1 / 36

Automated Firewalls with Mason

Automated Firewalls with Mason. William Stearns The Institute for Security Technology Studies, Dartmouth College SANS wstearns@pobox.com http://mason.stearns.org. Getting underway…. Room monitors Evaluation forms Questions at any point Goals Basics of Linux firewalling Learning process

temple
Download Presentation

Automated Firewalls with Mason

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Automated Firewalls with Mason • William Stearns • The Institute for Security Technology Studies, Dartmouth College • SANS • wstearns@pobox.com • http://mason.stearns.org

  2. Getting underway… • Room monitors • Evaluation forms • Questions at any point • Goals • Basics of Linux firewalling • Learning process • Live demo

  3. Firewalls • One small piece of your network security • Only affects traffic going in, out, or through your firewall • Can be circumvented • TCP/IP tunneling in ssh, email, DNS, http • Using allowed ports for blocked traffic types • Additional exit points from network • Firewall system needs to be locked down tightly!

  4. Firewall types • Packet filtering • Stateful • Stateless • Proxy • Better yet, both!

  5. Choice of firewall platform • Stability • Network card support • Security and Updates • Network performance • Ability to audit and strip down • Cost • Ease of setup

  6. Linux Packet Filtering • Separation of Jobs • Kernel • Command line tools

  7. Linux Packet Filtering types • Ipfw (Linux 1.2 kernels) • Ipfwadm (Linux 2.0 kernels) • Ipchains (Linux 2.2 kernels) • Iptables (Linux 2.4 kernels)

  8. ipfw • First Linux packet filtering support • Linux 1.2 kernels • Stateless • Very limited • Only filtered on one port • Never integrated into distributions • Not supported by Mason • Ported from one of the BSD’s by Alan Cox

  9. ipfwadm • Linux 2.0 kernels • Stateless • Filters on source and destination addresses and ports • Only TCP, UDP, and ICMP • Masquerading (many-to-one NAT) • Jos Vos

  10. ipchains • Linux 2.2 kernels • Stateless • Support for ICMP subtypes, protocols other than TCP, UDP and ICMP, and inverse options. • Rusty Russell

  11. iptables • Linux 2.4 kernels • Stateful • IPV6 support • Backwards compatibility modules for ipfwadm and ipchains • Extensible tests and actions • Fully modular design

  12. Setting up firewalls • Triple threat; limited background in: • Security policies • TCP/IP (normal and attack patterns) • Connecting the two with packet filtering and other security tools. • Risk in getting it wrong. • Default allow – easy to get going • Default deny – orders of magnitude harder

  13. Approaches for creating firewalls • Prewritten list of rules • Menu interface with small set of choices • Menu interface with extensive options • Automatic construction of rules based on current network setup. • Letting the firewall build itself 

  14. Prewritten list of rules • Good if your network matches the assumptions • May need a lot of editing if not • They tend to be too permissive

  15. Menu interface with small set of choices • Good for simple networks • Poor for complex networks or non-standard networks • Poor for non-standard protocols

  16. Menu interface with extensive options • Flexible, good for complex networks • Requires a lot of expertise from the administrator

  17. Letting the firewall build itself • Flexible • Doesn’t require in-depth knowledge of firewall construction • Handles simple and complex networks • May take some time to cover all traffic types.

  18. The world’s most efficient and literal bouncer • New bouncer • Needs to be taught who can go in or out of the bar • Told to note individual’s age, whether they’re part of the owner’s family, which direction they want to go and whether they’re carrying firearms, and then ask bar owner.

  19. Initial bouncer rules • => Write down characteristics, ask owner • => block (default policy)

  20. Bouncer rules, part II • Carrying firearms => block and call police • => Write down characteristics, ask owner • => block (default policy)

  21. Bouncer rules, part III • Carrying firearms => block and call police • Leaving bar => allow to pass • => Write down characteristics, ask owner • => block (default policy)

  22. Bouncer rules, part IV • Carrying firearms => block and call police • Leaving bar => allow to pass • Entering bar, over 21 => allow to pass • => Write down characteristics, ask owner • => block (default policy)

  23. Bouncer rules, part V • Carrying firearms => block and call police • Leaving bar => allow to pass • Entering bar, over 21 => allow to pass • Part of owner’s family => allow to pass • => Write down characteristics, ask owner • => block (default policy)

  24. Bouncer rules, part VI • Carrying firearms => block and call police • Leaving bar => allow to pass • Entering bar, over 21 => allow to pass • Part of owner’s family => allow to pass • Entering bar, under 21 => block • => Write down characteristics, ask owner • => block (default policy)

  25. Bouncer rules, part VII • Carrying firearms => block and call police • Leaving bar => allow to pass • Entering bar, over 21 => allow to pass • Part of owner’s family => allow to pass • Entering bar, under 21 => block • => block (default policy)

  26. Mason and iterative creation • Start off with empty firewall • Log all unmatched packets • Watch logs for new packets • Add rule that would have matched that traffic • Keep adding rules until all traffic types encountered

  27. Iptables log format Apr 30 21:04:10 sparrow kernel: IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=73 TOS=0x00 PREC=0x00 TTL=64 ID=11339 DF PROTO=UDP SPT=33272 DPT=53 LEN=53

  28. Iptables rule format /sbin/iptables –A OUTPUT –o lo –p udp –s localhost/32 - -sport 1024:65535 –d localhost/32 - -dport domain –j ACCEPT #domain/udp (O)

  29. Live demonstration We’ll switch over to a Linux laptop for the demo and rejoin here afterwards.

  30. Customization • Existing firewall rules • Allows administrator to make modifications

  31. Starting firewall at boot • ntsysv, tksysv, or linuxconf • Manually link /etc/rc.d/init.d/firewall

  32. Troubleshooting • Turn off the firewall, see if the problem persists. • Restart the firewall try test, then run: iptables –L –n –x –v | grep –v ‘^ *0 *0 ‘ | less –S to see which rules have matched any packets.

  33. Current and Future projects • Cisco IOS • FreeBSD, OpenBSD and NetBSD – ipfilter • http://coombs.anu.edu.au/~avalon/ • Other routers and firewalls.

  34. Thanks! • Linux developers, esp. Rusty Russell • Chris Brenton (SANS, Altenet) • Steven Northcutt (SANS) • ISTS • Mason contributors – see the Credits section in the HOWTO.

  35. Where to get • Part of some Linux Distributions • Debian • Krud • Redhat Powertools up to 7.0 • http://mason.stearns.org • Many other sources

  36. References • http://mason.stearns.org • http://netfilter.samba.org • http://www.linuxdoc.org • http://www.linuxmonth.com/issue1/articles/security/index.html • wstearns@pobox.com • Questions?

More Related