1 / 18

4. LINE

RESISTOR. A. Open your Titlebox B. Erase EVERYTHING on the screen (border, text) C. Draw the Resistor. 1. GRID .125 2. SNAP .125 3. Draw as shown above. 4. LINE. 5. TRIM. Do not include words or dimensions SAVEAS (not SAVE) Resistor

thor-slater
Download Presentation

4. LINE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RESISTOR A. Open your Titlebox B. Erase EVERYTHING on the screen (border, text) C. Draw the Resistor 1. GRID .125 2. SNAP .125 3. Draw as shown above 4. LINE 5. TRIM Do not include words or dimensions SAVEAS(not SAVE) Resistor Erase the Resistor, and draw the Electronic Symbol on the next slide

  2. GRID .125 SNAP .125 METER 1. Draw as shown above 2. Trim 3. Line 4. Trim 5. PL 6. Click (Start of Arrow head) 7. W 8. .125 9. 0 10. Aim towards direction of arrow point 11 .125 Do not include words or dimensions SAVEAS(not SAVE) Meter Erase the Meter, and draw the Electronic Symbol on the next slide

  3. GRID .125 SNAP .125 TRANSISTOR 1. Draw as shown 2. Arrow Head - PL 3. Click (Start of Arrow head – thick end) 4. W 5. .125 6. 0 7. Aim towards direction of arrow point 8 .125 Do not include words or dimensions SAVEAS(not SAVE) Transistor Erase the Transistor, and draw the Electronic Symbol on the next slide

  4. GRID .125 SNAP .125 ELECTROLYTIC CAPACITOR 2. Trim 1. Draw as shown above 3. Line (Plus sign) Do not include words or dimensions SAVEAS(not SAVE) Electrolytic Capacitor Erase the Electrolytic Capacitor, and draw the Electronic Symbol on the next slide

  5. GRID .125 SNAP .125 SWITCH 2. Trim 1. Draw as shown above • Draw Line on the end • Offset twice - .125 3. Offset .125 Do not include words or dimensions SAVEAS(not SAVE) Switch Erase the Switch, and draw the Electronic Symbol on the next slide 6. Trim

  6. GRID .125 SNAP .125 BATTERY 1. Draw as shown above Do not include words or dimensions SAVEAS(not SAVE) Battery Erase the Battery, and draw the Electronic Symbol on the next slide

  7. GRID .125 SNAP .125 CONNECTOR • Donut • Inside diameter 0.000 • Outside diameter .25 Do not include words or dimensions SAVEAS(not SAVE) Connector Erase the Connector, and draw the Electronic Symbol on the next slide

  8. GRID .125 SNAP .125 SPEAKER 2. Trim 1. Draw as shown above 5. Erase outside lines 3. Line 4. Offset Do not include words or dimensions SAVEAS(not SAVE) Speaker Erase the Speaker, and draw the Electronic Symbol on the next slide

  9. GRID .125 SNAP .125 PHOTO CELL 1. Open Resistor drawing • Move Circle to the right. • (Center of circle to midpoint of the resistor Line) 2. Circle 4. Two Lines 2. Arrow Heads - PL 3. Click (Start of Arrow head – point end) 4. W 5. 0 6. .125 7. Aim towards thick end of arrow point 8 .125 Do not include words or dimensions SAVEAS(not SAVE) Photo Cell Erase the Photo Cell, and draw the Electronic Symbol on the next slide

  10. GRID .125 SNAP .125 EAR PHONE 1. Arc 2. Arc 3. Copy 4. Lines 5. Trim 6. Lines 7. Circles Do not include words or dimensions SAVEAS(not SAVE) Ear Phone Erase the Ear Phone, and draw the Electronic Symbol on the next slide 8. Trim 9. Arc and Lines

  11. GRID .125 SNAP .125 ANTENNA Do not include words or dimensions SAVEAS(not SAVE) Antenna Erase the Antenna, and draw the Electronic Symbol on the next slide

  12. GRID .125 SNAP .125 NAND GATE 1. Draw as shown above 2. Trim Do not include words or dimensions SAVEAS(not SAVE) Nand Gate Erase the Nand Gate, and draw the Electronic Symbol on the next slide

  13. GRID .125 SNAP .125 DIODE Arrow Head – 1. PL 2. Click (Start of Arrow head – point end) 3. W 4. 0 (zero) 5. .125 6. Aim towards thick end of arrow point 7 .125 1. Draw as shown above Do not include words or dimensions SAVEAS(not SAVE) Diode Erase the Diode, and draw the Electronic Symbol on the next slide

  14. GRID .125 SNAP .125 LED 1. Open Diode drawing 2. Circle 3. Line Arrow Head – 1. PL 2. Click (Start of Arrow head – point end) 3. W 4. 0 (zero) 5. .125 6. Aim towards thick end of arrow point 7 .125 Do not include words or dimensions SAVEAS(not SAVE) LED Erase the LED, and draw the Electronic Symbol on the next slide

  15. GRID .125 SNAP .125 TUNING CONTROL 1. Lines, Arc Arrow Head – 1. PL 2. Click (Start of Arrow head – point end) 3. W 4. 0 (zero) 5. .125 6. Aim towards thick end of arrow point 7 .125 Do not include words or dimensions SAVEAS(not SAVE) Tuning Control Erase the Tuning Control, and draw the Electronic Symbol on the next slide

  16. GRID .125 SNAP .125 LAMP 2. Trim 1. Draw as shown above Do not include words or dimensions SAVEAS(not SAVE) Lamp Draw the Library boxes on the next slide Insert all symbols in the boxes as shown and label

  17. DO NOT DRAW ITEMS IN RED

More Related