340 likes | 503 Views
News S7-Technology V4.1. S7-Technology V4.1. Leaving technical changes/improvements. New features in S7-Technology V4.1 Flexible Machine Cam Tracks Wizard auto tuning Speed controller / Position controller Wizard Brake control/ unbalanced Axis Printing in TOM Usability
E N D
S7-Technology V4.1 Leaving technical changes/improvements. • New features in S7-Technology V4.1 • Flexible Machine • Cam Tracks • Wizard auto tuning Speed controller / Position controller • Wizard Brake control/ unbalanced Axis • Printing in TOM Usability • Wizard for creating T-Station and PG/PC for routing • Wizard for Dynamic parameters • Skins/ online help French Supporting new drives • STARTER 4.1 SP1 (SINAMICS S120, FW 2.5 + SP1) • Current SINAMICS S120 FW on DVD MLFB S7-Technology V4.1 6ES7864-1CC41-0YX0 SIMATIC T - CPU – the optimal integration of Motion in the SIMATIC
Flexible Machine: New Function blocks Leaving technical changes/improvements. Easy and fast product change from the machine via function blocks: MC_ActivateTO for activating and deactivating from TO‘s MC_ActivateDPSlave activating and deactivating from DP-Slave‘s
Flexible Machine Offline Functions Leaving technical changes/improvements. • Activating and deactivating from Technology Objects in offline project. • Projecting machines from existing projects for the series machines.
Cam Tracks Leaving technical changes/improvements. Cam tracks are indicated, that several Cam outputs can be distributed to one output.
Projecting Cam Tracks Leaving technical changes/improvements. Easy projecting Cam Tracks via Wizard.
Quantities Cam’s / Cam Tracks Leaving technical changes/improvements. Increase of the number of Cam’s.
Comparison of Output Cam TO and Cam Track TO Leaving technical changes/improvements.
Comparison of Output Cam and Cam Track Leaving technical changes/improvements.
New Feature WizardAuto tuning Speed controller / Position controller
1 1 2 2 3 3 4 4 Select Drive Getting Control of drive. Starting optimizing. The sequence going on can be pursued. The parameters found out can be taken with an automatic storage in the engineering project as well as on memory card. Wizard Auto tuning Speed controller / Position controller Leaving technical changes/improvements. Automatic adjustment of the speed controller and position controller (only for SINAMICS S120). Essential simplification from the commissioning !
Wizard Brake control / „Unbalanced Axis“ Leaving technical changes/improvements. Selecting via wizard the braking behavior of the axis. Applicable at SINAMICS S120, MASTERDRIVES and SIMODRIVE drives.
Wizard Brake control / „Unbalanced Axis“ Leaving technical changes/improvements. The enable bits EIN/AUS1, AUS2, AUS3 and impulse enable bit from the Axis are coordinated with the integrated brake control of the Axis.
Printing parameters in TOM Leaving technical changes/improvements. Parameters in TOM can be printed simply.
New Feature Wizard for creating T-Station and PG/PC station for routing
Wizard create T-Station Leaving technical changes/improvements. Creating with few clicks a full T- Station (Rack, CPU, communication addresses, baud rate ), automated in STEP 7. Creating a PG/PC station automated for routing on drives.
Preset dynamic parameters via Wizard Leaving technical changes/improvements. The dynamic parameters (Jerk, and Acceleration) are calculated and adjusted by specification of speed and ramp time.
Preset dynamic parameters via Wizard Leaving technical changes/improvements. Modus user defined : User puts the values for speed and ramp time in. The dynamics values are calculated and adjusted from these values.
Preset dynamic parameters via Wizard Leaving technical changes/improvements. Modus low Dynamic: The value 50 s for the ramp time is suggested by the system. The dynamics values are calculated and adjusted from these values.
Preset dynamic parameters via Wizard Leaving technical changes/improvements. Modus middle Dynamic: The value 5 s for the ramp time is suggested by the system. The dynamics values are calculated and adjusted from these values.
Preset dynamic parameters via Wizard Leaving technical changes/improvements. Modus high Dynamic: The value 0,5 s for the ramp time is suggested by the system. The dynamics values are calculated and adjusted from these values.
News CPU 31x-T Leaving technical changes/improvements. • Extended working memory • CPU 315T-2 DP • till now 128 KByte • in the future 256 KByte • CPU 317T-2 DP • till now 512 KByte • in the future 1 MByte • Isochronous – OB61 • Isochronous connection of the S7 CPU to the PROFIBUS DP • PROFIBUS DP • GSD files for CPU 31xT-2 DP • MLFB: • CPU 315T-2 DP 6ES7315-6TH13-0AB0 • CPU 317T-2 DP 6ES7317-6TK13-0AB0 SIMATIC T- CPU, the optimal integration of motion into the SIMATIC
Supporting of new CPU31xT in SIZER V2.9 Leaving technical changes/improvements. Performance calculation and Ordering help with SIZER.
Thank you Title of the presentation