90 likes | 116 Views
How to Properly Clean a Glass Bowl, Bong, or Pipe<br>http://threensdeep.com
E N D
Step 1 Run the dirty glass piece through hot water briefly to loosen up the resin. Step 2 Place the piece in a Ziploc bag and pour in rubbing alcohol until the piece is completely submerged.
Step 3 Close the bag and start shaking it rapidly. Step 4 At this point the rubbing alcohol should be dark brown. Pour out the rubbing alcohol and refill the bag with rubbing alcohol once more, again completely submerging the glass pipe..
Step 5 Add a good amount of Epsom salt. Close the bag and shake rapidly. The mixture will grab the resin off the sides of the piece.
Step 6 Pour out the mixture and rinse the bowl thoroughly. Make sure to run water through it to ensure that there are no remains of buildup, salt, and alcohol. Once you get a wiff of the alcohol/resin combo you will know what I mean when I say nobody wins when you don’t completely rinse it out.
Step 6 Pour out the mixture and rinse the bowl thoroughly. Make sure to run water through it to ensure that there are no remains of buildup, salt, and alcohol. Once you get a wiff of the alcohol/resin combo you will know what I mean when I say nobody wins when you don’t completely rinse it out.
Shared By • Three N’s Deep 472 East 4th Street Los Angeles, CA 90013 • Hours: Monday to Saturday 9am-6pm(PST) • Ph- ( 213 628 3542) Fax-( 213 628 3529) • threensdeep@gmail.com www.ThreeNsDeep.com