130 likes | 401 Views
INSTRUCTIONS FOR AEROCHAMBER MINI* AEROSOL CHAMBER (AC). For use with Non-Invasive Ventilation. For use with Non-Invasive Ventilation. Remove the Metered Dose Inhaler (MDI) aerosol canister from the MDI boot. For use with Non-Invasive Ventilation.
E N D
For use with Non-Invasive Ventilation • Remove the Metered Dose Inhaler (MDI) aerosol canister from the MDI boot.
For use with Non-Invasive Ventilation • Insert the MDI canister into the AeroChamber mini* AC canister port.
For use with Non-Invasive Ventilation • Prime the MDI prior to use by shaking the MDI and chamber and then depressing the MDI. Repeat this step a second time.
For use with Non-Invasive Ventilation • Attach the manual resuscitator to the AeroChamber mini* AC 15mm Outside Diameter port located at the back of the Chamber.
For use with Non-Invasive Ventilation • Attach the mask to the front port of the AeroChamber mini* AC 15 mm Inside diameter.
For use with Non-Invasive Ventilation • Remove the non-invasive Ventilator Circuit from the nasal passage.
For use with Non-Invasive Ventilation • Cover the mouth and nose with the mask ensuring there is a good facemask seal.
For use with Non-Invasive Ventilation • Depress the MDI canister downward into the AeroChamber mini* AC actuator and introduce one puff of medication into the Chamber.
For use with Non-Invasive Ventilation • Manually ventilate the patient with the required volume for 15 - 20 Breaths.
For use with Non-Invasive Ventilation NOTE: For more than one dose, remove the MDI canister from the AeroChamber mini* AC, shake the canister and re-insert into the AeroChamber mini*AC canister actuator. Repeat steps 7 through 9.
For use with Non-Invasive Ventilation • Remove the mask from the patient’s face and immediately connect the non-invasive ventilator to the patient and commence with normal ventilation.