1 / 16

Getting to Know The Garmin Etrex Yellow

thane
Download Presentation

Getting to Know The Garmin Etrex Yellow

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Getting to Know The Garmin Etrex “Yellow”

    3. The Garmin Etrex Yellow This is a “durable little GPS receiver”. You can download GPS Waypoints / etc. without installing additional drivers (you do need to install other software). If you decide you want to ‘upgrade’ to a fancier unit in the future, it will be real easy (pretty much the same format + menus, just additional bells and whistles…)

    4. Warning… It is water proof, shock proof, and ALMOST kid proof (but it does not float!) You can not break it by “pushing the wrong button”…do not be afraid to experiment! Do not store this in your car during the summer! Heat will destroy it. (it is basically a small computer) If it does break, send it back to Garmin, they’ll usually send you another one.

    5. The buttons on the “left side”

    6. The buttons on the “right side”

    7. The Page Button…

    8. The “default” SkyView Page

    9. The Advanced Skyview Page

    10. The Map Page

    11. The Pointer Page

    12. The Trip Computer Page

    13. The Menu Page

    14. Getting Started: Changing the Time Zone

    15. Deleting all Waypoints Delete all of the factory pre-set waypoints (the Garmin factory in Taiwan, and Garmin headquarters in Kansas) Navigate to the Menu Page Select <WayPoints> Select <Delete All>

    16. Adding a Waypoint Press the <ENTER> button and hold it down until the Waypoint Page appears. You can scroll down and change the symbol, or the Waypoint name by highlighting either (the existing name or symbol), and pressing the <Enter> button. When you are ready to save the Waypoint, highlight <OK> and press the <Enter> button

    17. Navigating to a destination “the automatic pilot” function “Mark a Waypoint then change the coordinates of the waypoint to match the coordinates that you want to navigate towards

More Related