Mechanical Properties

Aug 29, 2012

710 likes | 858 Views

Stress and strain: What are they and why are they used instead of load and deformation?2. Elastic behavior: when loads are small, how much deformation occurs? What materials deform least?3. Plastic behavior: At what point to dislocations cause permanent deformation? What materials are most

Share Presentation

Embed Code

Link

thuraya

Download Presentation

Mechanical Properties

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

CHAPTER 6: MECHANICAL PROPERTIES

CHAPTER 6: MECHANICAL PROPERTIES. ISSUES TO ADDRESS. • Stress and strain : What are they and why are they used instead of load and deformation?. • Elastic behavior: When loads are small, how much deformation occurs? What materials deform least?.

928 views • 42 slides

Spot Weld Mechanical Properties

Spot Weld Mechanical Properties. Mechanical Properties. Learning Activities View Slides; Read Notes, Listen to lecture Do on-line workbook. Lesson Objectives When you finish this lesson you will understand: Peel Chisel and Tensile Mechanical testing techniques

972 views • 57 slides

Mechanical Properties of Foods

1.19k views • 41 slides

CHAPTER 7: MECHANICAL PROPERTIES

CHAPTER 7: MECHANICAL PROPERTIES. ISSUES TO ADDRESS. • Stress and strain : What are they and why are they used instead of load and deformation?. • Elastic behavior: When loads are small, how much deformation occurs? What materials deform least?.

878 views • 31 slides

Mechanical Properties of Metals

Mechanical Properties of Metals. Mechanical Properties. Stiffness - Elastic Modulus or Young’s Modulus (MPa) Strength - Yield, Ultimate, Fracture, Proof, Offset Yield. Measured as stress (MPa)

504 views • 26 slides

Mechanical Properties

Mechanical Properties. Stress-strain Diagram: Fundamentals. Stress and strain:definitions. Stress = Load/Cross-sectional area. Strain = Displacement/Reference length. Types of loading. Tension Test:engineering properties. Engineering stress= load/initial cross-sectional area=P/A 0.

557 views • 19 slides

Mechanical Properties

Mechanical Properties. Basic concepts stress and strain tensile and shear engineering and true Poisson’s ratio Modulus Deformation plastic and elastic. Mechanical Properties. Tensile properties Elastic recovery ductility. Tensile Stress and Strain. Stress

556 views • 18 slides

MECHANICAL PROPERTIES OF MATERIALS

MECHANICAL PROPERTIES OF MATERIALS. Stress‑Strain Relationships Hardness Effect of Temperature on Properties Fluid Properties Viscoelastic Behavior of Polymers. Mechanical Properties in Design and Manufacturing.

9.46k views • 71 slides

MECHANICAL PROPERTIES

MECHANICAL PROPERTIES. Determines how a material will react when it is subjected to one (or more) mechanical constraints. Examples of properties : h ardness elasticity resilience ductility malleability tensile strength. HARDNESS. Resists penetration (making a hole in it).

1.55k views • 12 slides

6. Mechanical Properties

6. Mechanical Properties. Forms of Mechanical Loading. compression. tension. shear. torsion. 6. Mechanical Properties. Stress-Strain Behaviour Linearelastic Deformation. Robert Hooke:. 6. Mechanical Properties. Stress-Strain Behaviour Nonlinearelastic Deformation.

961 views • 50 slides

Mechanical Properties of Polymers

Mechanical Properties of Polymers P olymers as materials need to be "strong" or "tough" or even "ductile". How can we define these Mechanical Properties ? How do we measure how "strong" a polymer is? What is the difference between a "strong" polymer and a "tough" one ?

6.05k views • 30 slides

Mechanical properties

Mechanical properties. Tensile test Hardness Toughness Fracture toughness Fatigue test Creep resistance. Tensile test. Yield strength Tensile strength Ductility . Tensile test. Yield strength Tensile strength Ductility . Tensile test. Yield strength Tensile strength Ductility .

406 views • 20 slides

MECHANICAL PROPERTIES

MECHANICAL PROPERTIES. ISSUES TO ADDRESS. • Stress and strain : What are they and why are they used instead of load and deformation?. • Elastic behavior: When loads are small, how much deformation occurs? What materials deform least?.

1.24k views • 56 slides

Mechanical Properties: Review

Mechanical Properties: Review. nominal (engineering). true. F. stress. A 0. strain. elastic – stretch chemical bonds. l 0. s y. plastic – rearrange chemical bonds. s (stress). Y. e (strain). Shear stress from uniaxial tension. force is normal to the plane. normal stress. F.

184 views • 4 slides

Mechanical Properties

Mechanical Properties. • Stress and strain : What are they and why are they used instead of load and deformation?. • Elastic behavior: When loads are small, how much deformation occurs? What materials deform least?.

1.47k views • 32 slides

Mechanical Properties

Mechanical Properties. ISSUES TO ADDRESS. • Stress and strain : What are they and why are they used instead of load and deformation?. • Elastic behavior: When loads are small, how much deformation occurs? What materials deform least?.

943 views • 37 slides

Mechanical Properties of Materials

Mechanical Properties of Materials.

305 views • 14 slides

Chapter 6: Mechanical Properties

Chapter 6: Mechanical Properties. ISSUES TO ADDRESS. • Stress and strain : What are they and stress-strain curve. • Elastic behavior: When loads are small, how much deformation occurs? What materials deform least?.

3.85k views • 51 slides

Mechanical properties

Mechanical properties. Tensile test Hardness Toughness Fracture toughness Fatigue test Creep resistance. Tensile test. Yield strength Tensile strength Ductility. Tensile test. Yield strength Tensile strength Ductility. Tensile test. Yield strength Tensile strength Ductility.

603 views • 20 slides

Mechanical Properties Of Materials

Mechanical Properties Of Materials. Processing of Metals - Casting. Most metals are first melted in a furnace. Alloying is done if required. Large ingots are then cast. Sheets and plates are then produced from ingots by rolling Wrought alloy products.

605 views • 30 slides

Mechanical properties

Mechanical properties. Tensile test Hardness Toughness Fracture toughness Fatigue test Creep resistance. Tensile test. Yield strength Tensile strength Ductility. Tensile test. Yield strength Tensile strength Ductility. Tensile test. Yield strength Tensile strength Ductility.

484 views • 20 slides

Mechanical Properties of Solids

Mechanical Properties of Solids. Density. Physical property of matter The ratio of an objects mass per unit volume or ρ = m/V Variable is the Greek letter “rho” ( ρ ). Specific Gravity. The ratio of the density of an object compared to the density of water.

417 views • 9 slides

More Related