplex mode. [5]F. Wang, C. Xu, L. Song, and Z. Han, “Energy- efficient resource allocation for device-to-device underlay communication,” IEEE Trans. Wireless Commun., vol. 14, no. 4, pp. 2082–2092, Apr. 2015. [6]H. Zhang, L. Song, and Z. Han, “Radio resource allocation for device-to communication using hypergraph theory,” IEEE Trans. Wireless Commun., vol. 15, no. 7, pp. 4852– 4861, Jul. 2016. device underlay [7]Krikidis, H. A. Suraweera, P. J. Smith, and C. Yuen, “Full- duplex relay selection for amplify-and- forward cooperative networks,” IEEE Trans. Wireless Commun., vol. 11, no. 12, pp. 4381–4393, Dec. 2012. [8]J. Qiao, X. Shen, J. Mark, Q. Shen, Y. He, and L. Lei, “Enabling deviceto-device communications in millimeter-wave 5G cellular networks,” IEEE Commun. Mag., vol. 53, no. 1, pp. 209–215, Jan. 2015. [9]L. Wang, F. Tian, T. Svensson, D. Feng, M. Song, and S. Li, “Exploiting full duplex communications in heterogeneous networks,” IEEE Commun. Mag., vol. 53, no. 5, pp. 146–152, May 2015. for device-to-device [10]M. Hasan, E. Hossain, and D. I. Kim, “Resource allocation under channel uncertainties for relay- aided device-to- device communication underlaying LTE-A cellular networks,” IEEE Trans. Wireless Commun., vol. 13, no. 4, pp. 2322–2338, Apr. 2014. [11]M. N. Tehrani, M. Uysal, and H. Yanikomeroglu, “Device- to-device, r communication in 5G cellular networks: Challenges, solutions, and future directions,” IEEE Commun. Mag., vol. 52, no. 5, pp. 86–92, May 2014. [12]M. Sheng, Y. Li, X. Wang, J. Li, and Y. Shi, “Energy efficiency and delay tradeoff in device-to-device communications underlaying cellular networks,” IEEE J. Sel. Areas Commun., vol. 34, no. 1, pp. 92–106, Jan. 2016. [13]P. C. Nguyen and B. D. Rao, “Fair scheduling policies exploiting multiuser diversity in cellular systems with device-to-device communications,” Wireless Commun., vol. 14, no. 9, pp. 4757–4771, Sep. 2015. IEEE Trans. [14]X. Lin, J. G. Andrews, and A. Ghosh, “Spectrum sharing for deviceto-device communication in cellular @ IJTSRD | Unique Paper ID – IJTSRD30413 | Volume – 4 | Issue – 3 | March-April 2020 Page 793
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470 networks,” IEEE Trans. Wireless Commun., vol. 13, no. 12, pp. 6727–6740, Dec. 2014. Wireless Commun., vol. 14, no. 2, pp. 1100– 1114, Feb. 2015. [15]P. Mach, Z. Becvar, and T. Vanek, “In-band device-to- device communication in OFDMA cellular networks: A survey and challenges,” IEEE Commun. Surveys Tuts., vol. 17, no. 4, pp. 1885–1922, 4th Quart., 2015. [20]T. Riihonen, S. Werner, and R. Wichman, “Hybrid full- duplex/halfduplex relaying with transmit power adaptation,” IEEE Trans. Wireless Commun., vol. 10, no. 9, pp. 3074–3085, Sep. 2011 [16]Enable Higher Frequency Spectrum for Future Wireless, document Communications Commission, Jul. 2016. [21]X. Ma, R. Yin, G. Yu, and Z. Zhang, “A distributed relay selection method for relay assisted device-to- device communication system,” in Proc. IEEEInt. Symp. Pers.,Indoor Mobile Radio Commun. (PIMRC), Sydney, NSW, Australia, Sep. 2012, pp. 1020–1024. FCC-16–89, Federal [17]T. S. Rappaport et al., “Millimeter wave mobile communications for 5G cellular: It will work!” IEEE Access, vol. 1, pp. 335–349, May 2013. [22]Ma, H. Shah-Mansouri, and V. W. S. Wong, “A matching approach for power efficient relay selection in full duplex D2D networks,” in Proc. IEEE Int. Conf. Commun. (ICC), Kuala Lumpur, Malaysia, May 2016, pp. 1–6. [18]A. Alkhateeb, O. El Ayach, G. Leus, and R. W. Heath, Jr., “Channel estimation and hybrid precoding for millimeter wave cellular systems,” IEEE J. Sel. Topics Signal Process., vol. 8, no. 5, pp. 831–846, Oct. 2014. [23]Technical Specification Group, Radio Access Network; Study on LTE Device to Device Proximity Services- Radio Aspects (Release 12) V. 12.0, document TR 36.843, 3rd Generation Partnership Project, Mar. 2014. [19]T. Bai and R. W. Heath, Jr., “Coverage and rate analysis for millimeterwave cellular networks,” IEEE Trans. @ IJTSRD | Unique Paper ID – IJTSRD30413 | Volume – 4 | Issue – 3 | March-April 2020 Page 794